How long after paint touch-up can I wash the car?

1 Answers
DiGenevieve
07/29/25 10:24am
You can wash the car two days after repainting. Car paint maintenance waxing: Waxing forms a protective wax layer on the car's surface, isolating the paint from the external environment, thereby protecting the paint and preventing oxidation and fading. New cars don't need waxing within the first 3 months of purchase, and waxing should not be done too frequently afterward, as excessive waxing can damage the paint. It's recommended to wax at most once every two months. When waxing, apply force evenly and maintain a consistent waxing direction. Car paint maintenance timely cleaning: After driving in the rain, wash the car promptly once the weather clears to avoid acid rain corrosion.
Was this review help?
17
5
Share
More Forum Discussions

Is a Temporary Residence Permit Required for Taking the Driver's License Test in Chengdu?

Chengdu does not require a temporary residence permit for taking the driver's license test. Here are the necessary documents for taking the driver's license test in Chengdu: 1. ID Card: A valid ID card is the most important document for enrolling in a driving school. However, if you are an officer or a non-commissioned officer, you will need to provide a military officer's certificate or a soldier's certificate. Additionally, you will need to prepare a corresponding proof of employment at a certain location. 2. Medical Examination Form: Prepare a professional medical examination form for the driver's license. This form must be completed at a hospital at or above the county level. 3. Photos: After the driving school policy adjustment in 2017, personal photos can no longer be used. You must prepare professional photos with a 'receipt slip'.
15
2
Share

When did Henan Province stop issuing license plates for China V vehicles?

Henan Province has stopped issuing license plates for China V vehicles since July 1, 2019. According to the relevant regulations of the "Limits and Measurement Methods for Emissions from Heavy-Duty Diesel Vehicles (China VI)" issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine, the China VI standard was implemented nationwide from July 1, 2019, imposing stricter emission limits on the following three pollutants: 1. Carbon monoxide; 2. Nitrogen oxides; 3. Hydrocarbons. The China V standard was also phased out on the same day, but the specific timeline for the phase-out varies depending on local implementation.
1
0
Share

Is it necessary to install a tire pressure monitoring system in a vehicle?

Is it necessary to install a tire pressure monitoring system in a vehicle? The introduction is as follows: It is necessary to install a tire pressure monitoring system in a vehicle. The tire pressure monitoring system can issue an alarm when abnormal tire pressure is detected, promptly reminding the driver to take appropriate measures to avoid serious accidents. Additional information: 1. The role of the tire pressure monitoring system: Under the same driving distance, insufficient tire pressure will consume 3.3% more fuel. By using the tire pressure monitoring system to keep track of tire conditions, it helps prevent tire blowouts, save fuel, and protect the environment. 2. The impact of abnormal tire pressure: Excessive tire pressure reduces the shock absorption effect of the tires, thereby increasing the burden on the vehicle's suspension system. If the tire pressure is insufficient or uneven, it can easily cause the vehicle to pull to one side during braking, increasing wear on the suspension system.
15
3
Share

How many kilometers can you drive when the oil yellow light comes on?

When the oil yellow light comes on, you can still drive approximately 50 kilometers. Here is some relevant information about the oil warning light: 1. Introduction: When the oil light on the car dashboard comes on, it generally has two colors: yellow and red. A yellow light indicates that the oil level is starting to get low, but the car can still operate normally. If it's red, it means the oil is severely low or blocked, and you should stop the car immediately and call for a tow truck. 2. Reasons for the warning light coming on: (1) Insufficient oil level, which reduces the oil pump's output or prevents it from pumping oil due to air intake, leading to a drop in oil pressure. (2) Overheating of the engine, which can thin the oil, causing it to leak excessively through the gaps and resulting in a drop in oil pressure. (3) When the oil pump components are damaged or have excessive gaps due to wear, assembly issues, etc., it can cause the oil pump to fail to pump oil or pump insufficient oil.
12
4
Share

What are the components of the crank connecting rod mechanism body group?

The components of the crank connecting rod mechanism body group are as follows: 1. The crank connecting rod mechanism consists of three parts: the body group, the piston connecting rod group, and the crankshaft flywheel group. 2. The crank connecting rod mechanism body group is composed of the cylinder block, cylinder gasket, cylinder head, crankcase, cylinder liner, and oil pan. The function of the crank connecting rod mechanism is to convert the thermal energy generated by fuel combustion into mechanical energy, transforming the reciprocating motion of the piston into the rotational motion of the crankshaft through the connecting rod to output power externally. Below is an introduction to the crank connecting rod mechanism: 1. Function of the crank connecting rod mechanism: To convert the thermal energy generated by fuel combustion into mechanical energy, transforming the reciprocating motion of the piston into the rotational motion of the crankshaft through the connecting rod to output power externally. 2. Composition of the crank connecting rod mechanism: The crank connecting rod mechanism consists of three parts: the body group (mainly including stationary components such as the cylinder block, crankcase, oil pan, cylinder liner, cylinder head, and cylinder gasket), the piston connecting rod group (mainly including moving components such as the piston, piston rings, piston pin, and connecting rod), and the crankshaft flywheel group (mainly including mechanisms such as the crankshaft, flywheel, torsional damper, and balance shaft).
3
3
Share

What is the fuel consumption of the Magotan 330?

The fuel consumption of the Magotan 330 is 6.3L. Taking the Magotan 2020 330TSI DSG Leading model as an example, the following are the relevant details: 1. Powertrain: It is equipped with a 2.0T inline four-cylinder engine, with a maximum torque of 320 Nm and a maximum power of 137 kW. The fuel tank capacity is 66L, and it adopts a front-engine, front-wheel-drive layout. 2. Dimensions: The vehicle's length, width, and height are 4865mm, 1832mm, and 1471mm respectively, with a wheelbase of 2871mm. The body type is a 4-door, 5-seater sedan. 3. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. The tire specification is 215/55R17.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.