How Long Does Driver Training Approval Take?

1 Answers
KeiraMarie
07/30/25 1:00am
After enrolling for a driver's license, the driving school needs to submit the materials to the vehicle management office, and the approval usually takes about two days to a week. Below are specific details about driver's licenses: 1. Classification: The Ministry of Public Security officially issued the "Motor Vehicle Driver's License Business Operation Specifications," introducing a grading system for motor vehicle driver's licenses, which divides them into 15 levels: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, P. 2. Renewal Regulations: If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of the driver's license, they can renew it for a ten-year validity period; if they have not accumulated 12 penalty points in any scoring cycle during the ten-year validity period, they can renew it for a long-term valid driver's license.
Was this review help?
20
5
Share
More Forum Discussions

Where is the Volkswagen OEM automatic headlight sensor located?

Volkswagen OEM automatic headlight sensor is located under the hood, at the upper left corner of the engine. Introduction to automatic headlights: Automatic headlights are a feature installed by some manufacturers for driver convenience, where a photosensitive control system is equipped on the front headlights. When the system detects that the external light intensity is above or below a certain threshold, the car headlights will automatically turn on or off. How automatic headlights work: LED is an electroluminescent device that uses a solid-state semiconductor chip as the light-emitting material. It emits light directly through photon emission caused by carrier recombination.
1
4
Share

How to Change Transmission Fluid?

Changing transmission fluid involves the following steps: 1. Lift the vehicle and place a large container underneath; 2. Use an appropriate screwdriver to remove the transmission cover and housing; 3. After most fluid has drained, remove the last oil pan and take off the gasket; 4. Thoroughly wipe all cleaned transmission fluid filters with lint-free cloth, then reinstall components; 5. Refill with manufacturer-specified fluid. The transmission (or gearbox) is a mechanism that alters the engine's rotational speed and torque, providing fixed or stepped gear ratios between input and output shafts. It consists of gear mechanisms and shift controls, with some vehicles featuring additional power take-off units.
5
4
Share

What are the gears of Honda 190?

Honda 190 has an international standard 6-speed gearbox, 1-N-2-3-4-5-6. The operation method for shifting gears on a motorcycle is introduced as follows: Preparation before starting: Before starting, the motorcycle is in neutral. Prepare to start by firmly gripping the clutch lever with the left hand to disengage the clutch. Press the gear shift lever down one notch with the foot (each foot gear shift needs to be operated while holding the clutch). Shift into 1st gear. Completion of starting: Slowly release the clutch lever. When releasing to the 3/4 position, simultaneously release the clutch lever while turning the throttle grip to increase the throttle and raise the engine speed, transferring the engine power to the rear wheel. When the rear wheel starts to rotate, fully release the clutch lever to engage the clutch, thus completing the starting operation.
14
4
Share

What Causes the Abnormal Noise When a Corolla is Driving at Low Speed?

Corolla low-speed driving abnormal noise causes are as follows: Body noise: This issue is usually due to insufficient body rigidity, causing the vehicle to deform during driving, resulting in friction or shaking between the doors and the frame, or friction between steel plates due to some areas being unwelded. Engine compartment noise: There are many possible causes for noise here. A high-pitched belt squeal is generally caused by belt slippage. Transmission noise: If there is abnormal noise inside the transmission while the car is moving, and it disappears when the clutch is pressed, it indicates that the noise source is a transmission fault, possibly caused by worn transmission bearings or gears.
1
1
Share

How to Open the Hood of a Sylphy?

The method to open the hood of a Sylphy is as follows: 1. The hood release lever is located under the left side of the dashboard; 2. Near the driver's knee area when seated in the driving position, simply pull the hood release lever gently, and the hood will open slightly; 3. Reach into the gap, locate the latch inside, and pull it upwards to fully open the hood; 4. Once the hood is open, use the hood support rod to prop it up securely. Taking the 2016 Sylphy as an example, it is a compact car with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. In terms of power, the 2016 Sylphy is equipped with 1.6L and 1.8L CVVT engines.
16
4
Share

How to Check the Production Date on Car Glass?

To check the production date on car glass, follow these steps: 1. The number indicates the production year of the glass; 2. The small black dots represent the production month; 3. If the black dots are before the number, subtract the number of dots from 7; 4. If the black dots are after the number, subtract the number of dots from 13 to get the production month. There is usually a code in the lower left or right corner of the car glass. Besides identifying the car manufacturer, glass brand, and national certification code, the production date of the glass is also included. Car glass is manufactured by heating the glass in a furnace to near its softening temperature, then quickly transferring it to air grids with different cooling intensities for uneven cooling, creating varying stresses between the main viewing area and the peripheral areas of the glass.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.