How long after obtaining a Class D license can you apply for a Class C1 license?

1 Answers
Finn
07/29/25 11:09am
After obtaining a Class D license, you can apply for an additional Class C1 driver's license one year later. According to Article 15 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' if you already hold a motor vehicle driver's license and wish to apply for an additional permitted vehicle type, you must not have accumulated 12 penalty points in the current scoring cycle and the most recent scoring cycle before the application. For applying to add medium-sized buses, tractors, or large buses to the permitted vehicle types, the following additional regulations apply: To apply for adding medium-sized buses to the permitted vehicle types, you must have held a license for driving city buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles for at least three years and must not have accumulated 12 penalty points in the three most recent consecutive scoring cycles before the application. To apply for adding tractors to the permitted vehicle types, you must have held a license for driving medium-sized buses or large trucks for at least three years, or have held a license for driving large buses for at least one year, and must not have accumulated 12 penalty points in the three most recent consecutive scoring cycles before the application. To apply for adding large buses to the permitted vehicle types, you must have held a license for driving city buses, medium-sized buses, or large trucks for at least five years, or have held a license for driving tractors for at least two years, and must not have accumulated 12 penalty points in the five most recent consecutive scoring cycles before the application.
Was this review help?
1
0
Share
More Forum Discussions

What is the cause of p029900 engine insufficient boost?

p029900 engine turbocharger insufficient boost should check whether the turbocharger bypass valve and linkage mechanism are stuck, and whether the intake duct is blocked. Relevant information is as follows: 1. Turbo engine: The turbocharger is in a state of insufficient boost. Replacing the turbocharger can solve the problem. To prevent over-boosting of the turbo/supercharger, when the pressure reaches the set maximum value, the air pressure will push the wastegate actuator (pneumatic mechanical type) to bypass part of the exhaust gas around the turbine, thereby reducing the turbine speed and lowering the boost level. If the wastegate, wastegate regulating valve, boost bypass valve, boost pressure sensor, etc. fail, it may cause insufficient system boost. 2. Clear fault codes: After troubleshooting the car, the fault codes need to be cleared. When clearing fault codes, strictly follow the fault code clearing method specified for the specific vehicle model.
5
3
Share

What brand of tires does the Bluebird use?

The Bluebird uses Yokohama tires, specifically the BluEarth model, which is an economical tire. Here are some details about the Bluebird: 1. In terms of power, the Bluebird is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 126 hp, a maximum power of 93 kW, and a maximum torque of 168 N·m. 2. For transmission, the Bluebird offers a 5-speed manual or a CVT continuously variable transmission. 3. In terms of fuel consumption, according to the MIIT comprehensive fuel consumption data, the Bluebird consumes 6L/100km. 4. For suspension, the Bluebird features a MacPherson strut front suspension and a torsion beam rear suspension. 5. In terms of tire specifications, the Bluebird has two tire sizes: 205/50R17 and 195/60R16. 6. For engine-specific technologies, the Bluebird utilizes DIS dual fuel injection technology and dual C-VTC intelligent control systems. 7. In terms of engine materials, the Bluebird uses an aluminum alloy cylinder block and cylinder head.
8
4
Share

What is the NORMAL mode in a car?

NORMAL in a car refers to the conventional meaning, which is a driving mode, specifically the standard driving mode. Below are the characteristics of different driving modes in a car: 1. "NORMAL" mode: Achieves the optimal balance between fuel economy, quietness, and power performance. Suitable for urban driving. 2. "SPORT" mode: Controls the transmission and engine to enable quick and powerful acceleration. This mode also alters the steering feel, suitable for situations requiring agile driving responses, such as driving on winding roads. When Sport mode is selected, the "SPORT" indicator on the multi-information display will illuminate. 3. "ECO" mode: Helps the driver accelerate in an environmentally friendly manner and improves fuel economy through moderate throttle characteristics and control of the air conditioning system operation (heating/cooling). When Eco mode is selected, the "ECO MODE" indicator on the multi-information display will illuminate. When the air conditioning is in use, the system automatically switches to the air conditioning Eco mode for better fuel economy.
6
1
Share

How to Solve the Shaking Issue When Starting a Cold Volkswagen Sagitar?

Severe shaking during cold starts of the Volkswagen Sagitar is generally related to the fuel injection system, ignition system, and idle control system. Below are relevant explanations about cold starts: 1. The primary cause of cold start shaking is low temperature. The engine's internal temperature is insufficient, so more fuel should be injected during cold starts to meet power requirements. 2. The larger the spark plug gap, the smaller the ignition energy. At low temperatures, fuel atomization is poor, requiring higher ignition energy. Over time, the spark plug's ignition gap tends to widen, leading to reduced ignition energy, which affects power performance and causes the car to shake. Additionally, aging ignition coils, high-voltage wires of spark plugs, or electrical leakage can also result in decreased ignition energy. 3. Inaccurate air-fuel mixture ratio occurs in both open-loop and closed-loop controls. If the car's computer makes an incorrect judgment, errors in controlling the air-fuel mixture and ignition timing through the actuators may reduce the car's power output, causing shaking. 4. Carbon deposits. Excessive carbon buildup on the valves and intake manifold can make cold starts difficult, as carbon deposits can absorb an appropriate amount of fuel, leading to ECU judgment errors.
14
5
Share

What is the purpose of the oil grade in Honda maintenance?

Oil grades represent different categories of engine oil. Numbers such as 20, 30, 40, and 50 indicate the viscosity of the oil, with higher numbers representing thicker oil, which is suitable for use in high-temperature regions. The terms 0W, 5W, 10W, 15W, 20W, and 25W, where "W" stands for winter, indicate that the smaller the number before the "W," the better the low-temperature viscosity. Below is an introduction to Honda engine oil: 1. Engine oil is divided into three types. The first is conventional mineral oil, which should be replaced after the vehicle has traveled 5,000 km. The second is semi-synthetic oil, which should be replaced after the vehicle has traveled 7,500 km. The third type is fully synthetic oil, which should be replaced after the vehicle has traveled 10,000 km. Comparatively, fully synthetic oil is more cost-effective. 2. Honda turbocharged engines use fully synthetic oil. Fully synthetic oil has a longer maintenance cycle, lasting one year or up to 10,000 km, and provides better lubrication for the engine, making it more suitable for turbocharged engines.
18
3
Share

Where is the rearview mirror heating switch on the Haval F7?

The defrosting (i.e., heating) function button for the Haval F7's rearview mirrors is located on the air conditioning panel. Below are the specific details about the rearview mirror heating function: 1. Function: After pressing the button, the electric heating pads behind the rearview mirror glass will quickly heat up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. Warm air will emanate from both left and right rearview mirrors, and the water droplets on the mirror surface will gradually evaporate due to the rising temperature, becoming smaller. The fog will also slowly disappear, thereby achieving the effect of heating the mirror, defogging, and defrosting. 2. Precautions: Each use should not exceed 30 minutes, as prolonged use may affect the mirror's lifespan and clarity.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.