How long does a car stay in a 4S store before it is considered a stock car?

1 Answers
ReedDella
07/29/25 7:12pm
Stock cars refer to vehicles that have been in inventory for over a year without being sold. Below are specific details about stock cars: 1. Disadvantages of stock cars: When stored for long periods without use, components such as the battery, plastic parts, and internal wiring are prone to aging. If the car is not run in time, the lubricating oil may deteriorate or solidify, leading to wear on mechanical parts. 2. Replacement of all vehicle fluids: When purchasing a stock car, fluids such as engine oil, antifreeze, and lubricating oil need to be inspected or replaced. 3. Inspection of all rubber components: Rubber parts are prone to aging and deformation, such as the car's tires. The bottom areas are particularly susceptible to deformation under pressure, and any issues require inspection or replacement.
Was this review help?
8
3
Share
More Forum Discussions

What are the differences between domestically produced Mercedes-Benz and imported Mercedes-Benz?

Domestically produced Mercedes-Benz and imported Mercedes-Benz differ in the following aspects: 1. Different production locations: Domestically produced Mercedes-Benz are manufactured in Beijing, with only 5 models available; imported Mercedes-Benz are originally produced in Germany, with a few models made in the United States, Australia, or Africa. 2. Differences in material selection and usage: Domestically produced Mercedes-Benz mostly use materials from their cooperative manufacturers; imported Mercedes-Benz materials are uniformly selected and ordered by the main Mercedes-Benz factory. Taking the 2021 Mercedes-Benz C-Class as an example, its body dimensions are: length 4784mm, width 1810mm, height 1457mm, wheelbase 2920mm, and fuel tank capacity 66l. The 2021 Mercedes-Benz C-Class is equipped with a 1.5T turbocharged engine, with a maximum power of 115kW and a maximum torque of 250Nm, paired with a 9-speed automatic transmission.
17
0
Share

Does the Range Rover have a seven-seat version?

The Range Rover does have a seven-seat version, with body dimensions as follows: length 5000mm, width 2073mm, height 1869mm, wheelbase 2922mm, front track 1693mm, rear track 1685mm, minimum ground clearance 220mm, fuel tank capacity 104 liters, and luggage compartment volume ranging from 707 to 1694 liters. The Range Rover is equipped with a 3.0T mechanical and turbocharged engine, delivering a maximum power of 265kW and maximum torque of 495Nm, paired with an 8-speed automatic transmission. It features a double-wishbone independent front suspension and a multi-link independent rear suspension.
15
4
Share

Why is the reversing image too white?

The reason why the reversing image is too white is: there is a problem with the adjustment of the reversing camera or the display screen. The function of the reversing image is: to allow the driver to see the situation behind the car on the display when reversing, to avoid accidents caused by the driver not seeing the rear situation when reversing, and to improve driving safety. The working principle of the reversing image is: it is a rearview technology based on visual measurement, which relies on the camera at the rear of the car to display the road conditions behind the car on the central display screen. The driver can move the square representing the car body freely on the screen through the touch screen. If the position is appropriate, the square will change from red to green. At this time, as long as the reverse gear is engaged and the speed is controlled, automatic reversing can be completed.
17
1
Share

What are the symptoms of a faulty clutch switch?

The symptoms of a faulty clutch switch include: 1. The engine fails to start; 2. Jerky deceleration and rough gear shifting; 3. High engine RPM after pressing the clutch. The clutch is a device that transmits the power of the car engine to the axle in an on-off manner. It is installed between the engine and the transmission and is the assembly in the car's drivetrain that directly connects to the engine. The maintenance methods for the clutch are: 1. Clean thoroughly before installation to remove anti-rust grease and debris; 2. For wet electromagnetic clutches, lubricating oil needs to be added between the friction plates during operation; 3. During coaxial installation, axial fixation is required to prevent axial movement between the driving part and the driven part; 4. For split-shaft installation, the coaxiality between the driving part and the driven part shaft should not exceed 0.1mm.
9
5
Share

How to Use the Seat Belt Pretensioner Function in Audi A6L?

Audi A6L's seat belt pretensioner function is used as follows: After fastening the seat belt, start the ignition, shift to D gear, and the seat belt will automatically tighten. The body dimensions of the Audi A6L are: length 5050mm, width 1886mm, height 1475mm, wheelbase 3024mm, minimum ground clearance 117mm, and fuel tank capacity 73L. The Audi A6L is equipped with a 2.0T turbocharged engine, with a maximum power of 140kW and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission. It uses a five-link independent suspension for both front and rear suspension types.
2
1
Share

Where is the cabin air filter located in the Dongfeng Peugeot 307?

The cabin air filter in the Dongfeng Peugeot 307 is located under the front windshield on the passenger side. The cabin air filter functions to absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. The Dongfeng Peugeot 307 has the following body dimensions: length 4212mm, width 1762mm, height 1531mm, wheelbase 2608mm, minimum ground clearance 117mm, and fuel tank capacity 60 liters. The Dongfeng Peugeot 307 is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 86 kW and maximum torque of 150 Nm, paired with a 5-speed manual transmission.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.