How long after drinking a small sip of red wine can you drive?

What to Learn in Subject 2?

Subject 2 requires mastering the basic driving operation essentials and having the fundamental ability to control the vehicle. It involves proficiently learning the basic methods of driving on the field and internal roads, acquiring the capability to reasonably use vehicle control components and correctly control the spatial position of the vehicle movement. This includes accurately controlling the vehicle's driving position, speed, and route. Below is the relevant information for Subject 2: Typically, it takes about one month to learn Subject 2. Here are the details: 1. Introduction: Subject 2, also known as the field driving skill test, includes five mandatory test items for small cars C1 and C2: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). Some regions may include a sixth item, such as high-speed card collection. 2. Tips for automatic transmission Subject 2 test: Carefully control the accelerator and brake. Use the brake when deceleration is needed and the accelerator for acceleration, ensuring not to press either too abruptly. It is advisable to maintain a slow speed throughout for safety. During slope starts, be cautious to prevent the vehicle from rolling back; gradually release the brake only when you feel the vehicle has enough power to climb the slope.

4

Share

Can You Park on the Highway?

Generally not allowed. If you must stop, you should pull over to the side, place a triangular warning sign behind the vehicle, and turn on the hazard lights. You can park in the emergency lane beside the highway, but you must place a warning sign 50 meters behind the vehicle to alert other drivers that there is an emergency stop ahead. Here is more related information: Penalties for parking on the highway: 1. According to Article 68 of the "Road Traffic Safety Law of the People's Republic of China": When a motor vehicle breaks down on the highway, the relevant provisions of Article 52 of this Law shall be followed; however, the warning sign should be placed at least 150 meters behind the vehicle in the direction of oncoming traffic. Passengers should quickly move to the right shoulder or emergency lane and call the police immediately. If a motor vehicle on the highway breaks down or is involved in a traffic accident and cannot be driven normally, it should be towed or pulled by a rescue vehicle or a tow truck. 2. The emergency lane is reserved for temporary parking in emergencies, waiting for rescue, or dealing with traffic interruptions caused by accidents or other emergencies. It plays a vital role in rescuing the injured, quickly handling accident scenes, and ensuring timely restoration of traffic flow, making it the "lifeline" of the highway.

18

5

Share

What Are the Hazards of Replacing the Radiator Frame?

Radiator frames are considered wear-and-tear parts, and replacing them is quite normal without any hazards, as long as the installation is standardized and ensures they do not come loose. Essentially, the radiator frame is a large bracket fixed to the frontmost part of the two front beams, supporting components such as the radiator, condenser, and headlights. Below are some related details: 1. Material: There are three types of radiator frame materials available on the market—plastic, iron, or alloy. Structurally, they can be divided into one-piece and split types. The one-piece type is the most common form in the market, and in some regions, the radiator frame is also referred to as a "dragon gate frame." The split type is generally divided into three sections, connected via bolts or welding points. 2. Inspection: To determine whether a radiator frame has been replaced, you can check the following aspects: whether there is deformation, rust, or signs of disassembly; whether it bears the original manufacturer's markings; whether the installation holes or positioning holes are deformed; and whether there are any fractures, cuts, or re-welding marks.

8

2

Share

What does the S gear in Jetta mean?

S gear is the sport mode of a car. The following is an introduction to the gears of an automatic transmission: 1. P gear: This is the parking gear and starting gear. When this gear is engaged, the parking lock mechanism locks the transmission output shaft. 2. R gear: This is the reverse gear. When this gear is engaged, the reverse gear hydraulic circuit of the hydraulic system is connected, causing the drive wheels to rotate in reverse for backward movement. When the vehicle is not completely stopped, do not forcibly shift to the "R" gear, as this may damage the transmission. 3. N gear: This is the neutral gear. When the neutral gear is engaged, the planetary gear system idles and cannot output power. 4. D gear: This is the drive gear, also known as the forward gear. When the gear shift lever is in this position, the hydraulic system control device will automatically connect the corresponding forward gear hydraulic circuit based on the throttle opening signal and vehicle speed signal. It can automatically shift up or down according to the driving speed, achieving the automatic transmission function. 5. S gear: This is the sport mode. When the gear shift lever is in this position, the transmission control module receives the driver's command, and the vehicle enters sport mode. The shifting logic becomes more aggressive, and shifting occurs more frequently, providing the driver with a better sense of control and throttle response. This mode can showcase the driving pleasure of the vehicle.

18

2

Share

Can Shanghai License Plates Be Used on New Energy Vehicles?

Shanghai license plates can be used on new energy vehicles. Here are the relevant details: 1. Shanghai New Energy License Plates: Shanghai's new energy license plates are scrapped along with the vehicle. When a consumer purchases a new energy vehicle for non-commercial use and does not have any other new energy vehicles registered in Shanghai, the city continues to issue free special license plate quotas for new energy vehicles under the principle of controlling the total number of non-commercial passenger vehicles. 2. One Vehicle, One Plate Policy: For new energy vehicles using special license plate quotas, a one-vehicle, one-plate policy is implemented. If a new energy vehicle is scrapped, or undergoes out-of-jurisdiction transfer, registration changes, deregistration, or theft procedures, the special license plate quota is automatically voided. No quota certificate will be reissued, and the quota cannot be transferred within three years.

10

0

Share

What are the requirements for the Subject 3 driving test?

Subject 3 driving test requirements include carrying identification documents such as ID card, vehicle preparation, nighttime driving light test, starting, driving straight through intersections, gear shifting operations, passing bus stops, crossing pedestrian crosswalks, passing school zones, changing lanes, making U-turns, and parking by the roadside. Below are relevant introductions: 1. Adjusting test mentality: Learn to appropriately self-adjust, maintain a calm mindset to cope with the test, neither arrogant nor impatient, preventing nervousness from affecting the test. 2. On-site practice at the test location: Before the test, candidates can practice driving at the actual test site, which helps them understand the test environment, familiarize themselves with the venue, and reduce nervousness during the test.

20

0

Share

How long after drinking a small sip of red wine can you drive?

What to Learn in Subject 2?

Can You Park on the Highway?

What Are the Hazards of Replacing the Radiator Frame?

What does the S gear in Jetta mean?

Can Shanghai License Plates Be Used on New Energy Vehicles?

What are the requirements for the Subject 3 driving test?

Does Dark Window Tinting Affect Night Driving?

What causes the brake shoe wear alarm on the FAW J6?

What is Twin-Scroll Turbo?

What's the matter with hearing a bang while driving?