···
Log in / Register

How Long Can China V Vehicles Remain in Use?

3 Answers
MacRobert
07/29/25 3:03pm
They can remain in use until at least 2031. Below is relevant information about China V standards: 1. Overview: China's fifth-stage motor vehicle pollutant emission standards, abbreviated as 'China V standards,' have emission control levels equivalent to Europe's currently implemented Euro 5 emission standards. The EU has been enforcing these standards since 2009, imposing stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Each upgrade from China I to China IV has reduced single-vehicle pollution by 30% to 50%. 2. Comparison with China IV standards: Compared to China IV standards, the new standards reduce nitrogen oxide emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles. Based on Shanghai's annual vehicle registration volume of approximately 350,000 units, it is estimated that annual new vehicle additions could reduce nitrogen oxide emissions by about 1,000 tons. Additionally, China's China V emission control levels are equivalent to Europe's currently implemented Euro 5 standards.
Was this review help?
10
5
Share
Randall
08/13/25 7:41am
I've been driving my China V standard car for several years, and as an ordinary car owner, my biggest concern is how much longer I can keep using it. I've heard that some major cities have already restricted high-emission vehicles from entering urban areas, like Beijing's low-emission zone policy, but it hasn't affected my small city yet. The car still runs smoothly, and I make sure to do regular maintenance every year, such as cleaning the emission system and checking the exhaust devices, which should help extend its lifespan. I looked it up online, and experts say it's generally fine to drive for 8 to 10 years under normal conditions, but policies can change quickly, and some areas might tighten standards around 2030. I need to keep an eye on announcements from the local environmental protection bureau—if they suddenly ban it from entering the inner ring road, that would be troublesome. Since changing cars is costly, I'm in no hurry and will keep using this one for now. The rising fuel prices and higher consumption are a bit painful, but still manageable. My advice to others is not to worry too much—timely maintenance is key, especially since the car hasn't reached its scrapping age yet.
Was this review help?
18
5
Share
Expand All
DiBarrett
10/11/25 6:13am
I think driving a China V compliant car is fine, but as an environmental enthusiast, I often think about pollution issues. China V vehicles have higher emissions, and now the country is promoting the China VI standard, with some cities like Shanghai already piloting restrictions on high-emission vehicles. I estimate that in five or six years, more places may follow suit, and China V car owners could face limitations. I pay attention to maintenance when driving, such as frequently changing air filters to reduce pollution; I also participate in green travel activities on weekends, driving less is better. I suggest fellow car owners assess their situation—drive if you can, but plan early to switch to new energy vehicles, like electric cars, which are both cost-saving and eco-friendly. My family has two cars, and we're preparing to phase out the older one gradually. The policy direction is towards clean transportation, and the risk of future travel restrictions is increasing, so it's important to stay updated with the news. Overall, don’t stress—enjoy driving now, but don’t delay the switch for too long.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

How many cubic meters can a 9.6-meter high-barrier truck load?

9.6-meter high-barrier truck can load cargo: approximately 50-55 cubic meters. The chassis height of a 9.6-meter high-barrier box truck is generally around 1.3-1.5 meters. The internal width of the cargo compartment is about 2.3-2.4 meters. The internal height for loading cargo is approximately 2.5-2.7 meters. Extended content, suitable cargo for box trucks: 1. Waterproof-required cargo: 9.6-meter high-barrier box trucks are more suitable for carrying various valuable materials, lightweight goods, and cargo with waterproof requirements. 2. Sleeper cab: The truck has a sleeper cab at the rear for driver rest. According to national regulations, the cab can only accommodate up to three people. 3. Middle door: For convenient loading and unloading, 9.6-meter high-barrier box trucks usually have a door on one or both sides of the cargo compartment, called the middle door. 4. Width and height: The door width is generally about 1-2 meters, and the height is around 2-2.7 meters. 5. Not suitable for large equipment: 9.6-meter high-barrier box trucks are not very suitable for transporting large equipment. 6. Difficult cargo securing: Because loading and unloading operations are challenging, cargo is not easy to secure during transportation.
6
1
Share

What is the reason for the yellow signal light in a car?

Car signal yellow light on is due to a problem in a certain part, such as transmission fault light, power steering fault light, brake system fault, etc. Car brake system fault: Car fault is a phenomenon where the car cannot perform its functions, such as difficulty in starting the engine, car malfunction, oil or water leakage, lighting system failure, etc. Common faults include sudden changes in working conditions, abnormal sounds, abnormal odors, abnormal exhaust smoke, abnormal temperature, abnormal appearance, abnormal fuel and lubricant consumption, and leakage. These common faults are often encountered during use. Solution for car signal yellow light on: Pull the car over to the side of the road, turn off the engine for 5 to 10 minutes, and do not press the brake pedal. Simply press the start button once, or turn the car key halfway to the on position without pressing the clutch. After the car is powered on, it will initiate a self-check function. Wait for 5 to 10 seconds and observe whether the fault lights on the dashboard go off, leaving only the engine fault light. If other fault lights remain on, it is necessary to go to a 4S shop or repair shop to inspect the corresponding modules and parts. If only the engine fault light remains on, start the engine again and observe whether the engine fault light still remains on.
16
3
Share

What are the gears in a manual transmission car?

Manual transmission cars have gears divided into 1st gear, 2nd gear, 3rd gear, 4th gear, 5th gear, and R gear, where 1st to 5th gears are forward gears, and R gear is the reverse gear. Below is an introduction to each gear: 1. 1st gear is the starting gear; the car should start in 1st gear when idling. The speed range for 1st gear is 0km to 15km, and it is also used for uphill and downhill driving to control speed using the engine's traction. 2. 2nd gear is engaged after starting with 1st gear, with a speed range of 10km to 25km. 3. 3rd gear is engaged after slightly accelerating in 2nd gear. Engaging 3rd gear means the car begins normal speed driving, with a speed range of 20km to 45km. 4. 4th gear is the highest gear for most urban road driving, with a speed range of 40km to 60km. 5. 5th gear is engaged when the speed reaches the necessary level for maintaining high-speed driving, with a speed range starting from 60km. 6. R gear is the reverse gear, used when reversing the car.
13
3
Share

What are the symptoms of a faulty car electronic fan temperature control switch?

The symptom of a faulty car temperature control switch is that the electronic fan behind the radiator cannot function properly. The car's radiator is located at the front of the vehicle and can be seen by opening the engine hood. The function of the electronic fan behind the radiator: The electronic fan is controlled by a thermostat. When the water temperature rises to the upper limit, the thermostat connects the power supply, and the fan starts working. When the water temperature drops to the lower limit, the thermostat disconnects the power supply, and the fan stops working. Its function is to cool the engine radiator. Reasons why the electronic fan cannot work properly: Excessive internal dust causing poor heat dissipation. Dust can slow down the fan's rotation or cause fan failure, which can also affect the operation of the car radiator fan, so it should be checked regularly. How the car temperature control works: The temperature control switch has a bimetallic strip inside with different thermal expansion coefficients, which allows it to deform at a certain critical temperature range, causing the contacts to connect. When the power supply is reached, it returns to its initial state within this temperature range and cuts off the power supply.
13
3
Share

How many OBD interfaces does a car have?

Currently, most cars use a single ECU for the engine, transmission, ABS, etc., meaning there is typically only one OBD diagnostic interface. Explanation of OBD: OBD is translated into Chinese as "On-Board Diagnostics." This system continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. Notes on OBD: When a fault occurs in the system, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. Simultaneously, the OBD system stores the fault information in memory. Using standard diagnostic tools and interfaces, this information can be read in the form of fault codes. Based on these fault codes, technicians can quickly and accurately determine the nature and location of the issue.
15
3
Share

What does deregistration of CNG cylinders for dual-fuel vehicles mean?

Deregistration of CNG cylinders for dual-fuel vehicles refers to the removal of the cylinders to convert the vehicle into a pure gasoline-powered one, but this operation is not permitted. Below is relevant information about CNG dual-fuel vehicles: 1. Definition: CNG dual-fuel vehicles refer to vehicles powered by compressed natural gas (CNG), which are a type of gas-fuel-powered automobile that uses combustible gas as an energy source. The main component of CNG is methane gas. 2. Advantages: The emissions of hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx) in the exhaust are significantly reduced, while the fuel system is cleaner, the atomization of the fuel is improved, the air-fuel mixture burns completely, and the power output is maximized.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.