How Long Can a Flooded Car Be Driven Before Problems Arise?

What does the hold button in a car mean?

Hold in a car refers to the auto hold function, which is used to control the auto hold switch. Its purpose is to adjust the car to the most efficient driving state based on different road conditions. If driving on extremely poor road conditions, this button can effectively prevent the transmission from frequently shifting gears. Additionally, during overtaking, it can also serve the function of forced downshifting. Here are some related details: 1. If you need it to work, simply press the hold button while in D gear, and the car's transmission will maintain the second, third, or fourth gear. Pressing the hold button in third gear will keep the car in second or third gear. 2. Pressing the hold button in second gear will keep the car in second gear, and pressing it in first gear will naturally keep it fixed in first gear. Using this button will not cause any harm to the transmission.

6

1

Share

What is the lifespan of the Outlander CVT transmission?

The lifespan of the Outlander CVT transmission is between 300,000 to 400,000 kilometers. Here is some relevant information on the correct usage and maintenance of the CVT transmission: 1. Manual: After purchasing a new car, it is essential to carefully read the user manual. 2. Accelerating and braking: Avoid sudden acceleration and hard braking, as this can increase engine wear. 3. Uphill and downhill: When driving on long or steep slopes, use manual mode or low gear. 4. Neutral gear: Coasting in neutral is not recommended, as it may even cause immediate damage to components. 5. Emergency braking: During emergency braking, do not shift directly into P gear; instead, shift to N gear and engage the handbrake. 6. Hill starts: When starting on a slope, use the brake assist to reduce the load on the steel belt and extend its lifespan.

13

2

Share

What are the differences between China National V and China National VI vehicle emission standards?

Adopting the principle of fuel neutrality, meaning the emission limits remain the same regardless of the fuel type used. Below is more information about the emission standards: 1. Brief description: China National V and National VI emission standards are the abbreviations for the fifth and sixth stages of national vehicle pollutant emission standards respectively. These standards require vehicle emissions to meet specified limits for gaseous pollutants. The China National VI standard is an upgraded version of the current National V standard, divided into two phases: National VI a and National VI b, implemented progressively. Compared to National V, National VI imposes stricter requirements on vehicle tailpipe emissions of pollutants such as carbon monoxide and hydrocarbons, resulting in more environmentally friendly emissions. 2. Advantages of National VI: Causes less environmental pollution, produces more eco-friendly emissions, protects the ecological environment, and safeguards human health.

10

2

Share

Is it necessary to repair a slightly deformed wheel hub?

A slightly deformed wheel hub needs to be repaired for the following reasons: 1. The wheel hub is a cylindrical metal component that supports the tire from the inside and is mounted on the axle. 2. Its main function is to affect the size of the brake specifications and the selection of tire specifications. The methods for correcting a deformed wheel hub are as follows: 1. Deformation location detection: First, locate the deformed area of the wheel hub, mount the hub on a custom fixture, and use a dial indicator to find and calibrate the deformed position. 2. Heating: Use a blowtorch to locally heat the deformed area. The small red dots on the wheel hub are infrared thermometers; stop heating once a certain temperature is reached. 3. Correction: Once the hub softens at the appropriate temperature, use a small hydraulic jack for repeated slight corrections. Finally, ensure it meets reasonable standards.

19

5

Share

How to Deal with Low Tire Pressure?

If the tire pressure is too low to drive, you can use an onboard air pump to inflate the tires or replace them with a spare tire, then proceed to the nearest repair shop for inspection. Hazards of Low Tire Pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and potential deviation, posing risks to driving safety; Increases movement in various parts of the tire, causing abnormal heating due to excessive compression; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts; Increases tire body deformation, making the tire side prone to cracks, generating flexing movements that cause excessive heat, accelerating rubber aging, fatigue in the cord fabric layer, and cord breakage. It also enlarges the tire's contact area with the ground, speeding up shoulder wear.

13

0

Share

How many times a year does a 15-year-old car need to be inspected?

15-year-old cars and above require two inspections per year. Here is the relevant information: 1. Cross-regional entrusted annual inspection: The procedure for cross-regional entrusted annual inspection requires the owner to first apply to the original registration location before the annual inspection can be conducted, and an application must be submitted to the original registration location's vehicle management office every year. 2. Legal provisions: According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law": Motor vehicles shall undergo safety technical inspections according to the following periods from the date of registration: (1) Passenger vehicles for commercial use shall be inspected once a year within 5 years; after 5 years, once every 6 months. (2) Trucks and large and medium-sized non-commercial passenger vehicles shall be inspected once a year within 10 years; after 10 years, once every 6 months. (3) Small and mini non-commercial passenger vehicles shall be inspected once every 2 years within 6 years; after 6 years, once a year; after 15 years, once every 6 months.

6

4

Share

How Long Can a Flooded Car Be Driven Before Problems Arise?

What does the hold button in a car mean?

What is the lifespan of the Outlander CVT transmission?

What are the differences between China National V and China National VI vehicle emission standards?

Is it necessary to repair a slightly deformed wheel hub?

How to Deal with Low Tire Pressure?

How many times a year does a 15-year-old car need to be inspected?

How to Deal with Engine Overheating?

Where is the VIN located on the Jianghuai Refine?

Where to Find the Vehicle Make and Model?

Why does the brake feel harder than before?