···
Log in / Register

How Long Do You Need to Drive Before Going on the Highway?

4 Answers
DelBethany
08/28/25 2:06am

You must have held a driver's license for one year before driving alone on the highway. Conditions for driving on the highway: If a driver is in the probationary period and wants to drive on the highway, they must be accompanied by a driver who has held a driver's license for the same or a higher vehicle category for at least three years. For driving a small automatic passenger vehicle specially designed for disabled individuals, the accompanying driver must hold a driver's license for small automatic passenger vehicles or higher. Precautions for highway driving: Pay attention to driving speed. Driving too slowly on the highway is not necessarily safer. A speed of 80 to 100 kilometers per hour is considered relatively safe for small vehicles.

Was this review help?
13
4
Share
DelLiam
09/09/25 7:33am

When I first got my driver's license, I was so excited and wanted to hit the highway immediately. However, according to traffic laws, new drivers must wait one year before driving alone on highways. Right after passing the test, you can't drive on highways solo—you need an experienced driver with at least three years of driving experience in the passenger seat. This rule is actually very sensible. Highways involve high speeds and complex road conditions, and inexperienced drivers are more prone to serious accidents, such as misjudging distances or sudden braking leading to rear-end collisions. I remember spending my first year practicing basic skills in the city, like turning, parking, and reaction exercises. Only after completing the required period did I try driving on the highway, and it felt much safer. I recommend new drivers not rush onto highways—practice more in urban areas to gain experience first. Even after the one-year mark, gradually adapt to highway speeds. After all, safety comes first when driving—life is more important than speed.

Was this review help?
14
2
Share
Expand All
McAdeline
10/23/25 8:26am

I've been driving for over a decade and witnessed many accidents involving novices on highways, so setting a threshold for highway driving is necessary. The law stipulates that drivers with less than one year of experience cannot drive alone on highways and must be accompanied by a veteran driver with at least three years of experience. This is entirely for safety considerations, as the minimum speed on highways is over 80km/h, and inexperienced drivers with slow reactions or panic can easily cause accidents. I often remind new drivers to practice on regular roads first, mastering steady throttle and brake control before gradually progressing. Even after reaching one year of driving experience, don't rush into long highway trips—try short trips with a companion first. Safety should always be the priority; life only comes once. Take it slow to truly enjoy the pleasure of driving, and don't let recklessness ruin a wonderful journey.

Was this review help?
19
5
Share
Expand All
Archer
12/07/25 2:01am

Just one month after getting my driver's license, I wanted to challenge the highway, but regulations stopped me—I had to wait a full year before driving alone. During this time, I drove a lot in the city, gradually getting familiar with road rules and developing a feel for the car. My first real experience on the highway was accompanying a friend who had three years of driving experience; I sat in the passenger seat learning the rhythm. At the time, the fast-moving traffic on the highway was intimidating, and I felt nervous. After enduring that year, I felt much more confident when I finally tried driving alone. This legal design isn't meant to make things difficult but to give new drivers a buffer period to accumulate experience. Never skip this step out of laziness—safe growth is the right path.

Was this review help?
12
3
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Monitoring on the Regal?

To reset the tire pressure monitoring system on the Regal: Turn the ignition to ACC, access the driver information center to find the tire pressure display relearn function. Follow the prompts to deflate each tire until the system alerts for each one sequentially. After all four tires have triggered alerts, reinflate them to the specified pressure to complete the reset. The Regal is a model under Buick by Shanghai GM, with body dimensions of 4843mm in length, 1856mm in width, and 1484mm in height, and a wheelbase of 2737mm. Its advantages include a stylish and dynamic exterior design, refined interior with abundant features, and powerful performance in T-series models.
6
4
Share

What causes the abnormal noise when the BMW X3 is running?

BMW X3 running with abnormal noise may be caused by the following reasons: Oil problem: The engine oil does not fully lubricate all parts of the engine. It takes some time for new oil to evenly lubricate all components. If the noise persists after a while, it may indicate severe wear. Additionally, cleaning the internal parts of the engine can enlarge the gaps caused by wear. Poor sealing: Large gaps and poor sealing can lead to deteriorating engine conditions, which may also cause noise. It is recommended to have it checked at a repair shop. Maintenance issue: Lack of maintenance may result in excessive carbon buildup (such as in the engine, throttle, spark plugs, etc.). Cleaning at a repair shop can resolve this issue.
10
3
Share

What does Honda HISS mean?

Here is an introduction about Honda HISS: 1. Introduction: HISS stands for "Honda Ignition Security System", which is an electronic anti-theft system consisting of three main components: a microchip transponder embedded in the key handle, internally programmed with a serial number and authentication key; an ECU engine control computer module; and a sensing coil located at the lock position. After normal shutdown, a flashing red light from HISS indicates that the chip anti-theft function is active. 2. Function: The purpose of HISS is to prevent thieves from starting the vehicle. If a thief were to hotwire or use lock-picking tools to connect the vehicle's main circuit, the anti-theft program in the ECU would immediately read the microchip information in the key via the sensing coil.
6
2
Share

What is the difference between Baojun and Chevrolet car engines?

Baojun and Chevrolet car engines have no difference, they use the same engine. 1.5L naturally aspirated engine: Some models of the Baojun and Chevrolet brands use the same engine, such as the Baojun 730 equipped with a 1.5L naturally aspirated engine and the Chevrolet Cavalier or Sail 3 models with a 1.5L naturally aspirated engine, which share the same engine. Engine performance: The maximum power of this engine is 108kW, and the maximum torque is 250 Nm. The engine's maximum power speed is 5200 rpm, and the maximum torque speed ranges from 2200 to 3400 rpm. This engine is paired with either a 6-speed manual transmission or a CVT transmission.
5
3
Share

Why can't the Envision start due to low battery power?

Envision's inability to start due to low battery power can be attributed to battery aging, generator failure, or electrical leakage. Below are detailed explanations of these issues: Battery Aging: The battery is a consumable automotive component with a typical lifespan of 2-3 years, during which natural power degradation occurs. Owners should replace the battery with a new one. Generator Failure: A malfunctioning generator will fail to properly charge the battery, resulting in prolonged battery depletion. It is recommended to check whether the generator is functioning normally. Electrical Leakage: If the vehicle is equipped with numerous electrical appliances and certain devices have leakage issues, this can lead to battery depletion.
13
0
Share

What Causes the Transfer Case Vibration in Haval H9?

Haval H9 transfer case vibration is caused by the following reasons: Damage to friction plates and steel plates: The vibration in the Haval H9 transfer case is usually due to damaged internal friction plates and steel plates, which show signs of high temperature and wear. These require replacement with new friction plates. During installation, proper clearance adjustment is necessary to ensure the repaired transfer case functions correctly, completely resolving the vibration issue. Function of the transfer case: The transfer case is a transmission mechanism, primarily responsible for power transmission. Failures mainly arise from internal differential or clutch damage. The primary symptom of such failures is often vibration, which is most noticeable during startup or when turning the steering wheel to full lock. However, there's no need to worry as these issues can be repaired.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.