How long can a vehicle still undergo inspection after missing its annual inspection?

1 Answers
LoganMarie
07/30/25 3:34am
If a vehicle completes its annual inspection within three years of missing the inspection, it can continue to be inspected. According to the mandatory scrapping standards for motor vehicles, if a vehicle has not undergone an annual inspection for more than three years, it will be forcibly scrapped. Driving a vehicle that has missed its inspection on the road will result in a fine of 200 yuan and 3 penalty points as stipulated by the Road Traffic Safety Law. Registered motor vehicles that fall under any of the following circumstances shall be mandatorily scrapped. The owner shall sell the vehicle to a scrapped motor vehicle recycling and dismantling enterprise, which will handle the registration, dismantling, destruction, etc., in accordance with regulations, and submit the vehicle's registration certificate, license plate, and driving license to the traffic management department of the public security authority for cancellation.
Was this review help?
16
5
Share
More Forum Discussions

What should be noted for the hill start in Subject 2 of the driving test?

For the hill start in Subject 2, the following points should be noted: If the clutch pedal is lifted too low during startup and does not reach the semi-engaged position, the vehicle may roll backward when the foot brake is released. To control the distance of rolling back, it is essential to release the foot brake slowly. Conversely, if the clutch pedal is lifted too high during startup, exceeding the semi-engaged position, releasing the foot brake quickly may cause the engine to stall due to a too rapid start. During the designated stop, ensuring that the front bumper of the vehicle stops within 30cm before or after the solid stop line will avoid point deductions. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skill test. The test items for small vehicles C1 and C2 include five components: reversing into a garage, parallel parking, hill start and stop, right-angle turn, and curve driving (commonly known as the S-curve).
10
3
Share

What type of engine oil should be used for the Changan CS75?

Changan CS75 requires 5W30 engine oil. As long as the specification is correct, any brand of engine oil can be used, provided that the oil is genuine and not counterfeit or substandard. Using counterfeit or substandard engine oil will not only fail to provide effective protection for the engine but may also damage it and reduce its lifespan. All currently available models of the Changan CS75 meet the China 6B emission standards. Positioned as a compact SUV, the vehicle has dimensions of 4650mm in length, 1850mm in width, and 1705mm in height, with a wheelbase of 2700mm. In terms of power, the Changan CS75 is equipped with a 1.5-liter inline 4-cylinder turbocharged engine, paired with either a 6-speed manual or a 6-speed automatic transmission, delivering a maximum power of 131 kW and a maximum torque of 265 Nm.
5
0
Share

What is the reason for the loud engine noise in the new Focus ST-Line?

The reason for the loud engine noise in the new Focus ST-Line is: the engine oil level is too low or the oil quality is too dirty. The new Focus is an A-segment family sedan, equipped with two engines, the 1.5L EcoBoost and the 1.5L Ti-VCT, paired with a 6-speed manual or automatic transmission. All models meet the China VI emission standards. In terms of body dimensions, the new Focus measures 4404mm in length, 1810mm in width, and 1454mm in height. The new Focus family adopts the ultra-cool 'Urban Functional Design,' combining high mobility performance with trendy fashion aesthetics to meet the functional and aesthetic needs of young people. The entire lineup features an 8-inch full LCD digital instrument panel paired with a 12.3-inch color touchscreen, creating a strong sense of technology with the dual large screens.
8
3
Share

Is it a Violation to Make a Left Turn from a Straight Lane and Will It Be Captured by Cameras?

Making a left turn from a straight lane is considered a traffic violation and will be captured by cameras. Below are the specific details regarding penalty points for violations: 1. Deduction of 3 points: Driving a passenger vehicle (excluding buses) or school bus with passengers exceeding the approved capacity by less than 20%; driving medium-sized or larger passenger or cargo vehicles, or hazardous material transport vehicles on roads other than highways or urban expressways, or driving other motor vehicles at speeds exceeding the limit by less than 20%; driving a truck with cargo exceeding the approved weight by less than 30%; driving a motor vehicle on a highway below the minimum speed limit; driving a motor vehicle prohibited from entering highways onto a highway; driving a motor vehicle on a highway or urban expressway without following the designated lane; driving a motor vehicle through a crosswalk without slowing down, stopping, or yielding to pedestrians; driving a motor vehicle in violation of prohibition signs or markings; driving a motor vehicle without properly overtaking or yielding, or driving in the opposite direction; driving a motor vehicle towing a trailer in violation of regulations; failing to use lights or set up warning signs after a vehicle breaks down or is involved in an accident on the road; driving a motor vehicle on the road without undergoing regular safety inspections as required. 2. Deduction of 12 points: Driving a motor vehicle that does not match the permitted vehicle type; driving under the influence of alcohol; driving a passenger vehicle (excluding buses) or school bus with passengers exceeding the approved capacity by 20% or more; fleeing the scene of a traffic accident without constituting a crime; driving a motor vehicle on the road without displaying a license plate, or intentionally obscuring, damaging, or improperly installing the license plate; using a forged or altered license plate, vehicle registration, driver's license, or school bus permit, or using another vehicle's license plate or registration; driving a school bus without the proper qualifications; driving medium-sized or larger passenger vehicles or hazardous material transport vehicles for more than 4 hours without stopping to rest or resting for less than 20 minutes; driving a motor vehicle on a highway in reverse, against traffic, or making a U-turn across the central divider; parking a passenger vehicle in a highway lane.
18
1
Share

What does the red kettle symbol on a car mean?

Car displaying a red kettle symbol indicates the engine oil pressure and oil level warning light, also known as the oil pressure warning light. When the car is first started, the indicator light on the dashboard will briefly illuminate and then turn off, which is a normal phenomenon. This happens because the engine's onboard computer performs a self-check procedure upon startup. If no issues are detected, the indicator light will turn off. If the light suddenly comes on while driving, it indicates a problem with the engine oil, such as low oil level or low oil pressure. In such cases, it is important to pull over as soon as possible and contact a professional at a 4S shop for assistance. Besides issues with the lubricating oil itself, mechanical problems can also trigger the oil pressure warning light. Common causes include: 1. Improper adjustment of the oil pressure relief valve, weak or broken spring, or leakage in the return valve; 2. Loose or broken oil inlet pipe connections; 3. Excessive wear in the crankshaft main bearings, connecting rod bearings, or camshaft bearings leading to excessive clearance.
19
2
Share

Is it better to repair or replace the original wheel hub?

Wheel hubs can be repaired, but the extent of the damage must be considered. For example, a fractured wheel hub is not recommended for repair due to safety concerns, while small gaps or dents can be repaired. With technological advancements, cars have widely adopted wheel hub units. The application and usage of wheel hub bearing units have been increasing and have now evolved to the third generation: the first generation consisted of double-row angular contact bearings. When replacing a wheel hub, the following parameters should be noted: 1. Center Bore (CB): Refers to the size of the wheel hub's center hole. Although wheel hubs with different center bore sizes from the original can be installed using adapters, this is not recommended for safety reasons. 2. Pitch Circle Diameter (PCD): For example, a wheel hub with a PCD of 5x120mm means it has 5 lug bolts forming a circle with a diameter of 120mm. This value should also match the original specifications. 3. Offset (OFFSET): Also known as the ET value. A positive offset means the mounting surface is outside the centerline, while a negative offset means it's inside. Car wheel hubs generally have a positive offset, and this value significantly affects the vehicle's driving stability and cornering traction.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.