How long after the inspection deadline is considered overdue?

Failed the Subject 2 Test Three Times, Losing Confidence to Retake. What Should I Do?

Subject 2 can be scheduled up to 5 times, with an additional retake opportunity on the spot, totaling 10 chances. The key to passing Subject 2 lies in extensive practice and adhering to standard procedures. Therefore, failing three times is not a big deal. What you need to do now is practice intensively before the test. If you can pass 8 out of 10 practice runs, you're ready to retake the exam. Here's an introduction to Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment, specifically the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns).

19

4

Share

How much impact does different tire tread patterns have on driving?

Tire tread patterns being different does not have much impact on driving. Relatively speaking, it is when the tread patterns on the same axle are different that it affects the overall handling of the vehicle. Below is more information about car tires: 1. Service life: Generally, the service life of tires is 3-5 years. Over time, even with careful driving, phenomena such as surface hardening and cracking may occur. Continuing to use them may lead to the risk of a tire blowout. 2. Precautions: Try to avoid turning the steering wheel while the car is stationary, as this will cause wear on a single contact surface of the tire, leading to severe local wear and shortening the tire's service life. The steering wheel should be turned while the wheels are rolling. Avoid driving over curbs or going up onto sidewalks, as this can easily cause the tire to bulge.

6

4

Share

What is the real fuel consumption of the 2021 Sylphy?

The real fuel consumption of the 2021 Sylphy is 4.9L/100km. Here are some methods to reduce fuel consumption: 1. Control your speed: The most economical speed is when the car is driving in direct gear or overdrive, which results in the lowest fuel consumption. Only at a certain speed will fuel consumption be minimized. Therefore, it is advisable to drive at a moderate speed in direct gear or high gear to save fuel. 2. Gear selection: Gear selection and shifting actions greatly affect fuel consumption. When starting, choose the appropriate gear based on the load and road conditions. 3. Proper coasting: Utilize downhill coasting—when the slope is not too steep and safety is ensured—to save fuel by appropriately coasting downhill. 4. Car maintenance: Keep the intake system clean and unobstructed. Frequently clean the air filter, ensure belt tension is appropriate, maintain proper tire pressure, and regularly adjust brake shoe clearance to avoid friction.

20

2

Share

Should Both the Clutch and Brake Be Pressed When Shifting Gears in Subject Two?

When shifting gears in Subject Two, you should first press the clutch and then the brake. The reason is that Subject Two only uses first gear and reverse gear throughout the test, with the speed controlled by the clutch. When you need to slow down or stop, you must first press the clutch fully and then use the brake to slow down or stop. There is only one exception: when stopping on a slope, once you identify the correct spot, press both the clutch and brake simultaneously to stop. The details are as follows: 1. Low Speed: When stopping at low speed, press the clutch first, followed by the brake until the car stops. This is because the lower the speed, the greater the friction resistance between the tires and the ground. If you press the brake first, the engine may stall. 2. Clutch Operation: The key points for clutch operation when starting are: fast, slow, and coordinated. Quickly lift the pedal at the beginning; when the clutch reaches the semi-engaged state (indicated by a change in the engine sound), lift the pedal slightly slower; during the transition from engagement to full connection, slowly lift the pedal. While lifting the clutch pedal, gradually press the accelerator pedal according to the engine resistance to ensure a smooth start.

7

0

Share

Will the insurance company compensate if I damage my car myself?

If you damage your car yourself and have purchased vehicle damage insurance, the insurance company will provide compensation. Below are the specific details about auto insurance claims: Here is the process for vehicle insurance claims: 1. Present the insurance policy, vehicle registration, the insured's ID, and the insurance policy. 2. Fill out the accident report form, provide a detailed account of the accident, and provide the contact information of the reporter and the driver. 3. Inspect the vehicle's exterior and take photos for damage assessment. 4. The claims adjuster will accompany the owner to inspect the vehicle's exterior, then take photos to verify the damage based on the owner's report, and remind the owner if there are any valuables in the car. 5. Deliver the vehicle to the repair shop, and the claims adjuster will issue a work order specifying the repair items and time. 6. Finally, the owner signs off and hands over the vehicle to the repair shop for repairs.

4

2

Share

Why are the front lights of a car on during daytime driving?

Daytime running lights (DRLs) are automatically turned on when the car is driven during the day, and they cannot be turned off. As long as the car is started, the lights will automatically illuminate. Below are specific details about DRLs: 1. Function: DRLs are not for illumination to help the driver see the road but rather to signal to pedestrians or other vehicles that a car is approaching, falling under the category of signal lights. 2. Requirements: DRLs must meet basic brightness requirements but should not be too bright. Unlike regular low-beam headlights, DRLs are specifically designed for daytime driving illumination. Those using LED technology further enhance energy efficiency, consuming only 10% of the energy used by regular low-beam headlights. When the car engine starts, the DRLs automatically turn on and gradually increase in brightness to attract the attention of other motor vehicles, non-motor vehicles, and pedestrians on the road.

20

4

Share

How long after the inspection deadline is considered overdue?

Failed the Subject 2 Test Three Times, Losing Confidence to Retake. What Should I Do?

How much impact does different tire tread patterns have on driving?

What is the real fuel consumption of the 2021 Sylphy?

Should Both the Clutch and Brake Be Pressed When Shifting Gears in Subject Two?

Will the insurance company compensate if I damage my car myself?

Why are the front lights of a car on during daytime driving?

Is it free to repair at a 4S shop during the car warranty period?

Does exceeding the maintenance mileage by 2000 kilometers affect the car?

What Does It Mean to Buy a Car on Mortgage?

What is the urban fuel consumption of the Geely Bin Yue?