How long after buying a car can you get license plates?

2 Answers
Clarence
07/29/25 4:47am
The maximum time limit is 90 days, because the temporary license plate for a motor vehicle can be used for up to 90 days. Before the temporary license plate expires, you can choose the license plate for the motor vehicle. It should be noted that the purchase tax must be paid within 60 days from the date of the car purchase invoice. More relevant information is as follows: 1. One-time issuance: The temporary license plate for a motor vehicle can be issued at one time. After purchasing the vehicle and buying compulsory traffic insurance, you can obtain the temporary license plate at the 4S store, vehicle management office, or traffic management department of the public security authority. You can get three temporary license plates at once. Before the temporary license plate expires, you must register the vehicle to use it normally. 2. Types of temporary license plates: There are four types of temporary license plates for motor vehicles. The first is the temporary license plate within the administrative region, the second is the temporary license plate across administrative regions, the third is the temporary license plate for testing purposes, and the fourth is the temporary license plate for special motor vehicles.
Was this review help?
18
0
Share
LillianaDella
08/12/25 8:27am
Getting a license plate after buying a car can usually be done immediately. Last year when I bought a new car, the 4S dealership directly issued me a temporary license plate, allowing me to drive it home the same day. The formal license plate takes a few days to process at the vehicle management office, usually completed in about two or three days, as it requires preparing documents like the vehicle certification, invoice, and ID card copies. Temporary plates have a short validity period, so don’t delay too long. Remember to register at the vehicle management office right after buying the car, otherwise you might get fined on the road. Going on a weekday saves the most time, with shorter queues. The process is straightforward—just prepare the required documents, so don’t worry about delays.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What is the reason for one rear fog light being on and the other off?

The reason why one rear fog light is on and the other is off is that there is only one rear fog light. Reason for having one rear fog light: The main reason for having only one rear fog light is to distinguish it from the brake light. According to the EU ECE R38 regulation, if two rear fog lights are installed, they must be positioned at least 10cm away from the brake lights. Brake light introduction: Generally installed at the rear of the vehicle, the brake light has a red main body color to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the front vehicle is braking, even in low visibility conditions, thereby helping to prevent rear-end collisions. In simple vehicle models, power passes through a fuse to the brake switch. When the brake pedal is pressed, the switch connects, sending electricity to the two brake lights and one high-mounted brake light, which then completes the circuit through the negative line connected to the vehicle body. The function of the fog light is to make the vehicle visible to others in foggy or rainy conditions where visibility is significantly affected by the weather. The rear fog light is the fog light located at the rear of the car.
8
1
Share

Which button is the anti-skid function of the Magotan?

The anti-skid function of the Magotan is the ESP button, which is usually turned on by default. The role of ESP: During driving, the ESP system sensors will monitor the vehicle's status information in real time, including the driver's steering direction and angle, wheel speed, yaw angle, and roll rate. Once the ESP electronic control unit detects abnormal vehicle status, it will promptly intervene in the vehicle's auxiliary control system to adjust engine speed, wheel braking force, and steering wheel angle, correcting the vehicle's steering characteristics to prevent skidding. ESP intervention: When the vehicle experiences oversteering, ESP will also intervene in the vehicle's control mechanism, promptly acting on the outer front wheel to reduce the tendency of excessive turning and prevent the car from fishtailing. ESP not only works during excessive turning but also intervenes in the vehicle control system when understeering occurs, braking the inner rear wheel while reducing engine output torque, ensuring the vehicle's steering direction aligns with the driver's intentions.
16
4
Share

Why does the Civic tire pressure warning not alert after calibration?

The Civic's tire pressure system assumes the owner is aware of the tire pressure condition after calibration, so it stops reminding. It will resume alerts when significant deviations occur again. Below are specific details about the Civic: 1. The interior adopts an ST-Line style, featuring a 12.8-inch central control screen paired with a 10.1-inch LCD instrument panel. It is equipped with full-speed adaptive cruise control and active safety systems. 2. In terms of power, it is equipped with a 2.0T turbocharged engine with a maximum power of 180kw and a peak torque of 390Nm, mated to an 8-speed automatic or 8-speed manual-automatic transmission. There is also a 2.7T V6 turbocharged engine option with a maximum power of 237kw and a peak torque of 500Nm, paired with an 8-speed manual-automatic transmission.
2
4
Share

What is the difference between the two modes of CFMOTO 150NK?

The differences between the two modes of CFMOTO 150NK are as follows: Different speeds: The normal mode is slower, while the sport mode is faster. Different fuel consumption: The normal mode consumes less fuel, while the sport mode consumes more. Different horsepower outputs: The normal mode has lower horsepower output, while the sport mode has higher horsepower output, providing more power. Introduction to the two modes: The CFMOTO 150NK motorcycle has two riding modes: Sport mode and Economy mode. These modes can be switched using a red Mode button on the left handlebar switch. Pressing the MODE button activates the Sport mode, which is instantly displayed as SportMode on the instrument panel. The output in Sport mode is more direct, with a 10% increase in horsepower output compared to the normal mode. This configuration not only reduces fuel consumption but also allows riders to enjoy driving pleasure by simply switching modes. The principle involves altering the fuel supply curve of the electronic fuel injection system to control power performance.
12
0
Share

What does the blacklist record in Traffic Management 12123 mean?

Traffic Management 12123 user accounts will be included in the national "blacklist" database, restricting the handling of public security and traffic management services. Here are the specific details about Traffic Management 12123: 1. Overview: Traffic Management 12123 is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, supported by the Traffic Management Science Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for vehicle owners and drivers, including: personal user registration on the Internet service platform, appointment, acceptance, and processing of services such as motor vehicle/driver's license/illegal activity handling, traffic safety information inquiries, service notifications and reminders, service guidance, and road traffic services. 2. Features: Handling of illegal activities recorded by electronic monitoring devices, appointment for motor vehicle driver exams, pre-selection of new vehicle license plates, replacement and reissuance of motor vehicle driving licenses, license plates, and driver's licenses, reissuance of motor vehicle safety technical inspection qualification marks, extension of driver's license renewal, extension of review, extension of submission of physical condition certificates, inquiries and notifications about motor vehicle and driver's license-related information, navigation to traffic management service locations, and the newly added online self-service for handling traffic violations.
13
3
Share

What is the correct hand position for steering?

The correct hand positions for steering are as follows: Steering hand positions: When steering, your hands should alternate positions. When turning the steering wheel one full rotation, your left hand should turn halfway, followed immediately by your right hand continuing the turn. Safe hand positions: First, master the safer way to hold the steering wheel. Place your left hand near the 9 o'clock position and your right hand near the 3 o'clock position. Your hands should grip the wheel firmly but not too tightly. Your thumbs should rest naturally on the wheel. High-speed hand positions: When driving at high speeds (above 90 km/h), avoid making sudden movements with the steering wheel. Even slight adjustments can cause the car to veer, which can be dangerous. Make only minor adjustments to the steering wheel. Keep both hands firm but not overly tense. Incorrect hand positions: When steering, avoid using one hand to turn the wheel back and forth while resting the other hand on the gear shift. This is a bad habit that not only increases driving risks but can also damage the transmission. Always use both hands to steer the wheel.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.