How Long After Waxing Can a Car Be Exposed to Rain?

What are the disadvantages of car crystal coating?

There are three main disadvantages of car crystal coating. Here is a detailed introduction to the disadvantages of crystal coating: 1. Damage to the car's surface: The original intention of car crystal coating is to protect the paint, but the process requires polishing the car paint. The original factory paint is usually evenly sprayed by automatic robots and is relatively thin. Typically, there are about 5 layers of paint, including primer and clear coat. Polishing can easily remove the gloss and clear coat on the car's surface. If not done properly, it may even expose the base color. 2. Dependence: Although crystal coating can last for a while, it generally does not exceed one year. Once the time is up, it is impossible to restore the original appearance, and another coating must be applied to keep the car body smooth. 3. Complicated maintenance: Car crystal coating is not a one-time process; it requires regular maintenance. If scratches occur and touch-up paint is needed, the coating process must be repeated after the touch-up. The later maintenance is relatively complicated.

18

4

Share

What does Chevrolet 530t mean?

The "530t" badge on the rear of the car. 1. The "5" indicates the product level: 5 represents mid-size cars, while 3 represents compact cars. 2. The "3" indicates engine torque: 3 means the torque is between 250 and 300 Nm, and if the second digit is 5, it means the torque is between 300 and 500 Nm. 3. The "0" represents power output: 0 is the low-power version, while 5 represents the high-power version. The final "t" stands for turbocharged engine. Additional info: Apart from identifiers like "530t," there are also 1.3, 1.5, 1.6, 1.8, 2.0, 2.3, 2.4, 2.5, 3.0, 3.5, etc., which refer to engine displacement. Larger displacement generally means higher fuel consumption. If the number is followed by a "t," it indicates a turbocharged engine. For the same displacement, a turbocharged engine (with "t") delivers stronger performance than a non-turbocharged one. For example, a 1.8T car is comparable to a 2.3L car in terms of power.

7

5

Share

How to Check if the ETC Card is Working Properly?

Methods to check if the ETC is functioning normally: Manually insert and remove the card. If there is a sound, it indicates that the ETC is in normal working condition. How ETC Works: Through the dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, the computer network technology is used to conduct background settlement processing with the bank. This achieves the purpose of vehicles passing through highway or bridge toll stations without stopping while still paying the toll. Where ETC Can Be Installed: For small vehicles such as cars and vans, the OBU device is installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle part. ETC Installation Position Requirements: The height should not be less than 1.2 meters or more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

9

1

Share

How to manually deactivate the anti-theft system on a Citroen C-Quatre?

Only by cracking the anti-theft password of the BSI. BSI is a general term for electronic control units: BSI is the electronic control unit of a car, a term for the car's computer. The BSI in the car's anti-theft system is the so-called anti-theft computer. Some car materials also label the engine control unit MCU and its corresponding peripheral circuits as BSI. Note: 1. There is only one way to activate the anti-theft system, which is by pressing the lock button on the remote control. Using the mechanical key to lock the car will not activate the anti-theft system. 2. There is only one way to deactivate the anti-theft system, which is by pressing the unlock button. Using the mechanical key to unlock the car will also trigger the anti-theft alarm. 3. In case the remote control fails, after opening the door with the mechanical key, inserting the key into the ignition and turning it to the power-on position can deactivate the alarm.

15

2

Share

Do I Need to Discharge the Battery Before Adding Electrolyte?

No. Before adding water to the battery, it should be fully charged (not discharged), because when the battery is out of power, the electrolyte level will be much lower than normal. If you add water to just reach saturation when the battery is discharged, it will definitely overflow a lot when the battery is charged. More details are as follows: 1. Charging current: When adding replenishment liquid to an electric vehicle battery, you can charge it with 1/10 of the rated charging current until the battery is fully charged. 2. Discharging: Then discharge it with one-tenth of the rated capacity until it is completely discharged. Repeat this process three or four times, and the car battery can be restored to its original state. However, it is important to note that high current should never be used, otherwise the consequences could be unimaginable.

19

0

Share

What Causes the Mazda Atenza's Throttle to Be Sometimes Light and Sometimes Heavy?

Here are the specific reasons why the Mazda Atenza's throttle may feel sometimes light and sometimes heavy: 1. Carbon buildup issues: Including carbon deposits in the cylinders, throttle body, spark plugs, and intake system. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power and weak idling. 2. Fuel system: Using an incompatible fuel grade, resulting in decreased vehicle output power and reduced performance; or due to a blocked fuel tank vent, clogged fuel tank switch, fuel filter, or fuel lines between the fuel tank and carburetor, which cannot supply the required amount of fuel, leading to a lean air-fuel mixture and weak engine acceleration. 3. Intake system: If the air filter is not cleaned in time after long-term use and becomes clogged, insufficient air volume will cause an overly rich air-fuel mixture, reducing engine power; for vehicles with turbochargers, if the turbocharging device fails, it can also lead to reduced engine power or weakness. 4. Engine overheating: Insufficient engine oil, low engine coolant, or malfunctioning engine cooling system can all increase the engine's load, leading to poor engine cooling. Engine overheating can result in poor lubrication, increased mechanical wear, reduced engine power, and higher fuel consumption.

2

Share

How Long After Waxing Can a Car Be Exposed to Rain?

What are the disadvantages of car crystal coating?

What does Chevrolet 530t mean?

How to Check if the ETC Card is Working Properly?

How to manually deactivate the anti-theft system on a Citroen C-Quatre?

Do I Need to Discharge the Battery Before Adding Electrolyte?

What Causes the Mazda Atenza's Throttle to Be Sometimes Light and Sometimes Heavy?

Which manufacturer produces the Elysion?

How to Remove Uncleanable Yellow Stains from Car Paint?

What are the most common symptoms of a faulty clutch slave cylinder?

Where is the front windshield defogger button on the new Santana?