How Long After Starting in Subject 3 Should You Shift to 2nd Gear?

What is the tire model and specification of the Reiz?

The tire specifications for the Reiz are 235/45R18 and 215/60R16, corresponding to the high-end model and the low-end/sub-low-end models respectively. The Reiz's body dimensions are 4750mm in length, 1795mm in width, and 1450mm in height, with a wheelbase of 2850mm. In terms of suspension, the front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. The vehicle offers two powertrain options: 1. Equipped with a 2.5-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 142KW, maximum horsepower of 193PS, and maximum torque of 236Nm; 2. Equipped with a 3.0-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 167KW, maximum horsepower of 227PS, and maximum torque of 293Nm.

13

1

Share

What to Do When a Diesel Car Emits Black Smoke?

Solutions for diesel cars emitting black smoke: 1. Remove the air filter and observe the exhaust smoke color. If the black smoke condition improves, the fault is caused by severe dirtiness of the air filter; 2. During engine operation, conduct a cylinder-by-cylinder fuel cut-off test. When a certain cylinder is cut off, if the engine speed decreases, black smoke significantly reduces, and knocking sounds weaken or disappear, it indicates excessive fuel supply to that cylinder. If the engine speed changes little and black smoke disappears, it suggests poor spray quality of the injector in that cylinder; 3. Check if the fuel supply timing is too early. If it is, adjust it accordingly. After identifying the faulty cylinder, disassemble and inspect the injector. If necessary, replace it with a new injector for comparison. If the fault disappears with the new injector, it indicates a problem with the original injector.

12

4

Share

What brand of tires does the GAC Honda Lingpai use?

Honda Lingpai is equipped with Maxxis brand VICTRA-510 series tires, with the specification of 215/55R16. These are paired with 16-inch two-tone alloy wheels, capable of a maximum load capacity of 610KG and a top speed of 210km/h. Here are some relevant details: 1. The tires used for this model are from the Maxxis brand. Their tread patterns mainly fall into four series: Sport Series, Comfort Series, Economy Series, and SUV Series. Different tread patterns can affect the vehicle's performance, fuel consumption, tire noise, and road condition adaptability. 2. Products from the Maxxis brand have certain characteristics—they are relatively wear-resistant, economical, and offer a high comprehensive cost-performance ratio. 3. For over fifty years, the company has consistently provided high-quality tire products for sedans, light trucks, bicycles, motorcycles, ATVs, trailers, and other vehicle types. Their products are sold in more than 170 countries, with business operations spanning Asia, Europe, and North America, making it one of the world's leading tire brands.

17

4

Share

Can I directly add coolant if it's insufficient?

Coolant can be directly added if it's insufficient, but it must be the same type. Different brands of coolant have varying production formulas, and mixing them may cause chemical reactions between additives, rendering them ineffective. How to choose coolant: The basic indicators of coolant are freezing point and boiling point. Coolants on the market come in freezing points such as -15℃, -25℃, -30℃, and -40℃. Generally, it's advisable to choose one that is at least 10℃ lower than the lowest temperature in your area. How to determine if coolant is insufficient: Observe the coolant warning light on the dashboard. If it lights up, it's likely due to insufficient coolant, though it could also be caused by excessively high engine temperature. Check the coolant reservoir. If the level is below the minimum mark (MIN), do not continue driving; add coolant promptly. Check the water level scale on the coolant overflow tank. The normal coolant level should be between the maximum and minimum marks. If it's below the minimum mark, it indicates insufficient coolant.

8

1

Share

What engine does the Yema Spica use?

The Yema Spica is equipped with a 1.5-liter naturally aspirated engine across all variants. The Yema Spica is an MPV model. Here are more details about the Yema Spica: 1. The 1.5-liter naturally aspirated engine in the Yema Spica delivers 112 horsepower and a maximum torque of 136 Nm. This engine reaches its peak power at 5,500 rpm and its maximum torque at 4,500 rpm. It features multi-point fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. The engine is paired with a 5-speed manual transmission, which offers better reliability, durability, and higher transmission efficiency. 2. The front suspension of the Yema Spica uses a MacPherson independent suspension, while the rear suspension employs a multi-link non-independent suspension. The multi-link non-independent suspension is essentially a solid axle suspension, known for its simple structure, reliability, and durability. It also enhances the vehicle's load-carrying capacity. 3. The dimensions of the car are 4,580 mm in length, 1,730 mm in width, and 1,825 mm in height, with a wheelbase of 2,800 mm.

2

5

Share

Which side is the accelerator in a manual transmission car?

In a manual transmission car, the accelerator is on the right. A manual transmission car has three pedals, from left to right: the clutch pedal, the brake pedal, and the accelerator pedal. The left foot controls the clutch pedal, while the right foot controls both the brake and accelerator pedals. To avoid mistakenly pressing the accelerator instead of the brake: first, stay focused; second, it's safest to keep the right foot on the brake, ideally pressing the accelerator at an angle and the brake straight on. To maintain a steady speed, the accelerator must follow the principle of "press lightly and release gently, smoothly and evenly." When pressing the accelerator, do so gradually to allow the speed to increase steadily, resulting in smoother acceleration. As the car accelerates and gains speed, releasing the accelerator should also be done gradually. When pressing the accelerator, use the ball of the foot to press the pedal. Once the desired speed is reached, use the heel as a pivot point to stabilize the pedal, preventing sudden fluctuations in speed. It's best to drive wearing flat shoes or shoes with thin soles, as this helps in sensing the depth of the accelerator.

5

Share

How Long After Starting in Subject 3 Should You Shift to 2nd Gear?

What is the tire model and specification of the Reiz?

What to Do When a Diesel Car Emits Black Smoke?

What brand of tires does the GAC Honda Lingpai use?

Can I directly add coolant if it's insufficient?

What engine does the Yema Spica use?

Which side is the accelerator in a manual transmission car?

Where is the Corolla dome light button?

What are the reasons why the Geely Vision has power but cannot start?

How Often Should Manual Transmission Clutch Plates Be Replaced in Terms of Mileage?

What Are the Hazards of Fire-Damaged Vehicles?