How Long Can a Ford Vehicle Drive After the Engine Displays an Oil Change Alert?

What does it mean to check the exhaust system?

Checking the exhaust system refers to a malfunction in the emission system, which may be caused by a dirty catalytic converter or oxygen sensor triggering an alarm signal. It could also be due to poor gas combustion leading to a system alert. If such an alert appears, it is best to visit a 4S shop for inspection and troubleshooting. Additional Information: 1. Composition of the Exhaust Pipe: A car's exhaust pipe consists of three sections: the header, mid-pipe, and tailpipe. The catalytic converter is located in the header, which is also known as the exhaust manifold. In most cars, the exhaust manifold can be seen by opening the engine hood. Over time, the catalytic converter may fail, and if it does, it could cause the engine warning light to illuminate. 2. Function of the Oxygen Sensor: Most cars have two oxygen sensors: one located behind the exhaust manifold and another behind the catalytic converter. The oxygen sensor detects the oxygen content in the exhaust gases and sends this information back to the ECU.

15

0

Share

Which manufacturer produces Baojun?

Baojun is produced by the SAIC-GM-Wuling Baojun production base. More details about Baojun are as follows: 1. Baojun's body dimensions: length 4620mm, width 1710mm, height 1535mm, wheelbase 2750mm. 2. Baojun's advantages: The 2020 Baojun is equipped with a 1.5L naturally aspirated engine and a 5-speed mechanical automatic transmission, with a maximum power of 77 kW and a maximum torque of 135 Nm. Its drive mode is front-wheel drive. 3. Baojun's design: the front suspension uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension.

15

5

Share

Can you change lanes on a single white line?

You cannot change lanes on a single white line. As long as it is a solid line, lane changing is not allowed. The purpose of a white solid line is to separate lanes in the same direction, usually marked before traffic lights at intersections. Below is more information about various lines on the road: 1. Yellow line: Yellow lines are used to divide opposing lanes. A solid yellow line prohibits crossing the line; a yellow dashed line allows turning or making a U-turn when there is no oncoming traffic. 2. White line: A solid white line indicates lanes in the same direction, and you cannot cross into another lane in the same direction; a white dashed line allows crossing into another lane in the same direction.

19

2

Share

How to Check the Wear Level of Brake Pads?

Check the wear level of brake pads as follows: 1. Check the thickness of the friction material: Brake pads consist of two parts: a metal base plate and a friction material. When braking, the friction material contacts the brake disc to generate friction, which provides the braking effect. The thickness of the friction material is usually 10 millimeters. When it wears down to 5 millimeters, it indicates severe wear, and the brake pads need to be replaced. 2. Listen for unusual noises during braking: Some brake pads have a hidden metal pin inside the friction material. When the friction material wears down to a certain level, the metal pin contacts the brake disc, producing a sharp, unusual noise during braking, alerting the driver to replace the brake pads. 3. Inspect the thickness of the brake pads: Remove the tire to clearly see the condition of the brake pads. Brake pads gradually wear down during use and must be replaced when they reach the wear limit.

19

0

Share

Why is the right side always too wide when reversing into the right parking space?

If the right side is too wide when reversing into the right parking space, it is actually caused by turning the steering wheel too late. Below is relevant information about reversing into the right parking space: 1. Turning the steering wheel too late when reversing into the right parking space: If the rear of the car is still far from the corner of the parking space (not yet around 30 cm) when the right front door handle has already reached the extension line of the right boundary of the parking space or even further left, it means the steering wheel was turned too late, making it easy to hit the left corner or boundary of the parking space. 2. The right side is too wide when reversing into the right parking space: (1) After most of the car body has entered the parking space, if the rearview mirror shows that the left side is narrow and the right side is wide, you can turn the steering wheel 1/4 turn to the right at this time, and straighten the steering wheel when the car body is aligned. (2) The car body is parallel to the parking space, but the entire car body is biased to the left. If no adjustment is made, it is very easy to hit the left front corner of the parking space when exiting to the left. Therefore, you can first turn the steering wheel 1/4 turn to the right, observe that the front wheels do not easily cross the line, and when the distance on the right side is about right, turn the steering wheel 1/4 turn to the left. When the car body is parallel to the parking space again, straighten the steering wheel.

20

0

Share

What is the normal position of the water temperature gauge for the Baojun 510?

The normal operating temperature for the Baojun 510's engine is between 80°C and 90°C. The car's water temperature gauge typically displays two letters, 'C' and 'H,' or uses white and red zones to indicate temperature. 'C' stands for cold, and 'H' stands for hot. If the water temperature gauge approaches the 'H' or the red danger zone, and in severe cases, the water temperature warning light comes on, it indicates that the engine coolant temperature is too high. Below are the reasons that can cause a car's water temperature to rise excessively: 1. Insufficient coolant: Coolant leaks or low coolant levels can cause the engine's water temperature to rise. Check the coolant level and add more if necessary. Recheck the level after a few days to see if it has dropped significantly. If it has, locate the source of the leak. 2. Faulty cooling fan: When the vehicle is running at high RPMs, the heat generated may not be transferred to the coolant efficiently, affecting cooling and causing the coolant temperature to rise, leading to overheating. 3. Faulty water pump: Issues with the water pump can include seized bearings or damaged impellers. Common impeller problems include cracks or detachment from the pump shaft, which slows down the coolant circulation and can lead to engine overheating.

19

4

Share

How Long Can a Ford Vehicle Drive After the Engine Displays an Oil Change Alert?

What does it mean to check the exhaust system?

Which manufacturer produces Baojun?

Can you change lanes on a single white line?

How to Check the Wear Level of Brake Pads?

Why is the right side always too wide when reversing into the right parking space?

What is the normal position of the water temperature gauge for the Baojun 510?

How long in advance should I renew my driver's license before it expires?

Can I renew my driver's license in a different location?

Do Run-Flat Tires Have Inner Tubes?

Can a Car That Normally Uses 95 Octane Gasoline Use 92 Octane?