···
Log in / Register

How long after getting a driver's license can you drive on the highway?

4 Answers
LaEsther
07/29/25 9:54am
You can drive on the highway one year after obtaining your license. Relevant information is as follows: 1. Specific explanation: If accompanied by a driver who has held a corresponding or higher-class driver's license for more than three years, you can enter the highway immediately after obtaining your license. Violating this regulation and entering the highway without authorization may result in a fine ranging from 20 to 200 yuan for the driver. 2. Regulations: Legal basis: Article 75 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" states that a driver in the probationary period driving a motor vehicle on the highway must be accompanied by a driver who has held a corresponding or higher-class driver's license for more than three years. Among them, driving a small automatic transmission passenger vehicle for the disabled can be accompanied by a driver who holds a small automatic transmission passenger vehicle or higher-class driver's license. During the probationary period after adding a driving class, driving a motor vehicle of the original driving class is not subject to the above restrictions.
Was this review help?
20
0
Share
CharlotteDella
08/13/25 11:58am
When I first got my driver's license, I was super excited to try the highway, but the law clearly states that during the one-year probationary period, you can't drive alone on highways. Back then, I found out that you must have an experienced driver who's held the same license for over three years accompanying you. I remember my first time driving on the highway with a friend—as soon as the speed picked up, my hands were shaking, and I almost messed up the lane change. After the probationary period ended, about a year later, I could drive freely by myself. Actually, this rule makes sense—highway speeds are fast with higher risks, and new drivers tend to panic, like reacting slowly during turns or in heavy traffic. I'd advise new drivers not to rush; first, get more practice driving in the city to get familiar with vehicle control, then wait until they've gained enough experience after a year before tackling the highway alone—it's safer and more reassuring.
Was this review help?
16
1
Share
Expand All
LaJanelle
10/06/25 8:29am
After driving for so many years, I always remind newly licensed friends not to rush onto the highway. Regulations require that during the probationary period of one full year, an experienced driver must accompany them, and the accompanying driver must have held the same type of license for over three years. Highways are not like city roads—speeds are higher, following distances are shorter, and beginners are prone to mistakes, such as sudden braking or changing lanes into blind spots. It's best to drive alone only after the probationary period. I suggest you first practice in the city, get used to road conditions, and drive a few thousand kilometers before considering highways. Safety comes first; you'll regret it deeply if an accident happens.
Was this review help?
19
3
Share
Expand All
JoyAnn
11/20/25 3:09am
Simply put, there is a one-year probation period after obtaining a new driver's license. During this time, driving on highways requires the accompaniment of another person who has held a driver's license for more than three years. After one year, the probation ends, and you're free to drive alone. I understand this is necessary for the protection of new drivers, as highway conditions are complex and prone to mistakes. Don't try to cut corners and violate the rules; just wait until the time is up.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

Where is the fuel tank cap switch on the Bora?

The Bora's fuel tank cap does not have an independent locking switch. When the car doors are locked, the fuel tank cap is also locked; when the doors are unlocked, the fuel tank cap opens. More information about the Bora is as follows: 1. The Bora uses two types of engines, one is a 1.4-liter turbocharged engine, and the other is a 1.5-liter naturally aspirated engine. 2. The Bora has a wheelbase of 2614 mm, with length, width, and height dimensions of 4562 mm, 1793 mm, and 1468 mm respectively. 5. The front suspension of the Bora uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
16
1
Share

How to Adjust the Time on the Teana Dashboard?

The method to adjust the time on the Teana dashboard is as follows: 1. Turn on the power, the CLK button displays the time and settings. 2. Press and hold the CLK button for about 5 seconds until the time display starts flashing, then use the adjustment buttons (left turn to decrease, right turn to increase). 3. Press the hour/minute selection button. 4. After adjusting the time, press CLK again to confirm. 5. If no action is taken for a few seconds, it will exit the adjustment mode. More information about the Teana: 1. The 2020 Teana retains the design of the current model in terms of appearance. The front face features the latest V-motion design, with sharp-angled headlight clusters on both sides, paired with a trapezoidal air intake below and a shovel-shaped front lip design beneath the fog lights, giving the otherwise understated Teana a more aggressive look on this model. 2. The 2020 Teana measures 4901mm in length, 1850mm in width, and 1447mm in height, with a wheelbase of 2825mm.
6
1
Share

Which country produces Maybach?

Maybach is a German automobile brand. More information about Maybach is as follows: 1. The new Maybach Zeppelin is equipped with a Mercedes-AMG improved 6.0-liter V12 twin-turbocharged engine, with an output power of up to 471 kW/640 horsepower and a torque of 1000 N·m, giving the Maybach Zeppelin unprecedented power performance. 2. The new Maybach Zeppelin can be equipped with the world's first intelligent in-car fragrance system. With just a touch of a button, you can enjoy a delightful sensory journey. Owners can add their favorite fragrance to the Zeppelin's specially designed intelligent fragrance bottle. With the activation of the control system, the carefully crafted personalized fragrance instantly fills the car.
19
5
Share

How Many Cylinders Does the BMW 328 Engine Have?

BMW 328 is equipped with a four-cylinder engine. More details about the BMW 328 are as follows: 1. The BMW 328 is a mid-size car launched by BMW, mainly introduced to the Chinese automotive market through imports. 2. In terms of power, this model offers one powertrain option, featuring a 2.0T inline four-cylinder engine. This engine delivers a maximum power of 180 kW and a maximum torque of 350 Nm. For the transmission system, it is paired with an 8-speed automatic manual transmission. 3. The four-cylinder engine mainly consists of components such as the cylinder block, crankcase, cylinder head, and cylinder gasket. The four-cylinder engine performs more stably during operation.
13
0
Share

What are the techniques for driving straight into a parking space?

Techniques for driving straight into a parking space include: 1. Before entering the space, try to stay as far away from the parking space side and as close to the opposite side of the road as possible; 2. Turn the steering wheel to the left to angle the car body. If the road is wide, you can turn the steering wheel to the left a bit earlier. If the road is narrow, turn the steering wheel to the left a bit later; 3. During the process of entering the space, adjust the direction in time based on the reference points in front, and don't wait until after parking to check if the car is centered. It is not recommended to drive straight into a parking space because during the process of reversing out of the parking space, the driver cannot see the traffic situation on both sides of the parking space entrance. Reversing out directly without confirming safety not only affects others' passage but may even cause traffic accidents.
20
1
Share

How to Check Tire Wear?

Methods to check tire wear: Observe whether there is abnormal uneven wear on the tire tread or use a ruler to measure the depth of each tread groove to see if they are similar; Check if there is abnormal feather-like wear on the tread; Inspect each tread block for signs of chamfering (uneven tread blocks, missing corners, or front-high and rear-low conditions). Feel the tread surface with your hand to check for unevenness (step differences), and examine whether the tread ribs on both sides of the longitudinal grooves are of the same height. Sawtooth wear on the tread: This is caused by improper front wheel alignment, displacement of the front suspension system, or loose ball joints. Normal rolling wheels producing slippage or constantly changing wheel alignment during driving can also cause sawtooth wear on the tires.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.