How Long Can Original Factory Tires Generally Last?

1 Answers
TaylorLee
07/30/25 7:53am
Under normal circumstances, original factory tires can last for 60,000 to 80,000 kilometers, or be used for 3 to 5 years. Here is more information about tires: 1. Concept: Tires are circular elastic rubber products assembled on various vehicles or machinery that roll on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. 2. Performance: Tires are often used under complex and harsh conditions. During driving, they endure various deformations, loads, forces, and high and low-temperature effects. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance.
Was this review help?
16
2
Share
More Forum Discussions

What are the reasons for a car not responding when starting?

Reasons for no response when starting are as follows: Battery depletion: Battery depletion does not mean the battery is completely dead, but the voltage is insufficient to start the car. In this case, you need to jump-start the car or replace the battery. Spark plug damage: Damaged spark plugs in the engine are one of the reasons why the car won't start, as the spark plugs are needed to ignite the gasoline in the cylinders to get the engine running. Distributor circuit failure: The main circuit for starting is the distributor. If the distributor is damaged, it may also cause the car to fail to start. Starter damage: The starter is primarily responsible for turning the engine during ignition. If the starter is damaged, the car won't start.
6
4
Share

What does the sixth gear on a motorcycle mean?

Motorcycle sixth gear is the gear for speeds above 80 km/h. Motorcycle speed limits: The speed of motorcycles on highways must not exceed 80 kilometers per hour. Exceeding this limit will result in penalties from traffic police. Additionally, riding on highways without wearing a helmet will lead to being stopped and fined by traffic police, and carrying passengers on highways is strictly prohibited. Precautions for motorcycle riding: Avoid racing with cars, drive safely in accordance with traffic regulations, and yield to pedestrians. Do not follow other vehicles too closely; maintain an appropriate distance behind the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; overtaking from the right side or between two parallel vehicles is prohibited.
16
2
Share

What Causes the ABS Light to Illuminate in the Emgrand GS?

ABS light illumination can occur in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS speed sensor's sensing area is covered by mud, sludge, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the contaminants from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wires or poor contact in the ABS relay can lead to signal issues and system failure. Solution: Inspect wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical components are in use, the battery voltage may drop below 10.5V. As engine speed increases and voltage rises, the ABS light turns off. This can also occur if the ABS system's power supply voltage is too low due to poor wire contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, loose wiring connections in the valve body, or ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, clean contact surfaces if necessary, check for enlarged connector gaps, and replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between rear and front wheel speed signals during high-speed driving, or incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or internal contact issues in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with a finger, then release the pedal to reset its position. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the anti-lock braking system, which can lead to wheel lock-up during emergency braking, causing loss of control and skidding. This poses significant safety risks as it may prevent the driver from slowing down or adjusting the vehicle's trajectory.
18
1
Share

Can I still check the vehicle registration cancellation on 12123?

You can still check the vehicle registration cancellation record on 12123 after the vehicle has been deregistered. Registered vehicle scrapping: When a registered motor vehicle reaches the mandatory scrapping standard set by the state, the traffic management department of the public security organ shall notify the vehicle owner to complete the deregistration process 2 months before the scrapping deadline. Failure to complete deregistration on time: If the vehicle owner fails to complete the deregistration process on time, the traffic management department of the public security organ shall announce the invalidation of the vehicle registration certificate, license plate, and driving license. The motor vehicle files will be canceled. After cancellation, if the vehicle owner applies for deregistration, it shall be processed according to the vehicle scrapping deregistration procedure.
3
5
Share

Can Hefei Apply for an Electronic Driver's License?

Hefei can apply for an electronic driver's license, and you can directly go to the vehicle management office to apply. Definition of Electronic Driver's License: As a supplement to physical documents, electronic documents can also be accepted for road inspections when physical documents are not carried. Development History of Electronic Driver's License: On April 12, 2017, Yancheng Traffic Police launched an "Electronic Driver's License," mainly to provide convenience to the public, not to advocate or encourage drivers not to carry their driver's licenses with them. On May 10, 2021, the Ministry of Public Security held a press conference to release 12 convenience measures for deepening the reform of "streamlining administration, delegating power, improving regulation, and upgrading services" in public security traffic management under the theme "I do practical things for the masses," announcing that starting from June 1, 2021, pilot projects for the electronicization of motor vehicle driver's licenses would be carried out in three cities: Tianjin, Chengdu, and Suzhou.
2
4
Share

What is required for vehicle inspection?

Vehicle inspection requires: original copy of compulsory traffic accident liability insurance certificate, safety technical inspection qualification certificate, original vehicle license, vehicle and vessel tax payment certificate, and original ID card of the vehicle owner. Vehicle inspection content: As the main technical basis for safety technical inspections such as new vehicle registration, periodic inspection of used vehicles, and accident vehicle inspection by the traffic management department of public security authorities, the inspection mainly checks vehicle exhaust, brakes, lights, chassis, etc. The inspection is divided into exhaust emission testing, axle appearance inspection, wheel weight and brake inspection, and vehicle slip offset measurement. Inspection schedule: New vehicles require an annual inspection every 2 years within the first 6 years, and annually thereafter. The purpose of the inspection is to ensure that the vehicle meets basic safety conditions for road use. After each inspection, the data will be printed on the duplicate of the vehicle license, and the displayed date indicates the next inspection time.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.