How Long Can the Hazard Lights Last?

1 Answers
PeytonLee
07/30/25 8:49am
New car batteries typically have sufficient charge, but hazard lights consume a current of up to 6A. For a 50AH battery, this means it can only last about 8 hours. Below is an introduction to different types of batteries: 1. Conventional Battery: The plates of a conventional battery are made of lead and lead oxide, with the electrolyte being a sulfuric acid solution. Its main advantages are stable voltage and low cost; the downsides include low energy density (the amount of energy stored per kilogram of battery), short lifespan, and frequent maintenance. 2. Dry-Charged Battery: The full name is dry-charged lead-acid battery. Its main feature is that the negative plate has a high capacity for storing electricity. In a completely dry state, it can retain the stored charge for up to two years. When in use, you only need to add the electrolyte and wait 20-30 minutes before it's ready. 3. Maintenance-Free Battery: Due to its structural advantages, maintenance-free batteries consume very little electrolyte and generally do not require distilled water replenishment during their lifespan. They are also characterized by resistance to vibration, high temperature tolerance, compact size, and low self-discharge. Their lifespan is usually twice that of conventional batteries. There are two types of maintenance-free batteries on the market: the first type is filled with electrolyte once at purchase and requires no further maintenance (no need to add supplementary fluid); the other type comes pre-filled with electrolyte and sealed from the factory, making it impossible for users to add any supplementary fluid.
Was this review help?
6
3
Share
More Forum Discussions

What are the causes of Audi's automatic start-stop system malfunction?

Audi's automatic start-stop system malfunction causes: 1. Accidental pressing of the automatic start-stop button, resulting in system shutdown. Check whether the system is turned off; 2. The seat belt is not fastened or the left front door of the vehicle is not closed; 3. Line failure or other reasons lead to the failure of the start-stop system. It is necessary to go to the 4S store for maintenance as soon as possible. Audi is a German luxury car brand, and its logo is four interlocking rings. The headquarters is located in Ingolstadt, Germany. The main models include A1, A3, A4, A5, A6, A7, A8, Q1, Q2, Q3, Q5, Q7, Q8, TT, R8, and S and RS performance series.
5
5
Share

Is Junma a Domestic or Joint-Venture Car Brand?

Junma is a domestic car brand. Introduction to Junma: Junma is an independently operated new automotive brand under Zotye Auto. It is a new brand targeting young people, creating dream vehicles for the younger generation. Junma cars feature fashionable designs and technological backgrounds in their product functionalities, differentiating themselves from other brands through convenience and user experience. Junma initially focuses on SUV series and gradually expands to various levels of sedans. Definition of Joint-Venture Cars: A joint-venture car is a project jointly established by Chinese and foreign investors. The Chinese side contributes by providing land, factory usage rights, and capital, while the foreign investors provide the brand, technology, capital, and talent. Joint-venture cars are products of such collaborations, where foreign parties supply technology, talent, and brand for domestic assembly, but the core technology remains under foreign control.
16
5
Share

Why is there no air coming out from the central air vent of the Corolla?

The reasons for no air coming out from the air conditioner are a clogged air filter or a damaged blower. Below are the relevant explanations regarding the air conditioner not blowing hot air: 1. Reasons for the air conditioner not blowing hot air: (1) When the air conditioner is heating in winter, there is a preheating stage after startup. The outdoor unit starts working first, and the indoor unit begins to blow air only after the temperature of the indoor pipes starts to rise. This is because the air conditioner has a cold air prevention function. (2) Another possibility is that during the initial period after startup, the outdoor unit may have frost buildup and needs defrosting. During this stage, the indoor unit does not operate. Defrosting usually takes about 10 minutes, and hot air will only be blown out after defrosting is completed. (3) If it is an issue with the air conditioner, it means the heating-related components are not functioning properly due to damage or malfunction. 2. Solutions for the air conditioner not blowing hot air: (1) If there is no hot air within the first 10 minutes after turning on the air conditioner, wait for a while and check again if air starts coming out. (2) Check if the fan wheel is stuck. If the fan wheel rotates freely, inspect the indoor temperature sensor and pipe temperature sensor, as the heating process involves a cold air discharge phase. (3) If there is an issue with the heating components of the air conditioner, it cannot be resolved by non-professionals. Therefore, it is necessary to call an air conditioner repair technician. Repairs are free during the warranty period, but if the warranty has expired, you will need to pay for the repairs yourself.
7
0
Share

What causes the excessive oil temperature in a BMW 523?

Both poor heat dissipation from the oil cooler and excessive engine temperature can lead to excessively high oil temperature. The impact of the oil cooler on the oil: During warm-up, the oil cooler absorbs heat from the coolant, allowing the oil temperature to rise more quickly. When the temperature becomes too high, it is cooled by the coolant. This ensures the oil temperature remains stable and maintains an appropriate viscosity. The oil cooler not only cools the oil but also helps prevent oil degradation. Excessive engine temperature: This can cause increased wear between components due to thermal expansion, reducing the engine's lifespan. Additionally, high temperatures lower the oil viscosity, further exacerbating wear between engine parts. Therefore, special attention should be paid to engine temperature during hot summer months. The normal coolant temperature is around 90°C, while the normal oil temperature should be within the range of 95-105°C. A temperature of 110°C is considered slightly high. If the oil temperature is excessively high and the fan continues to operate for cooling after the engine is turned off, it is advisable to have the vehicle inspected.
18
4
Share

Where to Place the Tire Pressure Monitoring Display?

Tire pressure monitoring displays can be placed in the reserved holes on the original vehicle, which does not take up space and is convenient for viewing. Additional tire pressure monitoring displays come in various types, including cigarette lighter-powered, solar-powered, vehicle-specific, and navigation-integrated models. Tire pressure monitoring, also known as TPMS, is used to monitor tire pressure. If a tire's pressure is too low, it will trigger an alarm to alert the driver of insufficient tire pressure, preventing abnormal tire wear due to underinflation. When tire pressure is too high, it reduces the contact area between the tire and the ground, increasing the pressure the tire bears and affecting its grip. Additionally, when driving over bumps or uneven surfaces, the tire lacks sufficient space to absorb shocks, which not only impacts driving stability and ride comfort but also increases the impact on the suspension system, leading to potential hazards.
6
2
Share

Where is the VIN number stamped on the Cadillac Escalade?

The VIN (Vehicle Identification Number) of the Cadillac Escalade is located on the driver's side of the vehicle, under the front windshield. Generally, the VIN can be found in the lower left corner of the front windshield, on the hinge pillar or lock pillar of the driver's door, or in other conspicuous places. Some models may have the VIN located in the engine compartment or on the inner side of the door near the driver's seat. The Vehicle Identification Number (VIN) is a unique 17-character alphanumeric code used to identify a vehicle. It provides information about the manufacturer, model, chassis number, and other characteristics. To avoid confusion with the numbers 1 and 0, the letters "I," "O," and "Q" are not used in VINs. The first three characters of the VIN represent the manufacturer's information, known as the World Manufacturer Identifier (WMI). Characters 4 to 8 indicate vehicle features such as model, engine, transmission, and braking system, which vary by manufacturer. The 9th character is a check digit used to verify the accuracy of the VIN. The 10th character represents the model year, the 11th character indicates the assembly plant, and characters 12 to 17 represent the production sequence number. Functions of the VIN: Determine the production year: Many vehicles are recalled due to defects. By checking the VIN, you can determine if your vehicle or a potential purchase was part of a recall batch. Identify genuine imported vehicles: The first character of the VIN indicates the country of origin. A VIN starting with "L" signifies a domestically produced vehicle, while other letters indicate an imported vehicle. Check vehicle history and maintenance records: By querying the VIN, you can access detailed maintenance records and determine if the vehicle has been involved in accidents, floods, or fires.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.