How Long Does Car Air Conditioning Refrigerant Last?

1 Answers
RachelMarie
07/29/25 1:32pm
Car air conditioning refrigerant can last for two to three years. Below are specific details about recharging car air conditioning refrigerant: 1. Precautions: There are two methods for recharging refrigerant—high-pressure side charging and low-pressure side charging. These are two completely different methods; one involves adding liquid, and the other involves adding gas. High-pressure side charging is typically used for the initial recharge, as it involves adding liquid, which is faster and safer. Low-pressure side charging involves adding gas, which is slower and is generally used for top-ups. 2. Temperature should be appropriate: Setting the temperature too low can affect health, so it's important to adjust the air conditioning temperature appropriately. The most comfortable temperature for the human body is between 20°C and 25°C. Above 28°C, people feel stuffy, while below 14°C, they feel cold. Therefore, the car air conditioning should maintain an interior temperature between 18°C and 25°C. Excessively low temperatures can easily make people sick.
Was this review help?
19
0
Share
More Forum Discussions

Which brand is the transmission of the Lynk & Co 03?

The transmission brand of the Lynk & Co 03 depends on the engine: 1. Models with the 1.5L turbocharged three-cylinder engine use a domestically produced 7-speed dual-clutch transmission by Geely; 2. Models with the 2.0L turbocharged four-cylinder engine use an imported 6-speed manual transmission from Japan's Aisin. The Lynk & Co 03 is a 4-door, 5-seater compact sedan with body dimensions of 4639mm in length, 1840mm in width, 1472mm in height, a wheelbase of 2730mm, front and rear track widths of 1597mm, and a fuel tank capacity of 50L.
20
1
Share

Is the Mazda6 Ruiyi produced by Changan Mazda or FAW Mazda?

Mazda6 Ruiyi is produced by FAW Mazda, and it is a mid-size car. Taking the 2015 Mazda6 Ruiyi as an example, its body dimensions are: length 4755mm, width 1795mm, height 1440mm, wheelbase 2725mm, fuel tank capacity 64L, and curb weight 1413kg. The 2015 Mazda6 Ruiyi features a double-wishbone torsion bar independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 147PS, maximum power of 108kW, and maximum torque of 184Nm, paired with a 5-speed automatic transmission.
20
4
Share

Where is the cabin air filter located in the Nissan Livina?

The cabin air filter in the Nissan Livina is located beneath the glove compartment on the passenger side. You can access it by removing the glove box. Taking the 2015 Livina model as an example, its body dimensions are: length 4249mm, width 1699mm, height 1577mm, with a wheelbase of 2600mm. It has a fuel tank capacity of 52 liters and a trunk capacity of 371 liters, with a curb weight of 1174kg. The 2015 Livina is equipped with a 1.5L naturally aspirated engine producing maximum horsepower of 124PS, maximum power of 91kW, and maximum torque of 153Nm, paired with a continuously variable transmission.
18
3
Share

Does a New Car Still Need a Break-in Period?

New cars require a break-in period. The break-in period refers to the initial driving phase after a new car leaves the factory, during which the engine components gradually wear in smoothly. The recommended break-in mileage is approximately 1,000 to 3,000 kilometers, with the first maintenance due around 5,000 kilometers. Precautions for using a new car during the break-in period include: 1. Warm up the engine before starting; 2. Avoid emergency braking; 3. Prevent overloading; 4. Avoid long-distance trips; 5. Do not drive at high speeds; 6. Use high-quality gasoline; 7. Do not remove the speed limiter prematurely; 8. Shift gears promptly; 9. Properly adjust the ignition and fuel supply systems.
17
0
Share

Which Cars Have Night Vision Systems?

Cars equipped with night vision systems include the Mercedes-Benz S-Class and the BMW 760Li. Night vision systems utilize infrared technology to illuminate darkness, allowing drivers to see farther and more clearly at night. This technology significantly reduces the adverse visual stimulation caused by the strong headlights of oncoming vehicles and enhances the driver's ability to discern objects while driving in fog. The structural components of a night vision system consist of: 1. An infrared camera; 2. A light display system on the windshield. Taking the 2021 Mercedes-Benz S-Class Business model as an example, it is a full-size sedan with the following dimensions: length 5290mm, width 1921mm, height 1503mm, wheelbase 3216mm, fuel tank capacity 76 liters, and trunk capacity 550 liters.
10
0
Share

How to Remove and Install the Fog Lights on a Nissan Sylphy?

The steps to remove and install the fog lights on a Nissan Sylphy are as follows: 1. Use a flathead screwdriver to pry from the back of the fog light grille to release the clips inside; 2. Use a flathead screwdriver to pry the clips securing the grille to the front bumper from the front gap; 3. Remove the fog light grille and spline; 4. Unscrew the two screws; 5. Hold the side where the screws were removed and pull upwards to take out the fog light for disassembly. The functions of fog lights are: 1. Front fog lights are used to improve illumination when road conditions ahead are unclear and to alert oncoming drivers; 2. Rear fog lights help vehicles behind to spot your car in low-visibility conditions.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.