How long after drinking a 330ml beer can you drive?

1 Answers
JesseRose
07/24/25 3:47pm
It takes 8 to 12 hours to drive after drinking a 330ml beer, because studies have shown that drinking a beer can detect a blood alcohol content of about 40mg to 60mg, which is an illegal act of drunk driving. The human body's ability to metabolize alcohol is limited, generally only 10 to 15 milliliters of alcohol can be metabolized per hour, so under normal circumstances, it takes about 8 to 12 hours for the alcohol in a beer to completely dissipate and return to a normal state. Methods to quickly reduce alcohol content in the body are as follows: 1. Take a shower: After drinking, you can take a hot shower to promote blood circulation, which helps metabolize the alcohol content in the body. 2. Exercise: If the alcohol content is not very high, you can promote blood circulation through exercise, which can also quickly reduce alcohol content. However, if you are too drunk or dizzy, this method is not suitable. 3. Drink more water: You can drink more water, or drink some milk and honey, which can effectively sober up.
Was this review help?
14
2
Share
More Forum Discussions

What is the reason for the thumping sound when the car is running?

The reason for the thumping sound when the car is running is: If the sound changes with the vehicle speed and has a periodic rhythm, it is likely caused by abnormal noises from rotating components such as wheels or the drive shaft. It is important to thoroughly inspect the wheels, drive shaft, and other rotating parts for any abnormalities and to check if there is any interference with surrounding fixed components. The drive shaft is a high-speed rotating body with minimal support, so its dynamic balance is crucial. Typically, drive shafts undergo dynamic balance testing before leaving the factory and are adjusted on a balancing machine. For front-engine, rear-wheel-drive vehicles, the drive shaft transmits the rotation from the transmission to the differential. It can consist of multiple sections connected by universal joints.
13
0
Share

What are the color options for the Mazda CX-4?

Mazda CX-4 offers six color choices: Phantom Silver, Soul Red Crystal, Pearl White, Deep Crystal Blue, Brown, and Starry Blue. Below is an introduction to the Mazda CX-4: 1. In terms of configuration, the new CX-4 has undergone certain upgrades. The central control LCD screen has been increased from 7 inches to 8 inches, high-end models are equipped with BOSE audio, the i-ACTIVSENSE intelligent safety system adds 360-degree panoramic video monitoring, AEB pedestrian detection, and the new MZDCONNECT Mazda Connect system integrated with smart connectivity. 2. In terms of power, the new CX-4 still comes with 2.0L/2.5L engines, with maximum power outputs of 116kW (158PS) and 141kW (192PS) respectively, and peak torques of 202N.m and 252N.m, paired with a 6AT transmission, meeting the China VI emission standards.
7
3
Share

Can the Mercedes-Benz smart be driven on highways?

In China, the Mercedes-Benz smart can be driven on highways. Here is some introduction to one of the smart models: 1. Exterior. The smart Flame Orange Limited Edition features a two-tone body color combining orange and black, giving it a more striking visual impact compared to the standard smart model. Additionally, the Flame Orange Limited Edition is equipped with smoked headlights, black mirror covers, and an emblem with the "Flame Orange" inscription. 2. Interior. The smart Flame Orange Limited Edition comes with all-black seats made of soft sheep leather and fabric, with orange stripes in the middle of the seats. The steering wheel is a three-spoke design, and paddle shifters are included for the first time on a smart model. Moreover, the gear shift lever is wrapped in black soft sheep leather, and the combination of black seats and the three-spoke steering wheel gives a highly dynamic feel, exuding a strong sporty atmosphere inside the car. 3. Powertrain. The smart Flame Orange Limited Edition is powered by a 1.0-liter naturally aspirated engine and a turbocharged engine, with maximum power outputs of 70 horsepower and 84 horsepower, respectively, and peak torques of 92 N·m and 120 N·m. All models are paired with a 5-speed AMT transmission.
19
4
Share

Which country is Porsche from?

Porsche originates from Germany. Here is some introduction to the Porsche Macan: 1. Exterior. The Macan uses the chassis of the Audi Q5, comes standard with Michelin tires, and features Porsche's signature front grille. Its unique hatchback design fundamentally differs from the Q5. 2. Powertrain. The entry-level Macan is equipped with a 2.0-liter inline four-cylinder turbocharged engine, delivering a maximum power of 173 kW. The mid-range configuration features a 3.0L V6 twin-turbocharged engine with a maximum power of 250 kW. The flagship model is powered by a 3.6L V6 twin-turbocharged engine, producing a maximum power of 294 kW.
2
3
Share

Does the Buick Excelle have a reverse radar?

Buick Excelle mid-to-high trim models are equipped with reverse radars, which are installed on the rear bumper with a total of four sensors. The reverse radar, also known as "reverse collision radar" or "parking assist device," mainly consists of ultrasonic sensors, a controller, and a display. Below is relevant information about the reverse radar: 1. The automotive reverse radar primarily consists of a display, controller, and ultrasonic sensors. The controller processes signals, calculates the position and distance between obstacles and the vehicle body. The ultrasonic sensors mainly function to emit and receive ultrasonic signals, inputting signals into the main unit, which are then displayed on the screen. 2. The automotive reverse radar, also called reverse collision radar, is a safety assist device that functions during reversing, notifying the driver of surrounding obstacles through sound or display. It addresses the driver's difficulties in detecting obstacles while reversing, parking, or starting the vehicle, helping to eliminate blind spots and unclear vision. Utilizing the principle of ultrasound, the rear sensors send ultrasonic waves to detect obstacles and their distances, providing alerts to the driver.
10
0
Share

Where is the crankshaft position sensor located on the Nissan Qashqai?

The crankshaft sensor of the Nissan Qashqai is located at the junction between the transmission and the engine. The crankshaft sensor is one of the most important sensors in the engine's electronic control system, providing signals for ignition timing and confirming crankshaft position, used to detect piston top dead center, crankshaft angle, and engine speed. Below are the detection methods for the crankshaft position sensor: 1. Resistance detection of the crankshaft position sensor: Unplug its wiring connector and use a multimeter to measure the resistance between each terminal of the sensor. The readings should comply with the specifications in the attached table; otherwise, replacement is required. 2. Output signal detection of the crankshaft position sensor: Unplug the wiring connector of the crankshaft position sensor. When the engine is turned, there should be pulse signal outputs between the G1-, G2-, and G- terminals. If there is no pulse signal output, replacement is necessary. 3. Gap detection between the sensor coil and the signal rotor: Use a feeler gauge to check the air gap between the signal rotor and the protrusion of the sensor coil. The gap should be 0.2~0.4mm. If the gap does not meet the requirements, replacement is needed.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.