How long after the cancellation of a C1 driver's license can one retake the test?

1 Answers
LeLola
07/25/25 5:07am
If a C1 driver's license is canceled during the probationary period, there is no time limit for reapplying for the driver's license test (except for cases of revocation or cancellation); individuals convicted of drunk driving must wait five years before retaking the test; those convicted of drunk driving commercial vehicles must wait ten years; and individuals involved in hit-and-run incidents are permanently barred from retaking the test. The test subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. Passing standards for the C1 driver's license test: Traffic regulations and related knowledge (Subject 1) — written test, scored out of 100, with 90 or above required to pass. Field driving (Subject 2) — conducted on-site with an actual vehicle. The minimum passing score is 80, and scores below 80 are considered failing. Road driving (Subject 3) — conducted on a highway or simulated site with an actual vehicle. Scored out of 100, with 90 or above required to pass. Safe and civilized driving knowledge — written test, featuring questions in the form of case studies, images, animations, etc., including true/false, single-choice, and multiple-choice questions. There are 50 questions in total, scored out of 100, with 90 required to pass.
Was this review help?
9
5
Share
More Forum Discussions

What is the tire size for Honda Accord?

225/50R17 and 235/45R18 are the tire sizes for Honda Accord. In 225/50R17, the first number 225 represents the tire width of 225MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 17 stands for the rim diameter of 17 inches. The middle letter "R" denotes a radial tire. In 235/45R18, the first number 235 represents the tire width of 235MM, 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, and 18 stands for the rim diameter of 18 inches. The middle letter "R" denotes a radial tire. The Honda Accord uses Michelin Primacy tires. These tires offer high levels of quietness and comfort. The spare tire is a non-full-size tire. In addition to the size, the tires also bear the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent the certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Shows the rim size compatible with the tire for practical use, e.g., standard rim 5.00F.
14
4
Share

Process After Successful Vehicle Transfer Application

Process after successful vehicle transfer application: Handling modification procedures: After acceptance by the vehicle management office, the vehicle owner should complete modification procedures at the office within the specified time. The office will then annotate the vehicle registration certificate, reclaim license plates and registration documents, issue temporary license plates valid for 30 days, and provide the vehicle owner with the vehicle archive. Applying for transfer-in: After obtaining temporary license plates, the vehicle owner should apply for vehicle transfer-in at the local vehicle management office within the validity period of the temporary plates. Vehicle transfer-in process: Documents: Before handling transfer-in procedures, prepare the original ID card and its copy, vehicle registration certificate, and vehicle archive. Obtaining application form: After arriving at the local vehicle management office service hall, submit a transfer-in application and obtain the vehicle transfer-in application form. Review and inspection: After completing the form, submit it along with relevant materials to staff for review, and present the vehicle for inspection. If the vehicle exceeds the inspection validity period during transfer, it needs to be inspected locally, with submission of inspection qualification certificates and compulsory traffic insurance proof. Verification and confirmation: Within three days of acceptance, the vehicle management office will confirm the vehicle, verify the vehicle identification number imprint, review relevant certificates and proofs, and examine the vehicle archive. Recording information: After approval, transfer-in information will be annotated on the vehicle registration certificate, and new license plates, registration documents, and inspection qualification marks will be issued.
12
2
Share

What is the actual fuel consumption of the Changan CS75?

The fuel consumption of the Changan CS75 is 6.6 to 7.0L per 100km. Methods to reduce fuel consumption are as follows: Regular maintenance: Regular maintenance can reduce the failure rate of the car and also lower its fuel consumption. Maintenance includes regularly replacing parts such as spark plugs, oil filters, brake fluid, radiator coolant, air conditioning filters, power steering fluid, and transmission fluid. Keeping the vehicle in optimal condition helps reduce fuel consumption. Avoid heavy acceleration: Heavy acceleration only shortens driving time by 4%, but increases fuel consumption by 37% to 40%. On typical urban roads, the speed is usually maintained at 50 kilometers per hour, with the engine speed generally between 2000 and 2500 RPM. On highways, the speed is usually between 90 and 110 kilometers per hour. For every 10 km/h increase in speed, fuel consumption increases by 10%. Avoid heavy acceleration because engine speed is the biggest factor affecting fuel consumption.
18
5
Share

What is the steering wheel rhyme for Subject 2?

Subject 2 steering wheel operation rhyme: Left hand at nine and ten o'clock, right hand at three and four o'clock; Thumbs placed on the inner upper side, strictly no sudden pushing or pulling; Left hand dominates while right hand assists, both hands turn the wheel at the same angle. Before the turn, ease off the gas and apply light brake; During the turn, return the wheel and then accelerate; Look far ahead while minding the near, foresight ensures safety. Steering wheel operation precautions: There are major and minor crossovers when turning the steering wheel, pay attention to the nine prohibitions: Do not rest both hands on the steering wheel; Do not hold the steering wheel with both hands; Do not make small, choppy turns; Do not oppose the wheel; Do not turn the wheel in the opposite direction; Do not grope the wheel; Do not wait for the wheel; Do not let the wheel return freely; Do not remove both hands from the steering wheel simultaneously.
9
2
Share

What are the maintenance items for a scooter motorcycle?

Maintenance items include oil change, air filter cleaning, spark plug replacement, air filter replacement, gear oil change, tire cleaning, motorcycle waxing, and gasoline refueling. The following is a detailed introduction about motorcycle maintenance: Oil filter: The oil filter is the oil cleaner, and its function is to filter out impurities, gum, and moisture from the oil, delivering clean oil to various lubrication points. Air filter cleaning: During maintenance, only the vibration method, soft brush removal method (brushing along its folds), or compressed air reverse blowing method should be used to remove dust and dirt attached to the surface of the paper filter element. For the coarse filter part, promptly remove dust from the dust collection area, blades, and cyclone tubes.
16
0
Share

What is the fuel consumption of the Qashqai?

The fuel consumption of the Qashqai is 6.8 to 7.3L per 100km. Methods to reduce fuel consumption are as follows: Regular maintenance: Regular maintenance can reduce the failure rate of the car and also lower its fuel consumption. Maintenance includes regularly replacing parts such as spark plugs, oil filters, brake fluid, radiator coolant, air filters, power steering fluid, and transmission fluid. Keeping the vehicle in optimal condition helps reduce fuel consumption. Maintain tire pressure within the normal range: Checking tire pressure not only benefits fuel consumption but also relates to driving safety. It is important to develop the habit of checking tire pressure daily. Generally, the front tire pressure should be between 2.2 to 2.3, and the rear tire pressure between 2.4 to 2.5.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.