How long before a motor vehicle is mandatorily scrapped?

1 Answers
SanOscar
07/29/25 9:06pm
Motor vehicles that have not undergone inspection for three years will be mandatorily scrapped. Vehicle scrapping process: The owner of a vehicle applying for scrapping and renewal must fill out and submit the "Application Form for Motor Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" in duplicate, with the owner's seal affixed. Apply at the registration and acceptance counter. For vehicles that have reached the scrapping age limit, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age limit but are deemed to meet the scrapping standards after inspection by the motor vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Modification Form", "XX Province Updated Vehicle Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed after approval according to regulations.
Was this review help?
7
2
Share
More Forum Discussions

How long after window tinting can I roll down the windows?

After applying window tint film to your car, it is recommended to wait 7 days before rolling down the windows. Additional information about car window tinting is as follows: 1. It takes some time for the tint film to firmly adhere to the window. During this period, opening and closing the windows can cause the edges of the newly applied film to peel or the film to shift if it hasn't fully bonded. 2. You can clean the tinted windows 2-3 weeks after application. Use a soft, lint-free cloth dampened with mild detergent to wipe the film, being careful not to introduce sand or sharp particles that could scratch the film's surface. Avoid using ammonia-based cleaners. 3. If there is a cloudy or foggy appearance between the film and the glass after application, it will naturally dry and disappear within 2-3 weeks.
18
3
Share

What are the hidden functions of the Elantra remote key?

The hidden function of the Elantra remote key is that long-pressing the lock button will automatically raise the windows, a feature typically found in many high-end or even top-tier models. For some models with a sunroof, long-pressing the lock button can also close the sunroof. More information about the Elantra remote key is as follows: 1. The functions of the Elantra remote key include unlocking, locking, and trunk unlocking. When the key's battery is low or the signal is obstructed by other vehicles or objects, there may be some interference in places like airports and radio stations. 2. When using the remote key, avoid operating it from a long distance, as this will increase battery consumption. The battery life of the remote key is generally 2 to 3 years. When the battery is low, occasional malfunctions may occur during close-range remote operation.
11
5
Share

Do cars still have water tanks now?

Currently, cars do have water tanks, which refer to radiators. More information about radiators is as follows: 1. The radiator is part of the car's cooling system. In the engine's water cooling system, the radiator consists of three parts: the inlet chamber, the outlet chamber, the main plate, and the radiator core. 2. Radiators can be installed in three ways: same-side inlet and outlet, opposite-side inlet and outlet, and bottom inlet and outlet. Regardless of the method, the number of pipes should be minimized, as more pipes not only increase costs but also potential risks. 3. The hoses of the engine radiator can age over prolonged use and are prone to cracking, allowing water to easily enter the radiator. If a hose ruptures while driving, the high-temperature water sprayed out can form large clouds of steam escaping from under the engine hood. When this happens, immediately choose a safe place to stop the car and then take emergency measures to address the issue.
12
5
Share

How to Maintain a Manual Transmission?

Manual transmission maintenance methods are as follows: 1. If mineral-based gear oil is used in the transmission, the transmission fluid should be replaced every 3 years or 60,000 kilometers; if synthetic oil is used, regularly inspect the transmission fluid - it can continue to be used as long as the oil quality remains good. 2. During normal operation, transmission fluid operates at around 120°C, placing high demands on the fluid quality which must also be kept clean. However, special circumstances may arise during use, necessitating timely inspection and repair. 3. Transmission cleaning should be performed at professional repair shops using specialized transmission cleaning equipment to ensure optimal fluid replacement while the transmission is operating.
5
3
Share

What to Do When the Mercedes-Benz Hold Function Doesn't Engage?

Mercedes-Benz hold function not engaging is generally due to improper foot technique or lack of familiarity. Once you master the correct operation, practice more to get used to it. The correct operation method is: after stopping the car, quickly press the brake pedal once more. If the hold function doesn't engage, release the brake slightly and press it again. In simple terms, after the vehicle comes to a complete stop, quickly press the brake pedal once more. The brake doesn't need to be pressed deeply, but it must be done quickly. More information about Mercedes-Benz is as follows: 1. Mercedes-Benz is a German luxury car brand and one of the world's most successful premium car brands. 2. Its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models are highly praised.
6
3
Share

How to Turn Off the Rear Window Wiper?

Steps to turn off the rear window wiper: 1. With the ignition on but the engine off; 2. Turn the wiper on once; 3. Immediately turn it off; 4. The wiper will return to its original position. The wiper is a tool on the front windshield of motor vehicles designed to simply clear rainwater and other debris to maintain visibility. Wipers are crucial for driving safety, especially during rainy seasons. It is important to regularly inspect and maintain the wipers to prevent obscured vision due to aging wiper blades, which could lead to traffic accidents. Adjusting the wiper switch forward or backward switches between the front and rear wipers, while adjusting it up or down changes the wiper speed. Pulling the wiper stalk one notch toward the driver adjusts the front windshield wiper, and pulling it another notch activates the front windshield washer function. Pushing the stalk one notch toward the front of the vehicle adjusts the rear window wiper.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.