How long after obtaining a motorcycle license can one apply for a C license?

1 Answers
ColeFitz
07/30/25 9:40am
You must have held the motorcycle license for more than one year, and there should be no record of accumulating 12 penalty points in the current scoring cycle or the most recent scoring cycle before applying, in order to be eligible for the C license. Here are the detailed relevant information: Application method: You need to bring your ID card and photos to the local traffic police station to register for the motorcycle license test and pay the registration fee. To obtain a motorcycle license, you must pass the traffic rules test, with two attempts allowed per person. Retakes require a one-month interval. After passing the written test, a road test is required, during which you must wear a safety helmet and pass the S-curve road test. Precautions: You are ineligible if you have caused a fatal traffic accident while driving and bear primary or full responsibility. Driving under the influence of alcohol or while intoxicated also disqualifies you.
Was this review help?
9
2
Share
More Forum Discussions

Is Dongfeng Venucia a Domestic or Joint Venture Brand?

Domestic independent brands include Dongfeng Venucia. Dongfeng Venucia is a domestic car brand under Dongfeng Motor, with core technologies and components sourced from Nissan. Models under the Dongfeng Venucia brand include: Venucia D50, Venucia R50, Venucia R50X, Venucia R30, Venucia T70X, Venucia T90, etc. Brand Development History: In September 2010, Venucia was established, officially launching the independent brand "Venucia". In April 2012, upon the launch of its first model, the D50, Venucia announced the "V Cube" strategy, aiming to achieve cumulative sales of 1 million units within 5 years. On September 8, 2012, the Venucia R50 was launched. On April 10, 2013, the 2013 models of D50 and R50 were launched. On September 8, 2013, the Venucia Beidou Navigation Edition was launched. On October 20, 2013, the Venucia R50X was launched. In 2017, it became independent from the domestic brand and operated independently. In 2021, it officially returned to Dongfeng Nissan, becoming a subordinate division under Dongfeng Nissan.
1
1
Share

What gear should be used for climbing a slope with a Vios?

When climbing a slope with a Vios, generally shifting to D gear is sufficient. Climbing capability: The climbing capability of a car is evaluated by its maximum gradient, which refers to the maximum slope that a fully loaded car can overcome in first gear on a good road surface. Testing method for a car's maximum climbing gradient: Select a slope similar to the expected climbing gradient of the car, with a slope length greater than 25m and an 8-10m straight section before the slope. The test car should be parked on the straight section near the base of the slope, with the transmission set to the maximum traction output gear (usually first gear). After starting the car, press the accelerator pedal to the floor to climb the slope. If the car can successfully climb the slope, then select a steeper slope for testing until the car can no longer climb. The maximum slope that the car can climb is the maximum gradient it can overcome.
5
5
Share

What to Do If You Accidentally Run a Red Light?

According to Article 2, Section 1, Clause 2 of the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle in violation of traffic signal lights will result in a deduction of 6 points. Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. According to Article 26 of the 'Road Traffic Safety Law': Traffic signal lights consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Article 44 states that motor vehicles passing through intersections must proceed in accordance with traffic signal lights, traffic signs, road markings, or the instructions of traffic police. Based on the following points, you can avoid running a red light: First, look at the arrow light, then the circular light: Currently, there are two types of indicator lights: arrow traffic lights and circular indicator traffic lights. When arrow lights are present, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, you may turn right; when encountering an arrow signal light with a red right-turn arrow, you must not turn right, otherwise, you will be penalized for running a red light. Brake in time: When the red light turns on, do not let the front of your vehicle cross the stop line. If the front wheels accidentally cross and the rear wheels follow, the electronic camera will capture it, and you will be penalized for running a red light. If the front wheels have just crossed the stop line when the signal turns red, do not proceed through the intersection; wait for the green light before continuing. Check the green light countdown before proceeding: When the green light is flashing, if there is a countdown, use it to judge whether to proceed. If there is no countdown and your vehicle is close to the intersection with high speed, you may proceed to avoid running a red light due to delayed braking. If your speed is slow and you are far from the intersection, brake immediately to stop and avoid running a red light. Article 38 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' states the following for motor vehicle and non-motor vehicle signal lights: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signal lights, non-motor vehicles and pedestrians must follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If you are captured by surveillance cameras while yielding to such vehicles, manual review will not record the act of running a red light. Even if recorded, you can apply for reconsideration with the traffic police department. Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights, the evidence of violation may be blurry, and the traffic police will not penalize you for mistakenly running a red light. Emergency situations: When transporting a critically ill patient to the hospital, you may run multiple red lights, and 12 points may not be enough. After delivering the patient, provide proof from the hospital or the person being assisted to the traffic police for verification. If confirmed, the violation records can be cleared. If possible, it is best to call an ambulance to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at major intersections. Drivers must follow the gestures of the traffic police.
13
3
Share

Is it harmful if half of the car tire is submerged in water?

Although there is no explicit provision in national laws prohibiting driving barefoot, some regional implementation measures have added regulations prohibiting driving barefoot, wearing slippers, or high heels. Hazards of driving barefoot: Bare feet can easily slip due to sweat, which is very dangerous in emergency situations. Driving barefoot is not as easy to control in terms of force compared to driving with shoes on. Over time, the muscles in the soles of the feet will fatigue, weakening or even losing the perception of force feedback on the pedals. Combined with the effect of sweating on the soles, it can easily lead to slipping and operational errors. Therefore, driving barefoot is not allowed. Choosing shoes for driving: 1. It is suitable to wear thin-soled, soft flat shoes. Flat shoes fit the feet completely, allowing full control of the brake, clutch, and accelerator when applying force, making the car easier to control, ensuring both safety and good foot feel. 2. Canvas shoes, flat leather shoes, and some lightweight running shoes are relatively suitable. If possible, keep a pair of shoes specifically for driving in the car. This way, you can wear your favorite shoes when going out normally and also wear suitable driving shoes to ensure driving safety.
18
2
Share

Why can't I use remote control after activating BMW ConnectedDrive?

BMW ConnectedDrive is activated but remote control cannot be used because it doesn't work in underground garages, suburban areas, crowded places, or when the signal is poor. Remote control activation methods: Via traditional remote key: Press the [Lock] button three times consecutively. Via display key: After swiping up to unlock, find the remote control interface, press and hold the middle [START/STOP] button for about 2 seconds until the engine starts, then the button turns green. Via BMW Connected app on smartphone: Enter the [Vehicle] menu to access the vehicle status and control interface, locate the [Ventilation Now] button (a fan-shaped icon), tap to display the remote engine start option, then confirm. Shutdown methods: The remotely started engine will automatically shut down after 15 minutes of operation. If you reach the vehicle within 15 minutes, you can manually turn off the engine. Using the traditional remote key, you can press the lock button three times consecutively to shut down the engine.
1
5
Share

Where to install ETC on the windshield?

For small cars, the ETC device is generally installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect microwave signal transmission, the device should be installed in the microwave sunroof strip area. ETC stands for Electronic Toll Collection. To apply for an ETC device, you need to provide the original and photocopies of the vehicle owner's valid ID and vehicle registration certificate. If the application is handled by a proxy, the proxy's valid ID is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card under the owner's name (aged 18 to 60) is required for deducting highway tolls. Here are some important considerations for ETC installation: 1. Avoid obstructing the driver's view. The best position is behind the rearview mirror. Many car models have windshields with a steep incline, which can reduce the driver's field of vision. Installing the ETC device behind the rearview mirror on the right side can help avoid blocking the view. 2. Ensure proper charging. The ETC device requires power but generally does not need manual charging or battery replacement, as it has a built-in solar panel. Therefore, avoid installing it on the blackened areas of the windshield or any position that might block the solar panel. 3. Do not remove the device once installed. The adhesive pad has an anti-tamper switch connected to a button. When installed, the windshield presses this button in. If the device is removed, the button pops out, triggering the switch and locking the device, which then requires unlocking at an ETC service center. This feature prevents multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle in front due to its faulty ETC device, maintain a distance of at least 10 meters. The ETC lane recognizes vehicles at a speed of 20 km/h; driving too fast may result in failed toll deduction. Also, insufficient balance on a debit card linked to ETC can cause payment failure.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.