How Long Can a Changan Engine Last?

2 Answers
VonIsabelle
07/23/25 8:05pm
Changan engines can last for 10 years. As an independently developed engine brand, Changan engines feature high power, high torque, and low emissions. Taking the 2021 Changan CS75 Manual Elite model as an example, its dimensions are 4650mm in length, 1850mm in width, and 1715mm in height, with a wheelbase of 2700mm and a fuel tank capacity of 58 liters. The 2021 Changan CS75 Manual Elite is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 178 PS, a maximum power of 131 kW, and a maximum torque of 265 Nm, paired with a 6-speed manual transmission.
Was this review help?
18
5
Share
DeAshlyn
08/10/25 6:10pm
I've been driving my Changan car for five years, and the engine has run 150,000 kilometers with great stability. The lifespan really depends on daily maintenance; I stick to changing the oil and filters every 5,000 kilometers to prevent engine overheating or carbon buildup. Driving habits also play a key role; avoiding sudden acceleration and minimizing heavy loads when climbing hills reduces wear. Preheating for a few minutes in winter protects the parts. With proper maintenance, exceeding 200,000 kilometers isn't a problem. A friend's car lasted 300,000 kilometers, all thanks to regular check-ups. Overall, there's no fixed answer to how long an engine can last, but good care can extend its life, saving both money and hassle.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

How to deal with peeling car clear coat?

Steps to repair peeling car paint: 1. Clean the car paint surface and ensure it is completely dry; 2. Remove the peeling part of the paint; 3. Simply repaint using the required painting method and materials. After the car has just been painted, it is best not to wash it for at least 24 hours, preferably 48 hours, because the newly applied paint has not fully adhered during this time. Washing the car within this period can definitely damage the clear coat on the paint surface, thereby reducing the paint's adhesion. Peeling car paint is caused by an improper ratio of clear coat to hardener during the painting process, which prevents the clear coat from adhering well.
11
0
Share

What to Do When the Oil Drain Plug is Stripped?

Place something on the screwdriver tip to increase friction. Inject 502 glue into the screw hole, wait for it to solidify, then use needle-nose pliers to unscrew the bolt. Avoid using a screwdriver to prevent further stripping. Heat the screwdriver tip until red-hot and quickly press it against the screw head.
13
0
Share

What are the causes of a faulty front oxygen sensor?

The causes of a faulty front oxygen sensor: 1. Oxygen sensor poisoning; 2. Poor engine combustion leading to carbon deposits on the oxygen sensor surface; 3. Ceramic breakage in the oxygen sensor; 4. Burnout of the heater resistance wire—for heated oxygen sensors, if the heater resistance wire is burned out, it becomes difficult for the sensor to reach normal operating temperature and thus loses functionality; 5. Internal wiring disconnection in the oxygen sensor. The oxygen sensor is a standard component in automobiles, using ceramic sensing elements to measure the oxygen potential in the exhaust pipe. Based on chemical equilibrium principles, it calculates the corresponding oxygen concentration to monitor and control the air-fuel ratio of combustion, ensuring product quality and compliance with exhaust emission standards.
10
1
Share

What to do when the battery of Magotan B8 has no power?

First, unlock the ignition switch mechanism, take out the mechanical key, and insert it into the mechanical lock hole to open. Then, open the front hood using a wrench. Open the engine compartment cover, locate the vehicle's battery, first identify the positive and negative terminals of the battery, and take out the jumper cables. The connection sequence is to connect the red cable to the positive terminal of the vehicle first, and then connect the black cable to the negative terminal of the vehicle.
5
2
Share

What are the penalties for vehicle color change with film?

If the color change with film is not registered and is discovered, a fine will be imposed without any deduction of points. According to Article 79 of the "Regulations on the Registration of Motor Vehicles," if the body color is changed without completing the required modification registration, the traffic management department of the public security organ will issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color. To apply for a change in the body color of a motor vehicle, the following documents must be submitted in accordance with the "Road Traffic Safety Law": "Application Form for Modification of Motor Vehicle Registration." Original and photocopy of the identity proof of the vehicle owner and agent. Original motor vehicle registration certificate. Original motor vehicle driving license. Payment of all fines before the color change. According to Article 6, Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, it does not require modification registration. Conversely, if it exceeds 30%, it must be filed and registered within 10 days after the color change. Precautions for vehicle color change: Before changing the color of a motor vehicle, it is necessary to consult the vehicle management office where the vehicle is registered to confirm whether the region allows the use of film to change the vehicle color. If the region does not support this method, the modification cannot be registered, and the film must be completely removed to restore the vehicle's original color. Additionally, according to the "Regulations on the Registration of Motor Vehicles," owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply for modification registration with the vehicle management office. According to Article 10, registered motor vehicles must apply for modification registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change from commercial to non-commercial use or vice versa. The owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and signal lights as required. Other motor vehicles are prohibited from painting, installing, or using patterns, alarms, or signal lights that are specific to or resemble those of the aforementioned vehicles.
13
5
Share

How to Connect a Yamaha Igniter with 6 Wires?

Connect the green extinguishing wire of the igniter to the negative wire of the engine. Then connect the power wire to the red power wire on the engine. Next, connect the blue-white wire and the blue-yellow wire to the trigger coil. Then connect the output wire of the igniter to the output wire of the engine. Finally, connect the black extinguishing wire to the engine's extinguishing wire.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.