How Long Can a Car Stay in a Highway Service Area?

1 Answers
LeGrace
07/29/25 5:57am
Cars can stay in a highway service area for 3 to 5 hours. If the duration exceeds this limit, overtime fees will be charged. Impact of Excessive Stay: If a vehicle remains in the highway network for more than 24 hours or on the same highway route for over 12 hours, overtime fees will apply. Therefore, it's essential to manage the time spent in the service area. If you stay for accommodation, vehicle repairs, etc., you can request an invoice as proof of delay when exiting the highway, which can help avoid overtime charges. Highway Service Area Precautions: Drivers should slow down in advance when entering a service area. Unlike the highway, where the speed limit can be up to 120 km/h, service areas have a speed limit of only 40 km/h. Many drivers overlook this, leading to sudden braking, which compromises ride comfort and may even cause traffic accidents. Hence, upon seeing the service area sign, it's crucial to reduce speed beforehand.
Was this review help?
14
1
Share
More Forum Discussions

Can 95 and 92 gasoline be mixed?

95 and 92 gasoline cannot be mixed. The following are the characteristics of gasoline: 1. Volatility: In the engine cylinder, it quickly vaporizes and forms a uniform combustible mixture with air; 2. Stability: The ability to resist oxidation under normal temperature and liquid phase conditions is called stability; 3. Anti-knock: Refers to the ability of gasoline to resist detonation combustion under various usage conditions; 4. Corrosiveness: Sulfur compounds in gasoline can cause corrosion to objects. Additional information: The reason why different grades of gasoline cannot be mixed is that it affects the normal operation of the engine, causing car noise, weak driving, and engine damage. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum and can be used as fuel.
4
2
Share

How to Replace the Small Oil Window on the Brake Master Cylinder?

After removing the top cover and sealing gasket, use a syringe to extract the brake fluid from the oil reservoir, then cover the inside of the reservoir with plastic film. Use a flat-head screwdriver (or an 8mm steel rod) to tap out the old window and remove the old O-ring. Clean the mounting hole thoroughly, insert the new O-ring, and press in (requires a pressing tool) or tap in the new window (interference fit installation, which is quite tight). Remove the plastic film, refill with brake fluid, and reinstall the sealing gasket and top cover.
1
5
Share

How to Start the Engine with One-Button Start in Winter?

Here are the steps for starting the engine with one-button start in winter: 1. The driver sits in the cockpit and presses the start button for the car to perform a self-check; 2. Press the brake pedal and then press the one-button start button to ignite the engine; 3. Press the foot brake, shift to D gear, and release the handbrake to start moving. The functions of one-button start include: 1. Multiple start modes; smart card backup key; 2. Stable and reliable performance; intelligent silent car wash mode; 3. Smart entry via sensing; dual-mode free switching for smart keys. Additional information: The one-button start device is part of a smart car, serving as a button device to simplify the starting process, and it can also be used to turn off the engine.
14
3
Share

What are the impacts of a faulty brake light switch in a car?

Here are the impacts of a faulty brake light switch in a car: 1. The brake light remains constantly illuminated; 2. Cruise control fails to function properly; 3. The battery may drain after parking; 4. For automatic transmission vehicles, the brake indicator light does not illuminate and no sound is heard when pressing the brake; 5. Cruise control often fails to shift gears automatically when activated. The method for replacing the brake light is as follows: 1. Use a Phillips screwdriver or socket to remove the bolts; 2. Pull the light assembly out from the rear pillar; 3. Rotate the socket counterclockwise and remove it; 4. Remove the old bulb and insert the new one. Additional information: The brake light is installed at the rear of the vehicle, with a red main body color. Its purpose is to enhance the penetration of the light source, allowing vehicles behind to detect the vehicle ahead in low visibility conditions, thereby preventing rear-end collisions.
11
2
Share

What is the difference between compact cars and subcompact cars?

Subcompact cars differ from compact cars in terms of body size, wheelbase, and generally have weaker power output compared to compact cars. Here are the key differences: 1. Most compact cars have a wheelbase ranging between 2500mm to 2750mm, with body lengths typically between 4100mm to 4700mm. Subcompact cars usually feature a wheelbase of 2350mm to 2600mm and lengths between 3650mm to 4450mm. 2. Common compact car models include the Volkswagen Golf, Volkswagen Lamando, Volkswagen Sagitar, Volkswagen Jetta, Volkswagen Santana, Audi A3, and BMW 1 Series. 3. Subcompact cars offer less interior and trunk space than compact cars, but they are generally more affordable in price.
5
0
Share

How to Brake Smoothly?

Here are the methods to achieve smooth braking: 1. Press the brake pedal gently when decelerating; 2. Pay attention not to follow too closely and develop the habit of braking in advance; 3. On long downhill sections, you can shift the car into a low gear to use the engine's resistance to slow down the vehicle; 4. Before entering a curve, brake and decelerate in advance, then coast into the curve and accelerate out of it; 5. On rainy days or gravel roads, use intermittent braking to improve driving safety. Extended Information: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, and other transportation tools or machinery.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.