How long after canceling a car driver's license test appointment can you reschedule?

2 Answers
AndersonLynn
07/29/25 5:20am
After canceling a test appointment, the waiting period to reschedule varies for different subjects. For Subject One, you can reschedule anytime after cancellation. For Subject Two of the driving test, you can reschedule 10 working days after cancellation. Subject Three can generally be scheduled 10 to 20 days after passing Subject Two, but the exact timing depends on the number of local test takers and the regulations of the vehicle management office. Impact of canceling an appointment after scheduling: Canceling a scheduled appointment for a motor vehicle driver's license test within the specified number of times has no effect on the test itself. You can cancel your appointment with confidence. It's essential to schedule your motor vehicle driver's license test according to your own time to effectively complete the test items. Penalty for not attending a scheduled driver's license test: It will be treated as a failed test. After successfully scheduling an appointment for any subject of the motor vehicle driver's license test, failing to attend for any reason will result in a failed attempt for that subject. If you wish to reschedule the same subject, you must wait ten days before you can schedule it again. If you cannot attend the test, be sure to cancel your appointment promptly.
Was this review help?
10
4
Share
MacJoy
08/12/25 8:56am
When I canceled my subject two driving test appointment back then, the system needed some time to process it, usually just a day or two before I could reschedule. After the DMV app released new slots, new options would appear quickly, but during peak seasons, it might take around three days. It really depends on local regulations—some places are faster. Before canceling, I’d recommend checking your schedule to avoid wasting opportunities. Also, regular practice is key—don’t let scheduling issues delay your progress, as preparing for safe driving is what truly matters. In short, the wait isn’t long; just stay patient and it’ll work out.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Can You Continue Driving with Engine Trouble?

Not all engine failures mean you can't drive; it requires case-by-case analysis. Here's an introduction to the engine warning light: 1. If the engine warning light is on but there are no abnormal noises in the engine compartment, no other warning prompts on the dashboard, the vehicle's power is unaffected, and the transmission's upshifting is normal, you can continue driving to the 4S shop for further inspection. Issues like intake and exhaust can also trigger the engine warning light. 2. There are two scenarios when the engine warning light is on: (1) Yellow symbol light. This indicates there is a fault in the engine, but it does not affect the engine's normal operation, though maintenance is needed. (2) Red symbol light. This signifies a serious engine fault that normally requires immediate repair. In special road conditions, you may drive temporarily, but you must constantly monitor the engine's working condition.
7
3
Share

What car brand does the KIA logo represent?

KIA is the logo of Kia Motors. Kia's brand lineup includes models such as the Sportage, K3, Forte, and Pegas. Taking the Kia Sportage as an example: its exterior dimensions are 4460mm in length, 1850mm in width, and 1695mm in height, with a wheelbase of 2640mm. The body structure is a 5-door, 5-seat SUV. The Kia Sportage is equipped with a 1.4T turbocharged engine and a 2.0L naturally aspirated engine, with an L-type cylinder arrangement. It is paired with a 7-speed dual-clutch transmission and a 6-speed manual transmission. Its suspension system features a MacPherson strut front independent suspension and a multi-link rear independent suspension, with a front-wheel drive configuration.
9
1
Share

What is the engine speed at 80 mph?

The engine speed at 80 mph is between 1500 and 3000 RPM. Below is a comparison of vehicle speed and gear RPM, as well as an introduction to gear and RPM under different conditions: Comparison of vehicle speed and gear RPM: Starting in first gear, the engine speed is around 1000-1500 RPM; in second gear, the engine speed is around 1500-2000 RPM; in third gear, the engine speed is around 1500-2000 RPM; in fourth gear, the engine speed is around 1500-2000 RPM; in fifth gear, the engine speed is around 1500-3000 RPM. Gear and RPM under different conditions: When driving a manual transmission car, the gear should match the engine speed and driving speed. During high-speed cruising, the highest gear should be used to reduce the engine speed, which helps improve fuel economy. When overtaking, it is necessary to downshift in advance to increase the engine speed and wheel torque, which helps the driver overtake quickly.
9
5
Share

Reasons for Severe Vibration When Braking in D Gear

The reasons for vibration when braking in D gear are as follows: 1. After severe clutch wear, 'sliding friction' may occur when stopping in D gear; because wear reduces the friction between the two, and sliding friction can cause abnormal vibrations, rapidly increasing the clutch temperature. Therefore, stopping in D gear at relatively low temperatures may result in regular resonance or abnormal noises. 2. All torque converters can also wear out, and severe wear cannot rule out the possibility of abnormal slipping; coupled with wear or looseness of the power output shaft, or issues with the transmission gear bearings, irregular resonance when stopping in D gear is highly likely. 3. Carbon deposits can cause engine idle vibration. When in D gear, the engine needs to output power, and the RPM will be slightly higher than idle speed; however, if the throttle, intake and exhaust valves, spark plugs, or fuel injectors have severe carbon buildup, the air-fuel mixture and combustion efficiency at low RPMs will deteriorate.
7
2
Share

What does 'several liters of fuel consumption' mean?

It refers to the average fuel consumption of a vehicle per 100 kilometers traveled, measured in liters per 100 kilometers (L/100km). Below is an introduction to two fuel consumption evaluation metrics: 1. Constant-speed fuel consumption: This is a fuel economy indicator when a vehicle travels at a constant speed on a good road surface. Since constant-speed driving is a fundamental operating condition for vehicles on highways, and this type of fuel consumption is easy to measure, it is widely adopted. 2. Road cycle fuel consumption: This is a fuel economy indicator measured when a vehicle follows specified speed and time protocols for repeated cyclic driving on roads, also known as multi-condition road cycle fuel consumption. The speed and time protocols specify various driving conditions for each cycle, including gear shift timings, braking and stopping times, as well as driving speeds, acceleration, and braking deceleration values. Therefore, the fuel economy measured this way is closer to the actual driving conditions of the vehicle.
16
2
Share

How to Pass the Exhaust Emission Test During Annual Inspection?

Exhaust emission testing is a mandatory item during the annual inspection of vehicles. To pass the exhaust emission test during the annual inspection, regular maintenance of the three-way catalytic converter is essential. Use cleaning solvents, drip cleaning, or non-disassembly cleaning methods for the three-way catalytic converter. Some 4S shops offer this service. Before the test, try to use up the fuel in the tank and then refill with higher-grade fuel from a reputable gas station, as this can help with the emission test. If the vehicle has been used for a long time and shows signs of corrosion in the exhaust pipe, it is advisable to have it inspected and repaired promptly. If necessary, replace the exhaust pipe to improve the chances of passing the emission test. Severely corroded exhaust pipes usually make it difficult to pass the test. Nowadays, when purchasing vehicle insurance, insurance companies often provide inspection cards that assist with the annual inspection and exhaust emission testing, saving a lot of hassle. Dedicated channels can also help ensure a smooth emission test. Be sure to check with the insurance company if they assist with the emission test. Many vehicle owners lack confidence in their vehicle's condition and may attempt to pay someone to 'help' pass the emission test.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.