How Long Does a Car Smart Key Battery Last?

1 Answers
McTimothy
07/29/25 3:20pm
Car smart keys with keyless entry functionality typically last around three years, while those without keyless entry can last up to seven years. Here are the specific details about car smart key batteries: 1. With keyless entry function: Generally lasts about three years. The vehicle emits a radio frequency, and the smart key with keyless entry contains a one-to-one chip. When the vehicle's radio frequency identifies a matching chip signal, it allows unlocking or automatic unlocking. Since this involves a two-way matching process, the key must maintain a weak power consumption to ensure the chip emits a recognizable signal. Although the power consumption is minimal, it still affects battery life. 2. Without keyless entry function: Typically lasts around seven years. Keys without keyless entry do not need to continuously emit a chip signal; they only transmit a signal when the button is pressed. As a result, the battery in such remotes tends to last much longer.
Was this review help?
13
4
Share
More Forum Discussions

What is the method for testing with a cylinder pressure gauge?

Cylinder pressure gauge testing method: 1. First, use compressed air to clean the dirt around the spark plugs; 2. Remove all spark plugs. For gasoline engines, also disconnect the secondary high-voltage wires of the ignition system and securely ground them to prevent electric shock or fire; 3. Insert the conical rubber tip of the dedicated cylinder pressure gauge into the spark plug hole of the cylinder being measured, ensuring it is properly aligned and tightly secured; 4. Fully open the throttle and use the starter to rotate the crankshaft for 3 to 5 seconds (no fewer than 4 compression strokes). Stop rotating once the pressure gauge needle indicates and maintains the maximum pressure reading; 5. Remove the pressure gauge, record the reading, and press the one-way valve to reset the gauge needle to zero. Repeat this process for each cylinder, ensuring each cylinder is tested at least twice. Take the arithmetic mean of the measurements for each cylinder, compare it with the standard value, analyze the results, and determine the working condition of the cylinder.
6
1
Share

How to Reset the Sunroof on a BMW 5 Series?

Method to reset the sunroof on a BMW 5 Series: Raise the sunroof to the top and continue holding the switch for about 25 seconds. The sunroof will then operate automatically; keep holding until it stops by itself, indicating a successful initialization. The BMW 5 Series sunroof changes the traditional ventilation method, allowing wind to flow in and create an air current that draws out stale air from the cabin. The BMW 5 Series has dimensions of 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. It is equipped with a 2.0T high-power engine, delivering a maximum power of 250kw, maximum horsepower of 340ps, and maximum torque of 450nm, paired with an 8-speed automatic transmission.
2
0
Share

What Documents Are Required for the 6-Year Exemption Vehicle Inspection?

6-year exemption vehicle inspection requires: vehicle license (original and copy), ID card of the vehicle owner, compulsory traffic insurance policy, vehicle and vessel tax payment or tax exemption certificate, to be submitted to the local vehicle management office for application. If entrusting someone else to handle it, the original ID card of the agent and a written authorization signed by the vehicle owner are also required. The vehicle owner should ensure that there are no traffic violation records for their vehicle, which can be checked online or offline for any violations and dealt with promptly. On-site processing procedure: the vehicle owner directly brings the relevant documents (or the agent), may need to queue, but the application can be made on the spot, which is relatively simple.
12
2
Share

How to Turn Off CruiseMain?

CruiseMain can be turned off by following these steps: First, press the brake pedal, then press the one-touch start button, and finally press the CANCEL button on the steering wheel to turn it off. CruiseMain refers to the car's electronic cruise control system. When the cruise control system's indicator light is on, it indicates that the cruise control mode is activated. The function of cruise control is to automatically maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, ensuring stable driving. With the advancement of automotive technology, more and more cable-type throttle control methods are rapidly being replaced by electronic throttle control methods. The cable-type cruise control system mainly consists of a control switch and a control component servo.
15
2
Share

How to reset the maintenance light of the 2019 Lingpai?

Method to reset the maintenance light of the 2019 Lingpai: Start the vehicle, press and hold the TRIP button on the dashboard until the OILLIFE button and the mileage start flashing, then release. The maintenance light will be reset. The 2019 Lingpai is a new strategic mid-size model under GAC Honda, with dimensions of 4650mm in length, 1750mm in width, and 1505mm in height, and a wheelbase of 2650mm. It is positioned as a compact car. The 2019 Lingpai is equipped with a 1.0T inline three-cylinder engine codenamed P10A3, with a maximum power of 122 kW and a peak torque of 173 Nm.
20
5
Share

What is the difference between Audi 35TFSI and 40TFSI?

Here are the differences between Audi 35TFSI and 40TFSI: 1. Engine displacement: The number 35 on the rear of the car indicates that it is equipped with a 1.4T turbocharged engine; 40 indicates that it is equipped with a 2.0T turbo engine. 2. Power: The maximum power of the 1.4T engine is 110kw, and the maximum torque is 270nm; The maximum power of the 2.0T low-power engine is 140kw, and the maximum torque is 320nm. The maximum power of the 2.0T high-power engine is 185kw, and the maximum torque is 370nm.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.