How long after crystal coating can the car be exposed to water?

1 Answers
OKeegan
07/29/25 9:27pm
After crystal coating, the car should not be exposed to water for more than 24 hours, and it should not be washed until a week later. Crystal coating for cars provides a reliable paint sealing technology that efficiently and durably protects the car paint, preventing environmental impacts on the paint color. It effectively resists common chemical corrosion and minor scratches in daily life. Advantages of crystal coating for cars: Scratch resistance: The hardness of diamond crystal reaches 6H, compared to the 2H hardness of ordinary car paint, it can prevent most minor scratches. It also has an elastic recovery function, protecting the vehicle from daily minor scratches and reducing paint scratches by more than 70% compared to ordinary coatings. When external force exceeds the elastic protection range of the crystal, it usually only leaves a scratch on the crystal without damaging the paint. Corrosion resistance: The ultra-fine nano-crystal layer of diamond crystal isolates the paint from the external environment, effectively preventing oxidation and resisting corrosion from bird droppings, insect residues, acid rain, etc. No cracking: Diamond crystal resists UV rays, high temperatures, and extreme cold, with a temperature resistance range from -50°C to 300°C. It adapts to a wide range of temperature changes without cracking or peeling.
Was this review help?
13
0
Share
More Forum Discussions

What does the Audi quattro logo mean?

Audi quattro refers to Audi's permanent all-wheel drive technology. Here are the relevant details: 1. Permanent all-wheel drive: In the drivetrain system of a permanent all-wheel drive vehicle, a center differential is installed to distribute power to the front and rear drive axles. Unlike part-time four-wheel drive or on-demand four-wheel drive, permanent all-wheel drive vehicles maintain four-wheel drive at all times during operation. Depending on road conditions, the center differential allocates engine power to the front and rear wheels in a certain proportion. 2. Precautions: When towing the vehicle on a dolly, only the front wheels should be secured, while the rear two wheels continue to roll freely. In this situation, the multi-plate clutch rapidly increases its engagement level, causing the towed vehicle's rear wheels to transmit kinetic energy to the center differential. The center differential will generate significant heat due to reverse friction, ultimately leading to burnout. Therefore, permanent all-wheel drive vehicles should not be towed.
3
2
Share

Why does the steering wheel shake at 120 km/h after changing new tires?

This situation is most commonly caused by issues with the car tires. When the mass distribution of various parts of the tire is uneven, it can lead to dynamic imbalance when the wheels rotate at high speeds, resulting in severe steering wheel vibration during driving. In this case, it's necessary to perform a four-wheel alignment and dynamic balancing on the car tires. Here are the solutions: 1. Check if the tread is cracked. Aged tire rubber hardens and cracks, indicating the tire has reached its replacement limit, with reduced grip and increased risk of rupture due to external impacts while driving. 2. Check if the tread is cut or punctured by nails. These can cause air leaks and eventual tire blowouts, posing safety hazards if not detected in time. 3. After a tire impact, promptly check for bulges on the tread. A bulge indicates broken sidewall cords, signaling potential imminent tire failure. 4. Visit a tire repair shop to use a tire balancing machine to identify imbalance points and determine appropriate counterweights. It's best to balance all four tires together, or at least the two front tires.
20
5
Share

Can vehicle demerit points be handled online?

Both demerit points and fines can be processed online, but demerit points can only be deducted from your own license. If you want to use someone else's driver's license to deduct points, you still need to go to the traffic police station. Here is the relevant information: 1. The scope of online traffic violation fines includes: violations recorded on traffic cards; paper fines issued for driver traffic violations; non-on-site violations of locally licensed vehicles (applicable to summary procedures), where the parties have no objections, can be processed and paid through electronic banking. 2. Notes: Violations that require demerit points cannot be paid online. Violations that can be paid online do not require demerit points. After paying the violation fine, the violation record will be unlocked and cleared within 24 hours. According to current regulations, paper fines need to be paid at the bank where the violation occurred. Late payments will incur late fees.
16
4
Share

At What Speed Should You Shift Gears?

Manual transmission vehicles have forward gears ranging from 1st to 6th, with each gear representing the following speed ranges: 1. 1st gear: This is the starting gear, suitable for speeds between 0~15 km/h. It must be used when going uphill or downhill to regulate speed using the engine's traction. 2. 2nd gear: Suitable for speeds between 10-25 km/h. 3. 3rd gear: Suitable for speeds between 20-45 km/h. 4. 4th gear: Suitable for speeds between 40-60 km/h. 5. 5th gear: Suitable for speeds between 55-90 km/h. 6. 6th gear: Suitable for speeds above 90 km/h. Drivers should change gears promptly based on their vehicle's speed.
16
1
Share

Can a person who is 1.45 meters tall get a driver's license?

1.45 meters tall, can get a driver's license. The driver's license test only has height restrictions for large buses, tractors, city buses, medium buses, large trucks, and trolleybuses. There are no height restrictions for other vehicle types. The Ministry of Public Security of the People's Republic of China Order No. 139 "Decision of the Ministry of Public Security on Amending the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses'" has been passed by the executive meeting of the Minister of Public Security and is hereby promulgated, effective from April 1, 2016. Notes: Applicants for a motor vehicle driver's license shall meet the following requirements: Height: Applicants for large buses, tractors, city buses, large trucks, and trolleybuses must be at least 155 centimeters tall. Applicants for medium buses must be at least 150 centimeters tall.
10
3
Share

What causes the brake fault indicator light to illuminate in an Audi A6L?

Audi A6L brake system fault light illumination reasons are as follows: 1. Severe brake pad wear: Brake pads come in two types - with or without sensor wires. Those with sensor wires will automatically complete the circuit when worn to the limit, triggering the fault light. Brake pad replacement is required; 2. Low brake fluid level: Insufficient brake fluid will be accompanied by noticeably reduced braking power, and in severe cases may lead to complete brake failure. The warning light will illuminate in this situation. Simply replenish the brake fluid promptly; 3. Brake system oil leakage or false alarm: This directly affects the vehicle's technical performance, causing waste of lubricants and fuel, power loss, affects vehicle cleanliness, and creates environmental pollution. The fault light will illuminate, requiring replacement of gaskets or oil seals to resolve.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.