How Long Does a Minor Maintenance Take?

1 Answers
LeAriana
07/29/25 7:27pm
Generally speaking, the car maintenance cycle is every 5,000 or 10,000 kilometers or every six months, depending on the effective time or mileage of the engine oil and oil filter used in the car. The validity periods of mineral oil, semi-synthetic oil, and fully synthetic oil of different brand grades are also different. Regular maintenance is divided into the following aspects: 1. Engine oil: Every 5,000-10,000 kilometers is the best replacement cycle. If the replacement cycle is too long, it will cause wear inside the engine. In addition, vehicles used less frequently should have their oil changed every six months, as the oil will deteriorate over time and can no longer protect the engine. 2. Oil filter: If the filter becomes dirty, even if the oil is changed, its effectiveness will be reduced. It is very effective to replace the oil filter at the same time as the oil. 3. Antifreeze: When traveling in cold regions, do not forget to increase the concentration of antifreeze. Generally, the antifreeze concentration is about 30%. To prevent freezing, an optimal guarantee of 40-50% is required.
Was this review help?
12
3
Share
More Forum Discussions

What does variable valve timing mean?

This system adjusts the phase of the engine camshaft through its equipped control and execution system, allowing the timing of valve opening and closing to vary with engine speed, thereby improving air intake efficiency and increasing engine power. The principle of the system: The principle of variable valve timing technology in engines is to adjust the amount of intake (exhaust) and the timing and angle of valve opening and closing based on the engine's operating conditions. This ensures the optimal amount of air intake, improving combustion efficiency. The advantages include fuel efficiency and a high power-to-displacement ratio. The disadvantage is insufficient torque at mid-range speeds. Related models: The VVT in Korean cars is modeled after Toyota's VVT-I and Honda's VTEC technologies from Japan. However, compared to Toyota's VVT-I variable valve timing technology, VVT only involves variable valve technology and lacks timing technology. Therefore, VVT engines are indeed more fuel-efficient than conventional engines, but they still fall short of the fuel efficiency of Japanese cars like Toyota and Honda.
10
4
Share

Is Volkswagen's Full-Time Four-Wheel Drive a Pseudo Four-Wheel Drive?

Volkswagen's full-time four-wheel drive is not entirely a pseudo four-wheel drive. Here is an introduction to the relevant automotive drive systems: 1. Full-time four-wheel drive: In the transmission system of a full-time four-wheel drive vehicle, a central differential is installed to distribute power to the front and rear drive axles. Unlike part-time four-wheel drive and on-demand four-wheel drive, full-time four-wheel drive vehicles maintain four-wheel drive at all times during operation. Depending on different road conditions, the central differential distributes the engine power to the front and rear wheels in a certain proportion. 2. On-demand four-wheel drive: Structurally, it is much simpler than full-time four-wheel drive, which not only effectively reduces costs but also helps to lower the overall vehicle weight. It is suitable for models with front-engine, front-wheel drive platforms, making it possible for many SUVs or four-wheel drive sedans based on this platform to be equipped with a four-wheel drive system.
1
3
Share

What's the Difference Between 1.2L and 1.5L Displacement?

1.2L and 1.5L displacements differ in the following aspects: 1. Power Performance: The 1.2L engine delivers a maximum power of 63kW and a maximum torque of 108Nm, while the 1.5L engine offers a maximum power of 82kW and a maximum torque of 146Nm. 2. Technology: The 1.2L engine is equipped with PTEC engine technology, whereas the 1.5L engine features DVVT (Dual Variable Valve Timing) technology for intake and exhaust valves. 3. Engine Type: The 1.5L is a naturally aspirated engine. Turbocharging, an advanced technology, is more fuel-efficient, environmentally friendly, and delivers stronger power compared to naturally aspirated engines. The 1.2L is a turbocharged, direct-injection engine. Turbocharging, being an advanced technology, provides better fuel efficiency, environmental benefits, and enhanced power over naturally aspirated engines.
3
0
Share

What Causes the Feeling of Slipping During Normal Driving?

There are several reasons for slipping during normal driving: 1. Weather: Wet or rainy conditions can make the road surface slippery, reducing the friction between the tires and the road below a critical threshold, leading to insufficient traction and causing the wheels to spin, resulting in slipping. 2. Sudden braking: Locking the wheels by braking abruptly or accelerating too quickly, causing the wheels to spin, can both lead to loss of traction and slipping. 3. Front-wheel slipping: This usually occurs when accelerating too sharply while turning. To correct this, steer the front wheels straight to align with the car's direction, but avoid oversteering to prevent rear-wheel slipping. 4. Rear-wheel slipping: This typically happens when entering a curve at high speed or driving on a smooth, uneven, or highly cambered road, especially if braking too hard. When the rear wheels slip, the rear of the car may slide to one side or even spin violently. In this case, release the accelerator or brake pedal (do not press the clutch pedal) and steer in the direction the rear is sliding.
15
4
Share

Where are Chaoyang Tires produced?

Chaoyang Tires are produced in the New District of Wuxi City, Jiangsu Province. Chaoyang Tires is one of the brands under Zhongce Rubber Group Co., Ltd. The following is relevant information about tires: 1. Introduction: Tires, commonly referred to as car tires, are usually made of wear-resistant rubber materials and can be divided into solid tires and pneumatic tires. Pneumatic tires consist of an inner tube and an outer tire. Generally, manufacturers set the service life of tires at 3 years. If a vehicle is driven 20,000 kilometers a year, replacement can be considered in 2-3 years. 2. Tire pressure adjustment: It is generally recommended to check the tire pressure at least once a month for most cars, and adjustments should be made with each change of season. The ideal times for adjustment are in November and May. In November, as winter approaches, tire pressure usually decreases and should be slightly adjusted. In May, as the weather starts to get hotter, it is advisable to check if the tire pressure is normal. Special attention should be paid to the fact that as long as the tire pressure is not significantly higher than the standard range, there is no need to deliberately reduce it. If the tire pressure is adequate, there is no need to adjust it every month.
13
1
Share

Can Colorblind People Obtain a Driver's License?

People with color weakness can obtain a driver's license, but those with red-green color blindness are prohibited from doing so, as traffic regulations explicitly forbid individuals with red-green color blindness from obtaining a driver's license. Below is relevant information: 1. Color Weakness: Also known as anomalous trichromacy or color vision deficiency, color weakness is a mild form of color blindness where individuals can recognize colors but have reduced sensitivity. Those with color weakness have poorer color discrimination abilities and can only see colors when they are highly saturated or distinguish hue changes when there is a significant difference in wavelength. 2. Color Blindness: Color blindness is the complete inability to distinguish certain or all colors, which significantly impacts daily life and work. Color weakness is slightly better than color blindness, and the ability to distinguish colors can be improved by wearing color-correcting glasses. However, since there are many substandard products on the market, it is advised not to opt for cheap options and to choose only certified, quality-approved products.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.