How Long Can Shoe Polish Last on Automotive Plastic Parts?

1 Answers
ElleLee
07/30/25 7:35am
How long shoe polish can last on automotive plastic parts mainly depends on the usage conditions. Below are specific details about automotive painting: Overview: Automotive painting refers to applying a layer of paint to the car's surface to achieve a protective effect. Automotive painting typically uses baked enamel. In automobile manufacturing plants, after the frame and body are welded, the next step is painting. Types include standard paint, metallic paint, and pearl paint. Function: The majority of automotive manufacturing materials are steel-based. Without the protection of a paint coating, prolonged exposure to wind and rain can lead to surface rust and other issues, significantly reducing the vehicle's lifespan. Besides providing excellent protection, the surface coating also enhances the car's aesthetic appeal, making it visually more attractive and stylish, while showcasing the vehicle's unique personality.
Was this review help?
6
1
Share
More Forum Discussions

How to Lock the Baojun 510 Trunk?

There are two methods to lock the Baojun 510 trunk: 1. The Baojun 510 trunk is automatically locked when the car is locked. 2. The trunk can be opened or closed electrically or via remote control. To open the trunk, simply press the button inside the car or on the remote key, and the trunk will open automatically. To close the trunk, press the close button inside the trunk, the close button inside the car, or the remote key, and the trunk will close. Here is more information about the Baojun 510 trunk: 1. The basic structure consists of two core shaft drive rods. 2. The drive rod, through the main shaft drive, is composed of an inner tube and an outer tube. The motor and gear inside the inner tube drive a threaded main shaft that moves along a threaded nut fixed to the inner side of the outer tube. 3. The electric strut uses an electric main shaft located inside the motor within the strut to open and close the trunk lid. Springs also assist in the lid opening operation.
18
3
Share

How to Remove and Install the Taillight of Qashqai?

The method for removing the taillight of Qashqai is as follows: 1. The taillights are mainly located on both sides of the rear of the vehicle, and the fastening screws are inside the car; 2. Open the tailgate to see two plastic fastening buckles inside, and use tools to remove them; 3. Open the interior trim panel to see the fastening screws inside, and remove them directly; 4. When taking out the taillight, be careful not to break the wiring harness of the taillight, and place the old taillight properly. More information about Qashqai is as follows: 1. Qashqai is the first work since the establishment of Nissan Europe Design Center. The name comes from the nomadic tribes living in the desert area of Iran, meaning "urban nomads", and its positioning is between compact SUV and hatchback. 2. Qashqai is equipped with a newly developed 1.2-liter turbocharged gasoline engine by Nissan, with peak horsepower and torque output reaching 113bhp and 190Nm respectively.
2
4
Share

What are the reasons for the rear air conditioning not blowing air in the Mercedes-Benz GLA200?

Specific reasons for the rear air conditioning not blowing air in the Mercedes-Benz GLA200: 1. Valve malfunction causing poor opening: When the plastic parts of the air outlet valve age or screws fall off, preventing normal opening and closing, it will affect the air output. The valve can be gently pried open with tools. 2. Damaged air ducts: The air ducts of car air conditioners are made of plastic, which can age, crack, or wear due to interference with other components over time. When the ducts are damaged, air will leak from the damaged areas. It is recommended to visit a 4S shop or repair shop for inspection and replacement. 3. Blocked ducts or air filter: Over time, debris such as leaves, lint, and dust can accumulate in the engine compartment, blocking the ducts and reducing the air output efficiency. If the air filter is not replaced for a long time, it can also decrease the air output efficiency. In such cases, the ducts can be disassembled to remove the debris, and the air filter should be checked regularly.
10
0
Share

What do the center console buttons of the sixth-generation Camry represent?

Introduction to the center console buttons of the sixth-generation Camry is as follows: 1. Hazard warning light (commonly known as the double flash light): Its function is to warn surrounding vehicles to prevent rear-end collisions. 2. Internal/external circulation: The difference between internal and external circulation is that internal circulation always provides air from inside the car, while external circulation allows outside air to enter and replace the original air inside the car. During traffic jams, in tunnels, or when the outside air quality does not meet standards, internal circulation should be prioritized. On highways, external circulation should be switched every hour or so to alternate the air inside and outside the car to prevent oxygen deprivation. 3. Temperature zone synchronization: The function of temperature zone synchronization is that only the driver's temperature needs to be adjusted, and the other temperature zones will follow the same change. After turning off this temperature zone synchronization, each zone can be set individually to meet the needs of passengers in different positions.
15
1
Share

Is an Annual Inspection Required Every Year After a Car Reaches 6 Years?

Vehicles must undergo an annual inspection after 6 years. Below is the relevant information about the annual inspection: 1. Inspection for local vehicles: Check whether the engine, chassis, body, and auxiliary equipment are clean, complete, and effective, and whether the paint is uniform and aesthetically pleasing. Test the vehicle's braking performance, steering control, lights, exhaust, and other safety features. Verify if the vehicle has been modified, altered, or reconstructed, and whether the registration details on the driving license, license plate, and vehicle records match the actual condition of the vehicle. 2. Inspection for out-of-town vehicles: Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle. The owner needs to obtain a vehicle inspection authorization notice from the vehicle registration office in the vehicle's registered location, authorizing an out-of-town vehicle management office to conduct the annual inspection. To apply for the vehicle inspection authorization notice, the applicant must bring their ID card, the original vehicle license, and a copy.
19
1
Share

Is the Engine of the Lynk & Co 01 Produced by Volvo?

The engine of the Lynk & Co 01 is produced by Volvo. Below are the relevant details about the Lynk & Co 01: 1. Power: It is equipped with a 2.0TD turbocharged engine from the Drive-E series, with a maximum power of 140kW/4500rpm and a maximum torque of 300Nm/1400-4000rpm. Its fuel consumption per 100 kilometers is under 7L, with the two-wheel drive model at 6.5L/100km and the four-wheel drive model at 6.9L/100km. The 0-100km/h acceleration times are 7.7s and 7.9s, respectively. 2. Configuration: The Lynk & Co 01 features a comprehensive luxury NVH configuration, which prevents noise and vibration at the source; it blocks noise transmission paths, optimizes sound quality, making it purer and more stable in frequency. It is equipped with an INFINITY Hi-Fi level 10-speaker sound system, with a total power of 360W, offering a luxury car-level audio configuration.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.