How Long Does Car Wax Last?

1 Answers
SanWeston
07/29/25 8:49pm
Car wax can last for 3-4 months. As a traditional car care procedure, car waxing primarily serves to waterproof and protect against acid rain. The protective layer of wax reduces water droplet adhesion on the car body by 50% to 90%. Additionally, it provides protection against high temperatures and UV rays. Precautions for car waxing are as follows: 1. Ensure the waxing environment is clean and well-ventilated; ideally, use a dedicated waxing workspace. 2. Apply car wax in a shaded area, as high surface temperatures can diminish wax adhesion and affect the waxing results. 3. Protect non-waxing areas before application. Components like rubber and plastic parts should not be waxed; use masking tape to cover these areas to prevent wax application, as dried wax can be difficult to remove.
Was this review help?
9
2
Share
More Forum Discussions

What is Vehicle and Vessel Tax?

Vehicle and Vessel Tax is a type of tax levied on the owners or managers of vehicles and vessels, with the vehicles and vessels themselves as the taxable objects. The vehicles and vessels referred to here are those that should be registered with the vehicle and vessel administration departments according to law. In China, the applicable tax amounts are implemented in accordance with the tax item amount table of the Vehicle and Vessel Tax. The financial department and the competent tax authority of the State Council may, according to actual conditions, divide sub-tax items within the prescribed tax item scope and tax amount range, and clarify the tax amount range of sub-tax items for vehicles and the specific applicable tax amounts for vessels. The specific applicable tax amounts for vehicles are determined by the people's governments of provinces, autonomous regions, and municipalities directly under the Central Government within the prescribed tax amount range of sub-tax items.
4
1
Share

Is CVT Manual or Automatic?

CVT is automatic, and this type of transmission is widely used in many automatic household cars and Japanese vehicles. The internal structure of a CVT transmission is very simple, consisting of only two pulleys and a steel belt. The steel belt can move on the pulleys, allowing the transmission to change speed and torque. The CVT transmission can achieve stepless speed regulation over a wide range, providing optimal matching between the drivetrain and engine conditions. By relying on the transmission's stepless speed adjustment to adapt to various vehicle speeds, the engine can operate at its optimal condition for extended periods, thereby improving combustion efficiency and fuel economy.
15
3
Share

How Far Beyond the Stop Line Constitutes Running a Red Light?

If a vehicle crosses the stop line during a red light but stops immediately, it will not be considered as running a red light. If the entire vehicle crosses the stop line, meaning both the front and rear wheels have crossed the stop line but not the opposite stop line, it is referred to as over-line stopping. According to Article 80 of the 'Road Traffic Safety Violation Scoring Standards': If a motor vehicle driver violates the traffic signal by crossing the stop line while waiting, a fine ranging from 20 to 200 yuan will be imposed, and 2 points will be deducted. The act of running a red light is clearly defined in the 'Road Traffic Safety Law'. Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage. If a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. Running a red light refers to the behavior where, when the vehicle is within the stop line, the forward direction is already a red light, but the vehicle continues to move forward, ultimately causing both the front and rear wheels to cross the stop line. This is determined by capturing three photos via electronic cameras: A photo of the vehicle crossing the intersection stop line, including the red light signal and license plate number. A photo of the vehicle completely crossing the stop line, including the red light signal and license plate number. A photo showing the vehicle continuing to move, comparing to see if the vehicle's position has changed, including the red light signal and license plate number. Capturing these three photos can determine that the vehicle has run a red light. Running a red light under the following circumstances is not considered a violation: Extreme weather: When visibility is very low, and even electronic police cannot clearly see the traffic lights. The photos of the violation evidence may be blurry, and if the red light is mistakenly run, the traffic police will not impose penalties. Emergency situations: After delivering a patient with an acute condition, citizens can provide proof from the hospital or the person being assisted to the traffic police for verification. If confirmed, the violation record can be cleared. If possible, it is best to call an ambulance to avoid running a red light and causing traffic accidents. Traffic police command: During peak commuting hours, traffic police may temporarily direct traffic at important intersections. Drivers must follow the gestures of the traffic police. Yielding to special vehicles: Yielding to special vehicles such as ambulances and fire trucks. If a violation is captured by surveillance cameras due to yielding to special vehicles, manual review will not record the act of running a red light. Even if recorded, an appeal can be filed with the traffic police department.
18
3
Share

What is the process of using someone else's driver's license for demerit points?

The process of using someone else's driver's license for demerit points is: 1. To use someone else's driver's license for demerit points, the license holder must personally bring their driver's license, ID card, and the vehicle's driving license to the violation handling hall for processing; 2. Submit your own driving license along with the borrowed driver's license and ID card to the staff, who will retrieve the violation record for confirmation; 3. Once the violation is confirmed to be yours, the staff will print the penalty decision form. Then, take the penalty decision form to the designated bank to pay the fine. After payment, the violation record will be cleared; 4. The fine must be paid within 15 days of receiving the penalty decision form. After 15 days, a late fee of 3% per day will be charged, but the total late fee cannot exceed the total amount of the fine.
20
2
Share

What are the symptoms of a broken shock absorber spring?

The symptoms of a broken shock absorber spring are: 1. Weak rebound of the shock absorber: The rebound force of the shock absorber is provided by the shock absorber spring absorbing road vibrations and impacts. Damage to the shock absorber spring will significantly affect the rebound force of the shock absorber; 2. Deterioration of shock absorption: The weakening of the shock absorber spring will lead to a decline in the overall shock absorption performance of the vehicle. When driving on extremely bumpy roads, there is a high risk of the shock absorber bottoming out. As an important part of the vehicle's vibration filtering system, the shock absorber primarily absorbs vibrations and impacts caused by uneven road surfaces during driving, thereby providing a comfortable and pleasant riding environment for passengers. Once the shock absorber is damaged, it can have a considerable impact on both the driving quality and safety of the vehicle.
9
0
Share

What procedures are required to release the mortgage after completing a leasing loan?

"Vehicle Registration Certificate"; Original "Motor Vehicle Mortgage Registration/Pledge Filing Application Form" with the mortgagee's official seal; Identification documents and copies of both the vehicle owner and the mortgagee; Power of attorney from the mortgagee with an official seal. Condition 1: The vehicle owner uses the vehicle as collateral for the mortgage. The correct procedures must be followed. Condition 2: Under any of the following circumstances, the mortgage release registration will not be processed: If the documents or certificates submitted by the vehicle owner are invalid; If the vehicle is legally seized or impounded by the People's Court, People's Procuratorate, or administrative law enforcement departments.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.