How long can you park on a solid white line?

1 Answers
VonOmar
07/29/25 11:55pm
Parking spaces marked with solid white lines on the roadside can be used for long-term parking. Below is an introduction to the regulations regarding temporary parking: 1. Signposted areas: Parking is prohibited in sections with no-parking signs or markings, in sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as in crosswalks and construction zones. 2. Designated areas: Parking is not allowed at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. 3. Temporary parking: Temporary parking refers to a brief stop on the right side of the road in the direction of traffic on non-prohibited road sections, with the driver not leaving the vehicle.
Was this review help?
20
3
Share
More Forum Discussions

Why Can't the Car Door Be Opened with the Key?

The reasons why the car key cannot open the door are as follows: 1. The remote key may be out of power: Remote keys use button batteries, which may not be available in convenience stores. If there are auto parts markets or 4S stores nearby, these places will definitely sell them. Car owners can buy more online for emergency use. 2. The remote key is interfered with by signals: Signal interference with the key is relatively rare. If the key battery is confirmed to have power, it can be judged as signal interference. 3. Failure of the connection device between the door handle and the door lock itself: This situation leading to the door not opening is a type of fault, and the possibility of the car owner solving it on their own is very small. The door connection mechanism may fall off due to driving bumps, and the door lock cannot sense the action of pulling the door handle. 4. The door is frozen and cannot be opened in winter: If the door lock, door handle, or door frame area is frozen in winter, the door cannot be opened with the key. Note that if the door is frozen, do not pull it violently, as this can easily damage the door.
6
4
Share

What Causes a New Energy Vehicle to Suddenly Lose Power While Driving Normally?

Possible reasons are as follows: poor contact between the battery power output plug and socket; failure of the speed control handle; power signal system failure. The following are detailed explanations of the specific causes: 1. Poor contact between the battery power output plug and socket: This is usually caused by wear and oxidation over time, leading to poor internal circuit contact. 2. Failure of the speed control handle: This is generally due to poor contact among the three wires inside the speed control handle, typically red, gray, and black, or red, green, and black. The gray or green wire is the output signal wire of the handle. It is best to cut off the middle connector of the speed control handle wiring, reconnect according to the color difference, and then wrap it with insulating tape for safety. 3. Power signal system failure: If the electric vehicle is highly intelligent, it may also experience power loss. This mainly manifests as damage to the ignition lock or poor contact between the controller and the ignition lock signal wire. The simplest solution is to enable the keyless function.
10
2
Share

What are the differences between domestically produced and imported cars?

The differences between domestically produced and imported cars are as follows: 1. Firstly, imported cars are divided into two types: regular imported cars and parallel imported cars. Simply put, regular imported cars are those purchased through 4S stores, while parallel imported cars are those directly imported from the product's country of origin by importers other than the domestic general distributor. 2. In terms of price: domestically produced cars are the cheapest; followed by parallel imported cars; the most expensive are regular imported cars. This is because parallel imported cars can bypass the general distributor, eliminating middlemen, which naturally lowers the price significantly. 3. In terms of models: through parallel imports, you can purchase models that are not available as domestically produced or regular imported cars. Additionally, depending on the import region, they are further classified into "U.S. specification cars," "European specification cars," etc. 4. In terms of subsequent car usage and after-sales services, domestically produced cars are the most convenient and worry-free; followed by regular imported cars; the worst are parallel imported cars. Parallel imported cars do not come with a warranty, requiring owners to purchase insurance themselves, and many 4S stores do not provide maintenance services for them.
19
4
Share

How to turn on the low beam lights of the Lavida?

The method to turn on the low beam lights of the Lavida: There is a set of light combination switches on the left side of the steering wheel. At night, rotating the combination switch forward one notch turns on the dashboard lights, rotating it another notch turns on the low beam lights, and rotating it one more notch turns on the high beam lights. The low beam lights have an illumination distance of about 30 to 40 meters. When driving at a speed of 55 kilometers per hour at night, if you notice a situation and immediately apply the brakes, the stopping distance is approximately 30 meters. The Lavida is an A-class sedan produced by SAIC Volkswagen. Taking the Lavida 2021 280TSI DSG Comfort Edition as an example, its body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. In terms of power, the Lavida 2021 280TSI DSG Comfort Edition is equipped with a 1.4T inline 4-cylinder turbocharged engine, with a maximum power of 110kw and a maximum torque of 250nm, matched with a 7-speed dual-clutch transmission.
4
4
Share

What Causes the Brake to Suddenly Become Hard and Unpressable While Driving?

When the brake suddenly becomes hard and unpressable while driving, it is related to a malfunction in the vacuum booster pump. Below are the reasons and solutions for the brake becoming hard: 1. Vacuum Booster Pump Air Leak: Under normal driving conditions, the negative pressure in the intake manifold draws air from the vacuum booster pump, keeping the pump in a constant state of energy storage. If the brake becomes hard upon the first press, it indicates an air leak in the vacuum booster pump. Solution: Replace the vacuum hose. 2. Speed Too Low, Gear Too High: Under normal driving conditions, the negative pressure in the intake manifold draws air from the vacuum booster pump, keeping the pump in a constant state of energy storage. If the brake becomes hard only after pressing it once, it might be due to insufficient intake negative pressure caused by low speed and high gear. Solution: Increase speed. 3. Leak in the Connecting Hose: A leak in the hose can lead to excessively low vacuum, causing the loss of power assistance and resulting in a hard brake. Solution: Inspect the vacuum hose to ensure it is sealed properly, restoring normal function.
14
4
Share

What Causes the Engine Warning Light to Illuminate and the Car to Shake?

When the engine warning light comes on accompanied by noticeable car shaking, the root cause is typically poor combustion of the air-fuel mixture. This incomplete combustion leads to carbon deposits accumulating in the engine - the primary reason for vehicle vibration. Simultaneously, when oxygen sensors detect this combustion irregularity and report it to the ECU, the system triggers the warning light. This explains why both symptoms often occur together. Several components can contribute to poor mixture combustion, including faulty spark plugs, defective ignition coils, malfunctioning fuel pumps, or clogged fuel lines. When the engine warning light activates, follow these steps: 1. First assess whether the engine is running abnormally - check for vibrations, black smoke emissions, or difficulty starting. If present, avoid restarting the engine. Important: Never attempt to restart if the red warning light is illuminated. 2. If the engine operates normally, you may drive to the nearest service center for diagnosis. Technicians can quickly retrieve trouble codes using portable diagnostic equipment to identify and address specific issues. 3. For normally functioning engines, owners may try reseating electrical connectors (poor connections sometimes cause false alerts) or cycling the ignition key to the ON position multiple times to potentially reset the system.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.