How Long Does a Car Need to Be Scrapped?

1 Answers
Violet
07/29/25 4:54pm
The scrapping period for cars varies depending on the vehicle type: 1. Medium-sized rental passenger cars are used for 10 years, while large rental passenger cars are used for 12 years; 2. Rental passenger vehicles are used for 15 years; 3. Small coaching passenger cars are used for 10 years, medium-sized coaching passenger cars for 12 years, and large coaching passenger cars for 15 years; 4. Public transport passenger cars are used for 13 years; 5. Other small and micro-sized operational passenger vehicles are used for 10 years, while large and medium-sized operational passenger vehicles are used for 15 years; 6. Special school buses are used for 15 years; 7. Large and medium-sized non-operational passenger vehicles are used for 20 years; 8. Three-wheeled vehicles and low-speed trucks with single-cylinder engines are used for 9 years, while other cargo vehicles are used for 15 years; 9. Regular small cars are used for 8 years.
Was this review help?
16
1
Share
More Forum Discussions

How to delete the tire pressure monitoring indicator?

The methods to delete the tire pressure monitoring indicator: 1. After confirming that the tires are in good condition, locate the tire pressure monitoring option in the car menu on the right side of the center console, and reset it to delete the indicator; 2. Visit a nearby 4S shop or repair shop to check the tires. If no abnormalities are found, use a decoder to delete the indicator. Tire pressure monitoring systems can be divided into two types: 1. Indirect tire pressure monitoring system: It determines whether the tires are abnormal by detecting the speed difference of the tires; 2. Direct tire pressure monitoring system: It installs four tire pressure monitoring sensors inside the tires to automatically monitor the tire pressure and temperature in real time when the car is stationary or moving, and provides timely alerts for high pressure, low pressure, and high temperature to avoid traffic accidents caused by tire failures, ensuring driving safety.
4
0
Share

What should be paid attention to during the break-in period of the Tiguan L?

Tiguan L break-in period precautions: 1. Warm up before starting - turn the key to the second position and wait 5 to 10 seconds before ignition; 2. Avoid emergency braking, as it not only impacts the braking system during break-in but also increases shock loads on the chassis and engine; 3. Avoid overloading within the first 300 kilometers of driving, as operating a new vehicle at full capacity during break-in may cause damage to mechanical components. The Tiguan L is a mid-size SUV with exterior dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. It is equipped with a 1.8TSI turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
13
0
Share

What to Do When the Sagitar Fuel Tank Cover Doesn't Pop Out Automatically?

Sagitar fuel tank cover does not pop out automatically solution is: insert a small wooden piece into the gap of the fuel tank cover to pry it open while pulling the fuel tank cover's lock switch. The reasons why the Sagitar fuel tank cover does not pop out automatically are: 1. The fuel tank cover is stuck or rusted; 2. The pull line is too long; 3. The fuel tank cover pull line has fallen off; 4. The fuel tank cover spring has lost its elasticity. The Sagitar is a compact sedan under FAW-Volkswagen, equipped with a 1.2T 116 horsepower L4 engine, paired with a 5-speed manual transmission. It has a body length of 4753mm, width of 1800mm, height of 1462mm, and a wheelbase of 2731mm.
17
4
Share

Is Skoda a Joint Venture Car?

Skoda is a joint venture car. Taking the Skoda Octavia as an example: it is a compact sedan under SAIC Skoda, with exterior dimensions of 4675 mm in length, 1814 mm in width, and 1460 mm in height, a wheelbase of 2686 mm, and a trunk capacity of 590 liters. The Skoda Octavia has a body weight of 1300 kg, a top speed of 200 km/h, and its engine model is EA111, with a maximum power of 96 kW, a maximum power speed of 5000 rpm, a maximum torque of 220 Nm, and a maximum torque speed range of 1750 to 3500 rpm.
14
2
Share

Which car has a logo with the character 'Song'?

A car with the character 'Song' as its logo is a model from the BYD brand, specifically the BYD Song. The BYD Song is a 5-door, 5-seat compact SUV with exterior dimensions of 4600mm in length, 1830mm in width, and 1700mm in height, and a wheelbase of 2660mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual or automatic transmission. The BYD Song has a maximum power output of 113 kW and a maximum torque of 240 Nm. The front and rear track widths are both 1560mm, and it has a fuel tank capacity of 63 liters. The car features front-wheel drive, with a MacPherson strut independent front suspension and a multi-link independent rear suspension.
15
5
Share

What is the installation method for the timing belt of Toyota Vios?

Toyota Vios timing belt installation method is as follows: 1. Unplug the ignition coil wiring harness connector and remove the ignition coil fixing bolts; check whether the spark plug inspection terminal is damaged, whether the insulator is broken down, and whether the electrode is worn, etc.; 2. Select appropriate tools, assemble the tools, remove the spark plugs, and take out the spark plugs one by one; cover the spark plug holes on the cylinder with a cleaning cloth to prevent objects from entering the cylinder block; 3. Align the ignition coil with the spark plug, install it in place, and use tools to screw in the bolts; clean the measuring tool, measure the spark plug gap, and judge the spark plug; 4. Check whether there are any problems with the appearance of the new spark plug, install the spark plug into a special sleeve, screw it into the spark plug hole, use a digital torque wrench, adjust it to 25mm, tighten the spark plug, turn off the ignition switch, open the hood, and install the three-piece set; 5. Use a digital torque wrench to tighten it to 8mm. Start the vehicle, eliminate the fault, and tidy up the workstation.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.