···
Log in / Register

How Long Can a Run-Flat Tire Continue to Run After Losing Pressure?

4 Answers
VanNevaeh
08/27/25 6:49am

Run-flat tires can continue to drive for 50 to 250 kilometers at a speed of 80 km/h even when the tire pressure is completely lost, without the need for immediate replacement. The differences between run-flat tires and regular tires are: 1. Different materials: Run-flat tires have an additional thick layer of natural rubber on the sidewall that provides reinforcement and utilizes nano-renewable technology; regular tires are constructed from natural rubber and renewable energy rubber, among other materials. 2. Different wear resistance: When a tire experiences a blowout, run-flat tires can continue to drive normally for a certain distance; regular tires cannot function properly after losing pressure. Run-flat tires are also known as pressure-retaining tires and are marked with RSC on the sidewall. Structurally, run-flat tires do not differ significantly from regular tires, except for the reinforced design on the tire sidewall, which allows the tire to continue supporting the vehicle in the event of a leak or sudden loss of pressure.

Was this review help?
5
2
Share
DeAngelo
09/09/25 5:38am

How long can a run-flat tire last after a puncture? I've personally experienced this. Last time, my car had a flat tire on the highway, but thanks to the run-flat tires it came with, I managed to drive nearly 80 kilometers to the repair shop. The ride felt a bit bumpy, but I had to control the speed carefully—not exceeding 80 km/h, as going faster would cause more wear. The run-flat distance varies significantly depending on the tire brand, usually ranging between 50 to 100 kilometers, so check the manual for specifics. I recommend car owners familiarize themselves with their tire type and check the tire pressure regularly. Remember, run-flat capability is only a temporary fix, not a permanent solution. Safety first—slow down immediately if you have a flat, find a safe place to repair it, and don’t risk driving too far just to save time.

Was this review help?
20
2
Share
Expand All
VanJoel
10/23/25 6:29am

As an auto mechanic, I've seen too many car owners misuse run-flat tires. Theoretically, they can run about 50 to 80 kilometers after a puncture, but it depends on the vehicle weight and road conditions; high speed or full load will significantly reduce this distance, and in severe cases, the wheel rim may even deform. I must emphasize that this is not a cure-all - the run-flat feature is only for emergencies, and you must immediately find a professional shop to replace or repair the tire, not continue long-distance driving. Tire lifespan is affected, and driving too long after a puncture will increase repair costs. Regularly check tire pressure and wear during maintenance - developing good habits can prevent trouble. Once, a customer stubbornly drove 100 kilometers, resulting in complete tire failure and costing over a thousand yuan extra - really not worth it.

Was this review help?
13
5
Share
Expand All
Mateo
12/06/25 6:53am

I'm particularly concerned about my child's safety in the car. The run-flat capability after a tire blowout is a safety feature, generally supporting around 50 kilometers of travel. However, the premise is to slow down and drive steadily to a safe area. As a parent, I teach my family not to panic when encountering this situation and to handle it promptly as instructed. Remember, this isn't always feasible; slippery roads or sharp turns can increase the risk. Regular tire maintenance is crucial, such as checking tire pressure monthly, which can reduce the chance of a blowout. From a safety perspective, the run-flat feature is just for emergencies; don't always rely on it.

Was this review help?
20
5
Share
Expand All
More Forum Discussions

What to Do If You Keep Mistaking the Accelerator for the Brake?

When not pressing the accelerator, keep your foot on the brake to develop good driving habits. Here are some tips to avoid mistaking the accelerator for the brake: Place your right foot on the brake when not pressing the accelerator: While driving, make it a habit to place your right foot on the brake when you're not pressing the accelerator. This helps prevent confusing the accelerator with the brake. If you rest your right foot on the floor when not accelerating, it may feel more relaxed, but in an emergency, you might struggle to locate or accurately press the brake, leading to mistakenly pressing the accelerator instead. Develop good driving habits: For novice drivers, the main reason for mistaking the accelerator for the brake is insufficient familiarity with the vehicle or the lack of established good driving habits. Staying calm in unexpected situations is also crucial for safe driving.
15
0
Share

Which Gear is the Driving Gear in an Automatic Transmission Car?

In an automatic transmission car, the driving gear is the D (Drive) gear. The following is an introduction to the gears in an automatic transmission car: P Gear: Parking gear. When the vehicle is completely stationary, press the unlock button at the front of the gear lever to shift into P gear. R Gear: Reverse gear. When the vehicle is completely stationary, press the brake pedal and the unlock button at the front of the gear lever to shift into R gear. After releasing the brake pedal, slowly press the accelerator to move the vehicle backward. N Gear: Neutral gear. You can directly shift from R or D gear into N gear. When shifting out of N gear, you need to press the brake pedal. D Gear: Drive gear. You can directly shift from N gear into D gear. This gear is generally used when the vehicle is moving forward, and the system will automatically shift gears based on engine load and speed. S Gear: The S gear in an automatic transmission stands for Sport gear, which is a mode that emphasizes power output. Due to its strong power, the S gear is usually used when overtaking or climbing a slope. After completing the action, it is switched back to the more economical D gear. In terms of fuel consumption, the S gear mode consumes more fuel than the normal mode because of the increased fuel injection at high RPMs.
5
1
Share

Why is the Pajero called the Mountain Cat?

Pajero is called the Mountain Cat for the following reasons: English Name: The English name of Pajero is derived from 'Pajero', which originally refers to the Pampas cat, primarily found in South America, also known as the South American grassland cat. It inhabits areas ranging from 100 to 5000 meters above sea level and is a relatively fierce animal. Because this cat lives in mountainous regions year-round and has strong adaptability, locals commonly refer to it as the 'Mountain Cat'. Brand Image: The Pajero has consistently achieved victories in off-road rallies, aligning well with the image of the Pampas cat, which thrives in adversity. Over time, the Pajero came to be known as the 'Mountain Cat'.
13
4
Share

Are Green License Plate Vehicles Subject to Traffic Restrictions?

Local traffic restriction policies determine whether green license plate vehicles are subject to traffic restrictions. Green license plates are exclusive to new energy vehicles, specially designed by the state for differentiated management to quickly distinguish between traditional fuel vehicles and new energy vehicles. Currently, the format of green new energy vehicle license plates is: regional abbreviation + area code letter + exclusive letter for pure electric/hybrid + numbers. Green license plates refer to new energy vehicles, embodying the characteristics of green environmental protection, and can effectively and conveniently identify new energy vehicles. License plates, also known as vehicle registration plates, are standardized hard number plates with a unified format and style as stipulated by national vehicle management regulations. They are issued by vehicle management authorities after reviewing, inspecting, and registering the vehicles applying for the plates, featuring a unique registration code and are mounted on the front and rear of the vehicle. The conditions, procedures, and requirements for applying for new energy vehicle license plates are the same as those for regular vehicle license plates. However, only three types of vehicles—pure electric vehicles, plug-in hybrid electric vehicles, and fuel cell vehicles—are eligible for green license plates.
13
5
Share

Where is the airbag plug under the seat?

The airbag plug under the seat is generally located in front of or below the gear shift lever. Places marked with AIR, BGA, etc., are where the airbag is configured. If you really can't find it, you can refer to the car's user manual, which will have detailed records. The airbag plug is mostly located under the airbag, which is basically where the word "airbag" is written inside the car. Most airbag plugs are yellow. The airbag has a separate computer board, and all airbags are basically connected to the airbag computer board. Driver's airbag: There are two bolts under the rear cover of the steering wheel. Remove the bolts, gently lift it, and take off the connector that connects the clock spring to the generator. Generally, the connector has a lock. Some can be removed by pressing it, while others can be removed by pulling out the small pin. Passenger airbag: There are two types: split type and integrated type. The split type has a separate airbag cover with a gap between it and the dashboard, marked with SRS or airbag or a combination of the two. The integrated type has the airbag cover and dashboard as one piece, also marked with those words. The split type is easier to disassemble than the integrated type. Side airbag: After removing the A-pillar trim, the side curtain airbag appears. In a typical side collision, the side curtain airbag will quickly close the actual gap between the occupants and the door and B-pillar. Its function is to protect the side parts of the occupants (mainly the head). The side airbag must deploy at an extremely fast speed in the small gap between the occupants and the door to act as a buffer.
12
4
Share

Why Can't I Connect to CarPlay?

Reasons for not being able to connect to CarPlay: Damaged phone data cable: Check if the phone data cable is damaged or broken, and whether there are any foreign objects attached to the metal contact terminals on the USB plug and phone plug, or if the surface is oxidized. Internal port damage: Inspect the internal USB female port of the car stereo's external USB HUB for any damage, and whether the contact metal pieces can maintain good contact with the USB male plug. Loose connection: Check if the connection between the car stereo and the external USB HUB is loose. To avoid poor internal contact due to prolonged oxidation, you can repeatedly unplug and replug the two connectors of the cable.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.