How long after new car registration can the filing be completed?

Has the Night Driving Test for Class C Driver's License Been Cancelled?

2016 driving test reforms have cancelled the night driving test since April 1st, replacing it with daytime lighting simulation tests. This means students can proceed with the road test after completing corresponding operations according to voice instructions. Headlights (Low Beam): Headlights are the most basic lights of a vehicle. They must be turned on when driving at night. In urban areas, low beams are generally used, and high beams can only be activated after turning on the headlights. Rotate the knob or the top knob of the lever to the corresponding icon position to turn on the headlights. High Beam: High beams are designed for roads with poor lighting conditions. They should not be used during oncoming traffic or when streetlights provide sufficient illumination. Typically, push the lever on the left side of the steering wheel forward to activate high beams, while some older vehicles require pulling the lever towards the driver. Parking Lights: Parking lights, also known as running lights, help others see the outline of the vehicle. Nowadays, they also serve decorative purposes. Their brightness is lower than headlights. They should be turned on during rain, dim lighting, or in underground parking lots. Find the corresponding icon on the knob/lever and rotate it to the icon position to turn them on.

14

4

Share

What is the seating arrangement for business vehicles?

Business vehicle seating arrangement is as follows: front passenger seat, rear right seat, rear left seat, rear middle seat, middle right seat, middle left seat. Pre-departure inspection: Before setting off each day, conduct a comprehensive vehicle inspection including checking for oil or water leaks, measuring tire pressure to ensure it's appropriate, inspecting the engine oil condition to verify its color is normal and the oil level is correct. Safe driving: Properly use seat belts, which provide protection no less than airbags during severe collisions. Avoid fatigue driving and take breaks every 2 hours. Traffic rule compliance: Especially on highways, do not speed. Speeding may not only result in traffic police penalties but more importantly, it's unsafe.

5

2

Share

What Causes a Burning Smell in the Engine Compartment?

The causes of a burning smell in the engine compartment are as follows: Incomplete Gasoline Combustion: When starting the car in winter, the low temperature makes it harder for gasoline to atomize, affecting combustion. Some unburned gasoline molecules are expelled through the exhaust pipe and then enter the cabin via the external air circulation system. Brake Pad Friction: If the handbrake is not fully released, the brake pads will continuously rub while driving, producing a metallic burning smell. Alternatively, if the brake pads contain larger metal particles, a brief burning odor may occur as these particles wear down. Clutch Plate Malfunction: Slipping clutch plates in the transmission can generate high temperatures, leading to a burning smell. For example, when accelerating uphill with the clutch partially engaged (not fully lifted), the clutch plate and flywheel rapidly rub against each other, producing a scorched odor. Prolonged partial engagement with high throttle can easily cause the clutch plate to burn out.

2

1

Share

What is the official fuel consumption of the Jianghuai Sehol X8 in liters?

The official fuel consumption of the Jianghuai Sehol X8 is 7.2L/100km. Below is a related introduction to the Jianghuai Sehol X8: 1. Exterior: The vehicle adopts a brand-new family design style, with an enlarged grille featuring vertical waterfall-style elements inside, offering a very advanced visual experience and a strong sense of three-dimensionality. It also incorporates the currently most popular body lighting. 2. Space: The Sehol X8 is positioned as a mid-to-large SUV and is currently the top model in the Jiayue family. The new car's dimensions are 4795/1870/1758mm in length/width/height, with a wheelbase of 2810mm.

4

3

Share

What Causes Gear Sticking in Motorcycles?

Motorcycle gear sticking during shifting is caused by incomplete clutch disengagement, which can be resolved by adjusting the clutch. Cleaning the clutch: When oil stains or rust are present on the clutch friction plates, driving plates, or pressure plates, they should be disassembled for removal of contaminants or rust, cleaned thoroughly with gasoline or kerosene, dried, and then reinstalled. Applying appropriate grease: After cleaning or replacing the clutch bearing, apply an appropriate amount of grease, ensuring the side with the dust cover faces the clutch. Incorrect installation must be avoided to prevent oil contamination from entering the clutch, which could cause clutch slippage. Regular adjustment: Regularly adjust the clutch operating mechanism, remove any dirt, tighten all connecting bolts, and lubricate the clutch pedal shaft as specified.

7

2

Share

Do I Need to Retake Subject One When Switching from Manual to Automatic?

Switching from manual to automatic does not require retaking Subject One, but you need to resubmit the application form and medical examination certificate. Passing score for Subject One: The total time for the Subject One test is 45 minutes. The test paper consists of 100 questions, including true/false and single-choice questions, with a full score of 100 points and a passing score of 90. The test paper is randomly selected and combined by the computer driver's license examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Specifications". Examination process: Follow the arrangement of the staff and receive your driving school file in order in the waiting room; Carry and present your ID card for inspection by the supervising police officer; Mobile phones must be turned off when entering the examination area; No loud noise is allowed in the examination area; Regulation textbooks are not allowed to be brought into the examination room (or placed in the bag); After the test, keep your ID card safely and submit the file to the "Submission Window" at the front of the examination room; Candidates who pass the test will sign under the guidance of the staff at the exit of the examination room and then leave; Candidates who fail the test can leave the examination room and wait for the driving school staff to notify them of the retake time.

4

1

Share

How long after new car registration can the filing be completed?

Has the Night Driving Test for Class C Driver's License Been Cancelled?

What is the seating arrangement for business vehicles?

What Causes a Burning Smell in the Engine Compartment?

What is the official fuel consumption of the Jianghuai Sehol X8 in liters?

What Causes Gear Sticking in Motorcycles?

Do I Need to Retake Subject One When Switching from Manual to Automatic?

Can a new car be registered in a different province?

Why is the small motorcycle engine making noise?

What Causes a Motorcycle's Warning Light to Keep Flashing?

Is Dual Clutch Gear-Driven?