How Long Can Motor Oil Be Stored After Opening?

1 Answers
BethanyAnn
07/30/25 8:26am
Motor oil can be stored for about six months after opening. After opening, the remaining oil should be sealed as soon as possible by tightly closing the cap. It can also be sealed with wax. If wax sealing is inconvenient, you can use a clean plastic bag folded several times to cover the oil container's opening before tightening the cap for better sealing. The oil should be stored in a cool, dry place to prevent it from deteriorating quickly. The functions of motor oil: 1. Shock absorption: When the pressure in the engine cylinder rises sharply, it suddenly increases the load on the piston, piston pin, connecting rod, and crankshaft bearings. The lubrication through the bearings helps cushion the impact load. 2. Rust and corrosion prevention: Lubricating oil can adhere to the surface of parts, preventing contact with water, air, acidic substances, and harmful gases. 3. Cooling: The oil can carry heat back to the oil tank and dissipate it into the air, helping the radiator cool the engine. 4. Cleaning: Good-quality oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation, washing away dirt generated on the working surfaces of parts through the flow of the lubricating oil.
Was this review help?
7
4
Share
More Forum Discussions

Can the Great Wall Pao Passenger Version Enter Urban Areas?

The Great Wall Pao passenger version can enter urban areas. However, different regions have certain classifications regarding the entry of the Great Wall Pao passenger version into cities, mainly based on local regulations. Therefore, it is essential to pay attention to the permitted times for pickup trucks entering urban areas. Vehicles restricted in urban areas: Urban areas prohibit the passage of yellow-label vehicles, unlabeled vehicles, three-wheeled vehicles, construction waste and soil transport vehicles, sand and gravel transport vehicles, heavy and medium-duty trucks, concrete mixer trucks, and other high-emission vehicles. Violations will be corrected and penalized by the municipal public traffic management department in accordance with relevant laws and regulations. However, motor vehicles passing through the city's highways without exiting the highways are not subject to these restrictions. The following motor vehicles are not affected by the restrictions: Public buses, new energy vehicles, taxis, school buses approved by the municipal public traffic management department; unit shuttle buses (commuter buses, medium and large buses with 10 or more seats used for transporting employees to and from work), postal service vehicles, funeral vehicles from funeral parlors, large buses, interprovincial long-distance passenger vehicles, and vehicles holding tourism passenger transport certificates issued by the municipal transportation management department.
7
0
Share

Can Points Deducted One Day Before the Driving License Cycle Be Cleared?

Points deducted one day before the driving license cycle can be cleared. Below are the detailed explanations regarding the driving license cycle: 1. Cycle: The demerit point cycle for a driving license is 12 months, with a total of 12 points allocated per cycle. If the full points are deducted, corresponding penalties will be imposed. The demerit point cycle is calculated from the date the driving license is first issued. For example, if the license was obtained on June 21, 2015, then the cycle ends at 24:00 on June 20, 2016. June 21, 2015, marks the start of the next demerit point cycle, and the points will be cleared on this day. 2. Legal Basis: According to Article 55 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" issued by the Ministry of Public Security, the cumulative demerit point cycle (i.e., the demerit point cycle) for road traffic safety violations is 12 months, with a full score of 12 points, calculated from the date the motor vehicle driving license is first issued. Article 59 states that if a motor vehicle driver's demerit points do not reach 12 within a cycle and all fines have been paid, the points will be cleared. If the points do not reach 12 but there are unpaid fines, the points will carry over to the next demerit point cycle.
4
0
Share

Does Using the Blower Without AC in a Car Waste Fuel?

Using the blower without AC in a car does not waste fuel. The working principles of warm air and cold air are different. Cold air is formed by pressurizing the refrigerant through the compressor, causing it to liquefy and then vaporize, absorbing a large amount of heat from the air. When the cold air is turned on, the compressor pulley drives the compressor to work, increasing the engine load and consuming a certain amount of fuel. On the other hand, warm air comes from the heat generated during engine operation. After the engine's cooling system dissipates heat from the engine, a fan directs this heat into the car, creating warm air. Methods to reduce fuel consumption when using the car's air conditioning: Master the timing of turning on the air conditioning, adjust the airflow direction, regularly check the air conditioning vents to ensure they are unobstructed and free of debris, and alternate turning the air conditioning on and off during city driving. Reasons why using the air conditioning increases fuel consumption: Insufficient refrigerant. If the refrigeration unit lacks refrigerant, the amount of heat absorbed will decrease, not only reducing cooling efficiency but also continuously increasing fuel consumption. Setting the temperature too low. If the temperature is always set very low, the engine will keep running, consuming a lot of the car engine's power and placing greater pressure on the engine, naturally increasing fuel consumption. Failing to clean the air conditioning vents and replace the air filter on time will also cause the air conditioning to increase fuel consumption.
10
4
Share

What does 'steer towards the wider side when reversing into a parking space' mean?

When reversing a car into a parking space, the phrase 'steer towards the wider side' means: Taking left-side reversing as an example, during the process of reversing into the parking space, the car body will form an angle with the garage while moving. At this time, observe the left rearview mirror to check the width and distance between the car body and the edge of the garage in the mirror. If the distance to the left edge of the garage is found to be too large, steer to the left. If the distance to the left edge of the garage is found to be too narrow, immediately steer to the right and straighten the wheel in time to properly park the car. Similarly, when reversing to the right side, observe the right rearview mirror to check the distance between the car body and the right edge of the garage during the reversing process. Tips for reversing a car into a parking space: Drive the car forward to a point about one meter away from the front of the car next to the parking space; Then turn the steering wheel fully to the left, creating a 120-degree angle between your car and the car behind on the left; Next, shift into reverse gear, turn the wheel to the right, and start reversing, controlling the amount of wheel turn by observing the distance to the car on the right through the right rearview mirror; Begin reversing slowly. When the rear of your car passes the front of the car on the right, observe the distance to the car on the left through the left rearview mirror. If the distance on either side is significantly off, you can adjust the position by slightly turning the steering wheel; Once the car body is aligned parallel to the white line on the ground and the distance between the rear of the car and the back is controlled, the reversing into the parking space is complete.
13
0
Share

Where to check the mileage on the Trumpchi GM8?

You can view it by using the up and down buttons on the right side of the steering wheel. Below is an introduction to the GM8: 1. Exterior: The Trumpchi GM8 Master Edition boasts a majestic and imposing appearance, featuring a chrome-plated front grille with a light shield design and matrix LED headlights, delivering a strong visual impact. The side profile adopts a luxurious yacht-inspired three-dimensional design with extensive chrome trim, exuding a premium feel. The rear windows, rear windshield privacy glass, and dual electric sliding doors further enhance its upscale positioning. The rear design is broad and stable, with horizontal full-width LED taillights significantly elevating the sense of sophistication and recognition. The dual "L"-shaped chrome accents and continuous exhaust tips inject dynamic energy into the rear. The new model measures 5156/1884/1822mm in length, width, and height, with a 3000mm wheelbase, slightly longer than the standard version. 2. Interior: The cabin design follows the same style as the standard version, featuring a yacht-inspired wraparound cockpit layout. High-quality soft-touch materials are extensively used, complemented by piano black and matte chrome trim, creating an exceptionally luxurious ambiance. It also includes a yacht-style chrome gear lever and 32-color adjustable LED ambient lighting to highlight its premium appeal. 3. Powertrain: The new model is powered by Trumpchi's third-generation 390T direct-injection turbocharged engine (2.0T), delivering a maximum output of 185kW and peak torque of 390Nm, paired with an Aisin 8-speed automatic transmission.
20
4
Share

What does the GAC Trumpchi GS4 270T mean?

The GAC Trumpchi GS4 270T is a model from GAC Trumpchi's GS4 270T series. Here are the relevant details about this model: 1. Exterior Design: The vehicle continues with the Lingyun Wing design language, featuring L-shaped daytime running lights and fog lights integrated into the front bumper for high recognition. At the rear, the car is marked with the 270T emblem to indicate its identity. 2. Interior: The new model will come equipped with a brand-new three-spoke steering wheel, an electronic parking brake, and a large central control screen. 3. Powertrain: The new GS4 will utilize the 1.5T high-power version engine already used in the GS5, delivering a maximum power of 124kW (169PS) and peak torque of 265N·m, compliant with the China VI emission standards. The transmission is expected to be a 6-speed automatic gearbox.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.