How Long and Wide is the Tiguan L's Folded Down Trunk?

1 Answers
VonLucy
07/30/25 10:07am
Tiguan L trunk dimensions: height ranges from 710mm to 820mm, minimum width is 1000mm, maximum width is 1400mm, maximum depth is 1940mm, and regular depth is 910mm. When the rear seats are folded down, the trunk becomes very flat. The Tiguan's trunk is quite spacious, and the seats support a 4/2/4 split folding. Below is an introduction to the Tiguan L: 1. The Tiguan L's length, width, and height are 4712*1839*1673mm, with a wheelbase of 2791mm. 2. The vehicle is equipped with a 1.4T engine and a 2.0T engine. 3. The front face adopts Volkswagen's latest family design, with thick chrome trim connecting to the headlights, giving it a strong sense of power. The headlight clusters are all xenon headlights. 4. It features one-key start, auto hold, electronic parking brake, body stability system, panoramic sunroof, automatic parking, and other driving assistance functions. Additionally, there are four driving modes to choose from: highway, snow, off-road, and personalized.
Was this review help?
9
5
Share
More Forum Discussions

How to Use the Sport Mode in a Car?

To use the sport mode in a car: 1. While the vehicle is moving, shift the gear lever directly from D to S without pressing the brake; 2. After shifting, press the accelerator pedal all the way down. The functions of the sport mode include: 1. Maintaining sufficient torque for the vehicle to enhance power performance; 2. The suspension becomes stiffer with increased support, the throttle sensitivity is enhanced, and the engine intake increases; 3. High engine speed can also help remove carbon deposits from the engine. The sport mode is used during overtaking and when going up or down slopes. It increases the engine speed for quick acceleration, boosting the engine's power output in a short time to achieve instant acceleration.
11
4
Share

What are the aftereffects of replacing the front windshield?

The aftereffects of replacing the front windshield are: 1. The adhesive may not bond tightly with the glass; 2. Wind may enter through gaps between the windshield and car body, increasing interior noise; 3. When driving on bumpy roads, you may hear rattling/impact sounds from the front. The windshield replacement procedure is: 1. Remove black protective trim around windshield with screwdriver; 2. Use steel wire to separate sealant around entire windshield; 3. Scrape off residual black sealant with blade; 4. Apply polyurethane sealant to windshield frame; 5. Install new windshield.
10
3
Share

How to Register a Car Color Change?

Car color change registration steps are: 1. Make an appointment with the vehicle management office in advance for the application time, then drive to the vehicle management office during the agreed time slot; 2. Pay all fines before the vehicle color change, bring the original and copy of the vehicle owner's ID card, the original vehicle registration certificate, the original vehicle license, and collect the vehicle change registration application form at the guidance desk; 3. If the application meets the regulations, the applicant can receive a notice of approval for the change and proceed with the color change; 4. After the color change, the vehicle owner must bring the required documents and invoice, drive the color-changed car back to the vehicle management office to complete the inspection procedures. The staff will record the new body color, take new photos, and complete the change registration process.
16
3
Share

What is the service life of air suspension?

The service life of air suspension is approximately 5 years. The principle of air suspension is: using an air compressor to form compressed air, and adjusting the ground clearance of the vehicle through the compressed air. Types of vehicle suspension include: double wishbone, single wishbone, trailing arm, single oblique arm, and multi-link. Their function is to transmit forces and torques between the wheels and the frame, cushion the impact from uneven road surfaces to the frame or body, dampen the resulting vibrations, and ensure smooth driving of the vehicle. Methods to determine damage to vehicle suspension include: 1. The steering wheel becomes heavy and vibrates; 2. The shock absorber leaks oil, makes abnormal noises, or fails; 3. The vehicle pulls to one side; 4. When encountering bumpy roads, the vehicle vibrates up and down, and the body twists; 5. Obvious braking nod; 6. Abnormal noises from the body while driving.
8
3
Share

Is Land Rover Produced in India?

Not all Land Rover models are produced in India. Land Rover's lineup includes the Range Rover Evoque, Range Rover Velar, Discovery, Defender, and Range Rover, among others. Taking the 2021 Land Rover Defender as an example, it is a mid-to-large-sized SUV with body dimensions of 5018mm in length, 2008mm in width, and 1967mm in height, a wheelbase of 3022mm, and a minimum ground clearance of 218mm. The 2021 Land Rover Defender is equipped with a 3.0T turbocharged engine, delivering a maximum horsepower of 400PS, a maximum torque of 550Nm, and a maximum power of 294kW.
15
4
Share

What does the ECO display mean on the Beijing Hyundai Mistra?

The ECO display indicates that the vehicle's economical driving mode is activated. ECO is an English abbreviation derived from Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light will illuminate, and the vehicle will automatically adjust settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active Eco mode does not have a dedicated button. When the dashboard Eco indicator light comes on, it serves only as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most vehicles use the active Eco driving mode, which means they have a dedicated switch button. You can activate Eco mode during daily driving, except when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. In these situations, activating Eco mode may not only fail to demonstrate its fuel-saving characteristics but also affect the vehicle's power. Additionally, Eco mode typically becomes ineffective under the following conditions: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, and Eco mode automatically deactivates. During idle parking or in N/P gear or manual mode, Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit will prioritize ensuring sufficient power to drive the vehicle, and Eco mode will not function.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.