···
Log in / Register

How long after using the Lamando should the first maintenance be performed?

4 Answers
RoseDella
08/26/25 5:11am

Volkswagen Lamando's first maintenance can be performed at 5,000 kilometers or 6 months. The details of the first maintenance are as follows: First maintenance content: Replace engine oil and oil filter; check the operation of the braking system, such as the gap and wear of brake pads and discs; tighten bolts of various systems; inspect and adjust the drive belt; check and adjust tire balance and alignment; inspect and replenish various fluids; check the operation of components like lights, battery, shock absorbers, etc. Purpose of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.

Was this review help?
15
5
Share
DelChristian
09/08/25 7:08am

I remember when I was driving, the first maintenance for Volkswagen models like the Lamando was usually recommended at around 5,000 kilometers or six months, depending on your vehicle's usage. My car didn't get its first maintenance on time, and later I found the engine oil had turned black, and fuel consumption increased. The first maintenance isn't just about changing the oil and filter; it also includes checking critical components like brakes and tires to ensure the car runs smoothly on highways. I suggest you don't delay it too long, or you might face issues after the warranty expires. If you drive aggressively, such as frequent long-distance trips or traffic jams, it's better to visit a 4S shop or authorized service center a bit earlier for peace of mind and to extend your car's lifespan.

Was this review help?
5
0
Share
Expand All
Angela
10/22/25 7:13am

Last time my friend bought a Lamando, and the dealership reminded him to do the first maintenance at 5,000 kilometers. However, he delayed it until over 6,000 kilometers, and ended up with a bunch of minor issues. I think as a new car owner, it's important to develop good habits. Generally, it's crucial to do the first maintenance within six months or 5,000 kilometers for a new car. This includes changing the engine oil, checking the electrical circuits, and more. Don’t think it’s just about changing the oil—it also helps prevent major repair costs in the future. Now that the weather is hot, the engine is prone to overheating. After the first maintenance, the car runs much smoother, just like my friend said, the acceleration feels a lot more fluid. Remember to check the owner’s manual for the most accurate information to avoid missing the deadline and having to pay for repairs later.

Was this review help?
8
0
Share
Expand All
StRicardo
12/05/25 7:37am

As someone who has been driving for over a decade, I believe the optimal time for the first maintenance of the Lamando is within 5,000 kilometers or six months. Don't wait until problems arise—delaying might affect the warranty. The first maintenance includes oil change, air filter replacement, and a comprehensive check of lights, brakes, etc. If you don't drive much daily, don't exceed one year at most. Prolonging it too much will increase engine wear and result in higher repair costs. My advice is to set a mileage reminder—it's simple and worry-free.

Was this review help?
15
4
Share
Expand All
More Forum Discussions

What are the reasons why the Lavida car key cannot lock the door?

There are several reasons why the car door cannot be locked, including remote lock failure, strong magnetic field signal interference around the car, and radio signal jammers. 1. Remote lock failure: If you are using the remote key to lock the door, it is likely that the remote lock is malfunctioning or the antenna of the car's remote transmitter is aging, causing the remote key to not work. In this case, you can use the spare mechanical key to lock the door. 2. Strong magnetic field signal interference around the car: Another situation is that there is strong magnetic field signal interference around the car. Since the smart key uses low-intensity radio waves, it cannot function properly under magnetic interference. 3. Radio signal jammer: If there is a place where the remote lock frequently fails, the car owner should be wary of a door jammer, as some criminals use a radio signal jammer that can emit electromagnetic waves at the same frequency as the lock signal, thereby blocking the electronic code of the car's central lock and temporarily disabling it.
17
1
Share

Why is there no response when starting the Cruze?

The reasons for no response when starting the Cruze are as follows: 1. Starter damage: (1) Phenomenon 1: No response when turning to START. The starter solenoid switch is damaged. (2) Phenomenon 2: A "click" sound is heard when turning to START, but the starter does not rotate. The main contacts of the starter solenoid switch are damaged, or the starter winding is damaged. (3) Phenomenon 3: A "click" sound is heard when turning to START, and the starter rotates at high speed. The starter one-way clutch is damaged. 2. Engine ignition system failure: The phenomenon is that when turning to START, the engine can be rotated (100r/min), but the engine does not start. Unplug the high-voltage wire (or ignition coil), and there is no spark when turning to START. 3. Engine fuel supply system failure: When in IG position, the "buzzing" sound of the fuel pump working in the fuel tank area cannot be heard.
2
4
Share

Can the car still be driven normally when the ABS yellow light is on?

After the ABS warning light comes on, the vehicle can still be driven, but the ABS system will not function, and the wheels may lock up during emergency braking. Therefore, you should drive cautiously after the light comes on and try to avoid sudden braking. Once the wheels lock up, the driver loses control of the steering, and the car can only slide forward or to one side, which is very dangerous. The functions of ABS are as follows: 1. Shorten braking time: Maximize the effectiveness of the brakes, reducing braking time and distance. 2. Driving stability: Effectively prevent skidding and fishtailing during emergency braking, ensuring good driving stability. 3. Steering control: Allows steering during emergency braking, providing good steering control. 4. Reduce wear: Avoids severe friction between the tires and the ground, reducing tire wear.
20
3
Share

What to Do If Driving License Points Exceed 12?

A and B class driving licenses will be directly downgraded if 12 points are deducted, while C class driving licenses require retaking Subject 1 exam. Below is relevant information about driving licenses: 1. Introduction: The full name of a driving license is motor vehicle driving license, which is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain skills. Those lacking such skills may cause traffic accidents if driving arbitrarily. Generally, people cannot drive on roads without a license. However, for those who have mastered safe driving techniques, the document that permits them to drive vehicles on roads is called a "driving license". This indicates that a driving license is a "certificate of permission". 2. Examination Content: The test subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). Each subject requires prior appointment before taking the exam (special circumstances may be scheduled through the driving test green channel), followed by the examination.
12
1
Share

What are the reasons for abnormal noise from one side of the car audio speaker?

Speaker plug terminal looseness, speaker relay contact burning, poor contact of the horn switch at the steering wheel, etc. However, among many speaker failures, especially in winter, the problem is more often caused by the speaker itself. The following are the reasons for abnormal noise from the speaker: 1. Contact burning: If the horn is pressed for a long time, it is easy to cause the horn contacts to burn and generate impedance, weakening the current flowing through the electromagnetic coil and reducing the electromagnetic suction force, making it unable to attract the armature to drive the diaphragm to vibrate normally, resulting in a hoarse sound or even no sound. However, when the horn is pressed continuously, if a strong instantaneous current passes through the impedance, it can still work normally, so the problem may come and go. 2. Poor sealing leading to moisture: Although the interior of the speaker is sealed, if the sealing is not tight, moisture may enter during car washing, or there may be water vapor in the internal space, which can easily cause the contacts to get damp and fail to work properly.
5
1
Share

What Causes Carbon Monoxide Poisoning from Car Air Conditioning?

Carbon monoxide poisoning from car air conditioning occurs because the tight sealing of car doors and windows makes it difficult for air inside and outside the vehicle to circulate. When the car is stationary but the air conditioning is still running, carbon monoxide produced by the engine can accumulate inside the car, leading to poisoning and loss of consciousness, and in severe cases, death. Below is an introduction to car air conditioning: 1. Overview: A car air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, designed to regulate the temperature and humidity inside the vehicle to provide a comfortable environment for passengers. 2. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser and liquefies. The liquid refrigerant then passes through the throttle device, where its temperature and pressure decrease before entering the evaporator.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.