How Long Can a Vehicle Go Without Inspection Before It Becomes Illegal?

1 Answers
ArcherRose
07/29/25 4:36pm
Vehicles are not allowed to skip inspections. Driving a vehicle without timely annual inspection will result in the temporary seizure of the vehicle and penalties. Below is relevant information about vehicle inspections: 1. Check whether the engine, chassis, body, and their attachments are clean, complete, and effective; whether the paint is uniform and aesthetically pleasing; whether major assemblies have been replaced; and whether they match the initial inspection records. 2. Verify whether the vehicle's braking performance, steering control, lights, exhaust, and other safety features comply with the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles." 3. Check whether the vehicle has been modified, remodeled, or altered; whether the driving license, license plate, and vehicle records match the current condition of the vehicle; and whether approval and modification procedures have been completed. 4. Inspect whether the license plate, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether they need replacement.
Was this review help?
1
0
Share
More Forum Discussions

What Does Two-Wheel Drive Mean?

Two-wheel drive refers to a system where two wheels are driven. A two-wheel drive vehicle uses either the rear wheels (or front wheels) as the driving wheels, while the front wheels (or rear wheels) serve as the driven wheels. The driving and driven wheels remain fixed, but the drive system can be switched depending on the specific driving conditions. There are two types of two-wheel drive vehicles: 1. Front-wheel drive (FWD) means the front wheels are the driving wheels. Under the same displacement conditions, the advantages include higher effective kinetic energy output, lower fuel consumption, stronger power, smaller size, larger interior space, lighter overall weight, compact structure, lower failure rate, and higher speed. FWD is commonly used in higher-priced small cars that require more space. 2. Rear-wheel drive (RWD) means the rear wheels are the driving wheels. Under the same displacement conditions, the advantages include better load-bearing capacity, simpler structure, easier maintenance, and better handling performance. RWD is typically used in large and medium-sized freight and passenger vehicles with larger volumes and greater cargo capacity.
5
4
Share

What is the reason for the fuel pump recall compensation for the xrv?

Regarding the reason for the fuel pump recall compensation for the xrv, the explanation is as follows: 1. The resin molding conditions during the manufacturing process of the fuel pump impeller were not optimal. Prolonged immersion of the impeller in fuel can cause swelling and deformation, leading to interference with the fuel pump housing. This results in poor fuel pump performance and inability to supply fuel to the engine properly. In extreme cases, the engine may stall while driving, posing a safety hazard. 2. There is an issue with the vehicle's power control unit. Under low-temperature conditions, the PCU may malfunction and stop supplying power to the 12V battery, causing the vehicle's dashboard warning lights to fail to illuminate. If the vehicle continues to be used, the drive motor may stop working in extreme cases, rendering the vehicle unable to operate normally and posing a safety hazard.
14
5
Share

Is the Mercedes-Benz E300L a B or C class car?

The Mercedes-Benz E300L is a C class car. The differences between B and C class cars: 1. Different wheelbases: B class wheelbase ranges between 2.7 meters to 3.0 meters; C class wheelbase ranges between 2.7 meters to 2.8 meters. 2. Different displacements: B class displacement ranges between 1.5 liters to 2.5 liters; C class displacement ranges between 2.5 liters to 3.2 liters. 3. Different models: B class cars are medium-sized sedans, represented by models such as Honda Accord, BMW 3 Series, Volkswagen Magotan, Buick New Regal, etc.; C class cars are high-end sedans, represented by models such as Audi A6L, BMW 5 Series, Mercedes-Benz E-Class, Toyota Crown, etc.
17
1
Share

How Many Kilometers Should a Cadillac Transmission Fluid Be Changed?

Cadillac transmission fluid should be changed every 65,000 kilometers. Below is an introduction to Cadillac: 1. Exterior: Features a very typical family-style design, with a shield grille paired with teardrop headlights introduced from the CT6, embodying a robust American style. 2. Interior: The interior focuses on horizontal design to enhance the sense of lateral visual space. The heavy and substantial style is a hallmark of American luxury, complemented by exquisite leather finishes and wood grain trim panels, with extensive use of genuine leather materials. 3. Notes: It is essential to use original manufacturer transmission fluid when changing, as some old fluid will remain in the transmission channels and torque converter during the change. Mixing different types of fluids inside the transmission may degrade the performance of the transmission fluid, leading to issues such as inadequate lubrication or abnormal operation of the transmission.
18
0
Share

What is the actual fuel consumption of the 9th-generation Accord 2.0?

The actual fuel consumption of the 9th-generation Accord 2.0 is 8.8 liters per 100 kilometers. The introduction of the 9th-generation Accord 2.0 is as follows: 1. Body dimensions: The length, width, and height are 4915*1845*1470mm, with a wheelbase of 2775mm. 2. Interior configuration: It features a three-spoke steering wheel design with soft genuine leather, and adds digital control technology buttons on the left side for controlling audio and Bluetooth functions, while the right-side buttons control low-speed cruise and trip computer functions. 3. Rear configuration: The full LED taillights are equipped with a preemptive ESS emergency braking warning system. When the speed exceeds 60km/h and the braking force exceeds 0.6g, the brake lights will flash to warn vehicles behind.
12
0
Share

What is the sequence of the three steps in defensive driving?

Defensive driving consists of three steps in the following order: the first step is observation, the second is prediction, and the third is action. Here is a detailed breakdown: 1. Observation: Drivers should adopt proper observation techniques to identify potential hazards on the road early. Observation should be thorough and far-reaching, avoiding distractions from irrelevant objects. 2. Prediction: After observing the road conditions, drivers must accurately analyze and predict potential risks that could affect driving safety, without relying on luck. 3. Action: Once risks are predicted, appropriate actions should be taken to mitigate them in advance.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.