How Long Can Dash Cam Videos Be Stored?

1 Answers
DelAlan
07/30/25 3:40am
Duration for which dash cam videos can be stored: A 16G memory card can record for 100 minutes; a 32G card can record for 200 minutes; a 64G card can record for 400 minutes. The storage duration of the recordings is determined by the memory card size. The dash cam records automatically and stops recording a few minutes after the vehicle is turned off. However, if the vehicle senses an impact while parked, the dash cam immediately starts recording again and returns to standby mode after a few minutes. A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. After installation, it can capture the entire driving process in video and audio, providing evidence in case of traffic accidents.
Was this review help?
19
4
Share
More Forum Discussions

Does the 2019 CR-V still have the oil dilution issue?

The 2019 Honda CR-V does not have the oil dilution issue. Here is more information about the Honda CR-V: 1. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. The CR-V features a sporty and stylish exterior design, paired with Michelin Latitude SUV tires, delivering excellent handling performance. 2. The CR-V plug-in hybrid version was developed under the concept of 'Sophisticated-Performance,' further combining Honda's advanced driving dynamics, intelligent quality, dynamic design, and cutting-edge technology. 3. The entire CR-V lineup is equipped with a 1.5T Earth Dreams Technology turbocharged engine, delivering a maximum power of 142kW (193PS)/5600rpm and a peak torque of 243N·m/2000-5000rpm, matched with a CVT transmission. The 0-100km/h acceleration time is measured at 9.5 seconds, which is not outstanding but offers a very smooth overall performance.
5
1
Share

What are the components of an engine?

An engine is composed of two major mechanisms and five major systems. The two major mechanisms are the valve train and the crankshaft connecting rod mechanism. The five major systems are the ignition system, cooling system, lubrication system, starting system, and fuel supply system. The following are detailed introductions: 1. Valve train: The engine valve train (internal combustion engine valve train) opens and closes the intake and exhaust valves of each cylinder in a timely manner according to the working cycle and ignition sequence requirements of each cylinder in the engine, allowing fresh combustible mixture (gasoline engine) or air (diesel engine) to enter the cylinder in time and exhaust gas to be discharged from the cylinder in time. During the compression and power strokes, the valves are closed to ensure the sealing of the combustion chamber. 2. Crankshaft connecting rod mechanism: The crankshaft connecting rod mechanism (crank-train) is the main moving mechanism of the engine. Its function is to convert the reciprocating motion of the piston into the rotational motion of the crankshaft, while converting the force acting on the piston into the torque output by the crankshaft to drive the car wheels. The crankshaft connecting rod mechanism is composed of piston group, connecting rod group, crankshaft, flywheel group and other components. 3. Ignition system: The ignition system is an important part of the gasoline engine. The performance of the ignition system has a great impact on the engine's power, fuel consumption and exhaust pollution. All the equipment that can generate an electric spark between the two electrodes of the spark plug is called the engine "ignition system". It is usually composed of a battery, generator, distributor, ignition coil and spark plug. 4. Cooling system: The cooling system keeps the engine within the appropriate temperature range under all operating conditions. The cooling system must prevent the engine from overheating and also prevent the engine from overcooling in winter. 5. Lubrication system: The so-called lubrication system refers to the general term for a series of oil supply, oil discharge and their auxiliary devices that supply lubricant to the lubrication parts. The lubrication system can be divided into five types, namely, circulating lubrication system, centralized lubrication system, spray lubrication system, immersion and splash lubrication system, and total loss lubrication system of oil and grease. 6. Starting system: To transition the engine from a stationary state to a working state, it is necessary to first use external force to rotate the engine's crankshaft, so that the piston makes reciprocating motion, the combustible mixture in the cylinder burns and expands to do work, pushing the piston downward to rotate the crankshaft. Only then can the engine run on its own, and the working cycle can proceed automatically. Therefore, the entire process from the rotation of the crankshaft under external force to the engine starting to idle automatically is called the starting of the engine. 7. Fuel supply system: The task of the gasoline engine fuel supply system is to prepare a certain amount and concentration of combustible mixture according to the requirements of various operating conditions of the engine, supply it to the cylinder, and make it ignite and burn near the end of compression to expand and do work. Finally, the supply system should also discharge the combustion product - exhaust gas into the atmosphere.
10
1
Share

How to reset the maintenance light on a Jeep Renegade?

First, turn off the car; then press and hold the trip meter reset button until the "SERVICE" message appears on the display. After that, turn off the engine, and the system will prompt a reset. Finally, turn the ignition button, and the reset will be completed automatically. Below is some additional information about the Bestune T77: 1. The Bestune T77 currently has 20 models available for sale, featuring a 1.2T engine with two transmission options: dual-clutch and manual. It delivers a maximum horsepower of 143 PS and a peak torque of 204.0 N·m. 2. The Bestune T77 is equipped with a golden powertrain that balances high performance and fuel efficiency, enabling smooth driving across all road conditions. Its MacPherson independent suspension ensures excellent handling stability and improves ride comfort. 3. The wet dual-clutch transmission is lightweight, precise, and operates smoothly with low noise. It offers superior handling performance, providing a comfortable driving experience and outstanding fuel economy.
16
0
Share

What Causes the Cruze Electric Fan to Run Continuously?

Causes for the Cruze electric fan running continuously: 1. There is no issue with the car's cooling system, but the air conditioning was not turned off during the last shutdown. When the car is started again, the air conditioning system activates, causing the fan to run to facilitate the condenser's operation; 2. A malfunctioning water temperature sensor prevents the engine's computer from detecting the water temperature signal, leading the engine to enter a fault mode. The Cruze is a compact sedan produced by Chevrolet, with dimensions of 4598 mm in length, 1797 mm in width, and 1477 mm in height, and a wheelbase of 2685 mm. The Cruze incorporates the contemporary fashion concept of mix-and-match in its exterior and interior design, utilizing a blend of different materials and styles to create a new three-dimensional sculpture concept on the exterior and a unique sporty dual-cockpit style in the interior.
9
4
Share

What car has the character 'Song' on it?

The car with the character 'Song' is the BYD Song, which can be considered the dual-mode version of the BYD S3, positioned as a new energy compact car. The BYD Song is equipped with a hybrid system consisting of a 1.5T engine and two electric motors, with one motor located on the front axle and the other on the rear axle, enabling four-wheel drive functionality. In terms of interior design, the BYD Song features some diagonal lines and chrome accents, creating a dynamic atmosphere. The steering wheel at the bottom is marked with a red 'Song' character, highlighting the car's identity. In terms of configuration, some models of the BYD Song come equipped with a panoramic imaging system, a large multimedia screen, a multifunction steering wheel, an electronic parking brake, automatic air conditioning, and other features.
20
3
Share

How to Open the Fuel Tank Cap of Chery Tiggo 8?

Method to open the fuel tank cap of Chery Tiggo 8: The fuel tank cap of the Tiggo 8 is of the push-type. When the vehicle is unlocked, simply press the fuel tank cap directly to open it. The Chery Tiggo 8 is a mid-size SUV under the Chery brand, with dimensions of 4700 mm in length, 1860 mm in width, and 1746 mm in height, and a wheelbase of 2710 mm. In terms of power, the Chery Tiggo 8 is equipped with a turbocharged engine, delivering a maximum horsepower of 156 hp, a maximum torque of 230 Nm, and a maximum power output of 115 kW. The engine reaches its maximum power at 5500 rpm, and the maximum torque is achieved between 1750 rpm and 4000 rpm.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.