How Long Can Tesla Dash Cam Footage Be Saved?

Should an automatic transmission car be shifted to neutral when waiting at a red light?

For brief stops, it's not necessary to shift into neutral. However, for longer waits, such as those exceeding 30 seconds, it is recommended to shift into neutral and engage the handbrake. Correct methods for waiting at a red light with an automatic transmission: 1. When the light has just turned red or the remaining time is long: Shifting into neutral and engaging the handbrake is suitable for situations where the light has just turned red or there is a long remaining time. Shifting into neutral cuts off engine power, and engaging the handbrake prevents the vehicle from moving, allowing you to free your right foot from continuously pressing the brake. 2. When there are about ten seconds left on the red light: Keeping the transmission in D (Drive) and pressing the brake is suitable when there are about ten seconds left on the red light or in stop-and-go traffic. This allows for a timely start without the need for frequent gear shifting.

8

2

Share

What is the Crank Connecting Rod Mechanism Composed Of?

The crank connecting rod mechanism is composed of three parts: the engine block group, the piston connecting rod group, and the crankshaft flywheel group. Engine block group: The engine block is the framework of the engine and serves as the installation base for various mechanisms and systems of the engine. It houses all the main components and accessories of the engine, both internally and externally, and bears various loads. Therefore, the engine block must have sufficient strength and rigidity. Piston connecting rod group: The function of the piston is to form the combustion chamber together with the cylinder head and cylinder wall, and to withstand the gas pressure in the cylinder. The force is transmitted to the connecting rod through the piston pin to drive the rotation of the crankshaft. Crankshaft flywheel group: The crankshaft is one of the important components of the engine. Its function is to convert the gas force transmitted from the piston connecting rod group into the rotational torque of the crankshaft for external output, and to drive the valve mechanism and other auxiliary devices of the engine.

16

2

Share

Can Hong Kong license plates be used in mainland China?

Yes, but you must apply for a license plate from Hong Kong to mainland China. License plates, commonly known as vehicle registration plates, are the numbering and information registration for vehicles. Their main function is to identify the region to which the vehicle belongs, and the owner and registration details of the vehicle can also be traced through the license plate. Below is relevant information about license plates: 1. Vehicle license plates are the 'ID cards' of vehicles and serve as important information to distinguish them from other motor vehicles. Vehicle license plates are the abbreviated term for vehicle registration plates and vehicle driving licenses; 2. The 'Urban and Highway Traffic Management Rules (Trial)' issued in 1972 renamed the driving license as the driving permit. Generally, there are two plates, installed on the front and rear of the vehicle at designated positions as required; 3. Vehicle license plates are the legal certificates that permit vehicles to drive on roads, serving as proof for road traffic management departments, public security management departments, and the general public to monitor vehicle driving conditions, identify, remember, and trace vehicles.

3

1

Share

What is the weight of the Jetour X70 Plus in tons?

Jetour X70 Plus has a curb weight of 1.85 tons. The entry-level Jetour X70 Plus is equipped with a 10.25-inch touchscreen, CarLife, one-touch power windows for all seats, rear air vents, PM2.5 filter, and more. The top-spec Jetour X70 Plus not only features a more powerful 1.6T engine and 7DCT wet dual-clutch transmission, but also comes with L2.5-level intelligent driving assistance system, 360-degree panoramic camera, wireless charging, front seat ventilation/heating, panoramic sunroof, hands-free power tailgate, AutoHold, and numerous other configurations. The Jetour X70 PLUS 2021 model offers 2 engine options (1.5T and 1.6T) paired with either dual-clutch or manual transmission. Its engine delivers maximum power of 145.0kW (197PS), peak torque of 290.0N·m, with body dimensions of 4749×1900×1720mm.

6

4

Share

What are the reasons why a Mondeo has power but cannot start?

Mondeo has power but cannot start may be due to a faulty fuse in the fuse box, starter motor failure, ignition switch failure, etc. The following is a detailed introduction to the situation where the Mondeo cannot ignite: 1. Overview: Generally speaking, open circuits, short circuits, and damage to electrical equipment are common problems in the circuit system. Among them, aging circuit wiring and excessive load on the car circuit are the reasons. Because when the engine is working, the temperature of the ignition coil is very high, which can easily soften, age, and crack the insulation layer of the high-voltage ignition wire. The high-voltage ignition electricity can easily break down the insulation layer, causing high-voltage electricity leakage and short circuits. 2. Others: Modern cars have more and more electronic control technologies, and the application of car intelligence has greatly increased the corresponding power consumption of car electronics. The load space of the car's circuit system is limited, and the car's microcomputer, electronic components, and various sensor circuit systems are easily damaged. Adding various additional electronic equipment to the car in large quantities may also increase the burden on the car's circuit.

1

4

Share

How to reset the maintenance light on a Lynk & Co 01?

The Lynk & Co 01 does not support manual reset of the maintenance light; it requires a visit to a 4S dealership where they can use an automotive computer diagnostic tool to match and reset it. The maintenance reminder for the Lynk & Co 01 is displayed on the right side of the dashboard. If the maintenance light remains on after servicing, it indicates that the technician forgot to clear the maintenance code. In such a case, simply drive the car to a 4S dealership and have a technician use the automotive computer diagnostic tool to reset it. The Lynk & Co 01 has dimensions of 4549mm in length, 1860mm in width, and 1689mm in height, with a wheelbase of 2734mm, and a body structure of a 5-door, 5-seat SUV. The Lynk & Co 01 is equipped with a 2.0T turbocharged engine, with maximum power outputs of 160kW and 187kW, and maximum torque of 325Nm and 350Nm, paired with an 8-speed automatic transmission.

7

2

Share

How Long Can Tesla Dash Cam Footage Be Saved?

Should an automatic transmission car be shifted to neutral when waiting at a red light?

What is the Crank Connecting Rod Mechanism Composed Of?

Can Hong Kong license plates be used in mainland China?

What is the weight of the Jetour X70 Plus in tons?

What are the reasons why a Mondeo has power but cannot start?

How to reset the maintenance light on a Lynk & Co 01?

How many kilometers can a car still run when the fuel gauge reaches the red line?

Is it necessary to install both front and rear dash cams?

What is the displacement of the Dongfeng Venucia D60?

How to Maintain a Used Car After Purchase?