How Long Can Unused Tires Be Stored?

1 Answers
Terry
07/29/25 5:52pm
If car tires are not in use, they can generally be stored for about four years, with a maximum of five years, to avoid safety hazards caused by internal aging when used later. Precautions for using tires: Pay attention to tire pressure: Air pressure is the most critical factor affecting tires. Both too high and too low pressure will shorten their lifespan. Insufficient pressure increases tire body deformation, leading to cracks on the sidewalls; excessive pressure causes excessive stretching of the tire cords, reducing elasticity and shortening the lifespan. Regularly check front-wheel alignment: Front-wheel alignment significantly impacts tire lifespan, especially toe-in and camber angles. Excessive camber accelerates shoulder wear (uneven wear), while incorrect toe-in mainly accelerates wear on the inner or outer edges of the tire. Limit driving speed: Frequent high-speed driving significantly reduces tire lifespan. At higher speeds, tires make more contact with the ground per unit time, increasing friction and deformation frequency. This intensifies circumferential and lateral distortion of the tire body, further shortening its lifespan.
Was this review help?
17
0
Share
More Forum Discussions

Does the Spirior Need a Break-in Period?

Yes, the Spirior requires a break-in period, as every new car has one. Here are the relevant details: 1. The break-in period for the Spirior refers to the initial phase after purchasing a new car or after a major overhaul, typically covering 2000-3000 kilometers. This mileage is essential to ensure that all components fully contact, friction, adapt, and settle. 2. During this period, the car's components can adjust and enhance their ability to adapt to the environment, while also wearing down any protrusions on the parts. 3. The quality of the break-in period significantly impacts the car's lifespan, safety, and fuel efficiency. 4. Successfully completing the break-in period plays a crucial role in determining the vehicle's future durability, frequency of issues, fuel consumption, power output, and other key indicators. Below are some precautions for the Spirior's break-in period: 1. Warm-up: During a cold start, it's best to wait until the water temperature reaches at least 40°C before driving. Start gently by slowly releasing the clutch and accelerator pedal, and choose smooth roads for driving. Avoid revving the engine when parking. 2. Speed control: For a car in the break-in period, it's essential to control driving speed and avoid excessive speeds. The speed should ideally be maintained between 50-80 km/h. After driving 1500 kilometers, you can gradually increase the RPM and speed to the vehicle's maximum allowed limits, but avoid pressing the accelerator too hard to ensure that the pistons, cylinders, and other critical components increase their load under moderate conditions. 3. Frequent gear changes: Avoid using a single gear for extended periods. Start in a low gear and gradually shift to higher gears, driving progressively. Avoid situations like high speed in low gear or low speed in high gear. 4. Clutch: When braking during the break-in period, first press the clutch pedal to disengage the gear before applying the brake pedal. This reduces impact damage to the new engine, braking system, and chassis.
12
0
Share

What is the engine model of the GAC Trumpchi Yingbao?

GAC Trumpchi Yingbao's engine model is 4A15J2. The engine layout is transverse. It is equipped with a 1.5L turbocharged engine. The Trumpchi Yingbao, also known as the Trumpchi EMPOW55, made its debut at the 2020 Guangzhou International Auto Show. It is a sports sedan positioned in the compact segment, featuring a remarkably low drag coefficient of 0.26Cd. Yingbao's powertrain: The Yingbao is the first model equipped with GAC's all-new third-generation 1.5TGDI engine from the "JuLang Power" series. This engine, centered around GCCS technology, integrates dual-flow turbocharging, top-mounted water-cooled intercooler, high-pressure injection, large inertia balance shaft, intelligent thermal management, and low-friction technologies. It delivers a maximum power of 130kW and a peak torque of 270Nm. According to official data, the Yingbao's NEDC fuel consumption is 5.7L/100km. Paired with the engine is a 7-speed wet dual-clutch transmission, which is based on a globally top-ten transmission platform and independently developed by GAC. Featuring an innovative intelligent control system and a low-inertia torque converter, this transmission achieves a transmission efficiency of up to 96% with a shift time of just 0.2 seconds. Yingbao's features: In terms of driving modes, the Yingbao offers four options—ECO, COMFORT, SPORT, and SPORT+—along with a customizable driving mode. For the suspension system, the Yingbao utilizes a front MacPherson strut and rear multi-link independent suspension setup, striking a balance between handling performance and ride comfort.
18
4
Share

What car is the golden cross?

Golden cross is a Chevrolet car. Here are the detailed introductions about Chevrolet cars: 1. Overview: Chevrolet is an automobile brand under General Motors (GM) in the United States, founded on November 3, 1911, by William Durant and Louis Chevrolet. Chevrolet is also known as Chevy and was acquired by General Motors in 1918. 2. Others: The Chevrolet logo represents a stylized bowtie, and Chevrolet is named after the Swiss race car driver and engineer Louis Chevrolet. It symbolizes the generosity, style, and elegance of Chevrolet cars. Chevrolet cars have a profound historical heritage.
6
3
Share

What is the working principle of hybrid vehicles?

Working principle of hybrid vehicles: When the vehicle starts moving, the battery is fully charged, and its energy output can meet the vehicle's requirements. The auxiliary power system does not need to work. When the battery level drops below 60%, the auxiliary power system starts the vehicle. When the energy demand is high, both the auxiliary power system and the battery pack provide energy to the drive system. A hybrid electric vehicle refers to a vehicle equipped with more than one power source, including an electric motor drive, and complies with road traffic and safety regulations. The power system of a hybrid electric vehicle mainly consists of a control system, a drive system, an auxiliary power system, and a battery pack.
8
1
Share

How to Remove a Car License Plate Without Damage?

Methods to remove a car license plate without damage: 1. Prepare a flathead screwdriver and a Phillips screwdriver, as well as an angle grinder with intact cutting discs; 2. Put on gloves, connect the angle grinder to power, locate the screw caps on the car license plate, and use the angle grinder to make a straight cut on each screw cap; 3. Take the flathead screwdriver and use it to pry off the screw caps, exposing the screws underneath; 4. Use the Phillips screwdriver to unscrew all remaining screws; 5. Once the screws are removed, the license plate will come off. Remember to keep the screws and license plate safe for potential future use.
17
5
Share

How to Check the Carburetor of a Toyota Corolla?

Toyota Corolla does not have a carburetor. A carburetor automatically adjusts the mixture concentration and output according to the engine's different working state requirements. To ensure the mixed gas is evenly blended, the carburetor also has the effect of atomizing the fuel for normal engine operation. The Corolla is a compact car under Toyota, with dimensions of 4630mm in length, 1775mm in width, and 1480mm in height, and a wheelbase of 2700mm. The Corolla is equipped with safety features such as the VSC vehicle stability control system and curtain SRS airbags.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.