How long after booking can I take the Subject 1 test?

3 Answers
MacEden
07/25/25 5:51am
You can take the Subject 1 test fifteen days after booking. The following are the precautions for the test: 1. Follow the staff's arrangements and collect your driving training file in order in the waiting area. 2. Bring and present your ID card for inspection by the supervising officer. 3. You must turn off your mobile phone when entering the test area. 4. No loud talking is allowed in the test area. 5. Textbooks or regulations are not allowed in the test area (or in your bag). 6. After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the test area. 7. Candidates who pass the test should sign under the guidance of the staff at the exit and then leave the test area. 8. Candidates who fail the test can leave the test area and wait for the driving school staff to notify them of the retake time.
Was this review help?
14
2
Share
KathrynDella
08/11/25 12:53pm
After completing Subject 1, when making an appointment, I learned that the exam can usually be scheduled within one or two weeks after booking, depending on the local test center's availability. For example, in my city, it might take about a week when there aren't many people, but during peak periods like winter or summer vacations, it could take two or three weeks. I used a driving test app to check the availability of popular test centers in advance, booking early to save time—don't delay and miss your chance. At the same time, I recommend starting to review the question bank immediately after booking because the time is just right—enough to go through the questions a few times and prepare for the exam, avoiding last-minute cramming and panic. Remember, the foundation of safe driving lies in this theoretical knowledge, so staying diligent is the way to go.
Was this review help?
11
1
Share
Expand All
LeConnor
09/27/25 5:02am
After booking the subject one test, I eagerly waited for the exam notice, which usually comes within a week, but the exact time depends on the test center and peak booking periods. At our driving school, it's common to wait 7-10 days, and during peak times, delays of over two weeks are normal. I checked the exam center APP schedule in advance and chose a session with fewer people to speed things up a bit. During this time, I steadily practiced questions, taking mock tests on the driving test app for an hour or two daily to build confidence. Don't stress too much about the exam; just make sure you're familiar with the material. After booking, confirm your status promptly to avoid missing out. Mastering the safety theory is super useful for your future driving.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What are the methods for parallel parking entry and exit?

First, you must understand parallel parking. After parking, there is a reference point at the rear of the car corresponding to the horizontal line of the parking space for operation. Exiting is simple: turn the steering wheel fully to the left, and when the left side of the car's front aligns with the roadside line ahead, straighten the wheel and proceed straight.
3
5
Share

Where is the air intake located on the Magotan?

It is located at the grille area. You can identify the intake system by spotting a thick tube connected to the engine (intake pipe) along with an air filter box, which then connects to the grille. The air intake utilizes forward motion to collect and channel air into the engine or ventilation system. Primary functions of automotive air intake: Air delivery: Supplies clean, dry, sufficient, and stable air to the engine to meet its operational requirements, preventing contaminants and large particulate matter from entering the combustion chamber, which could cause abnormal engine wear. Noise reduction: Another critical role of the intake system is to minimize noise and regulate airflow. Excessive noise not only affects the vehicle externally but also impacts cabin noise levels, significantly influencing ride comfort. The design quality of the intake system directly affects engine power output and acoustic performance, which correlates with overall vehicle comfort. Properly designed muffler components can reduce subsystem noise and enhance the vehicle's NVH (Noise, Vibration, and Harshness) performance.
4
5
Share

What does it mean when 6 warning lights are on in a Magotan?

There are many possible reasons for the engine warning light to come on in a Magotan. It could be due to wiring issues, sensor malfunctions, control module failures, poor fuel quality, unclean engine cylinders, or carbon deposits. It is recommended to visit a 4S shop or repair facility as soon as possible to inspect the relevant modules and components. Below is some relevant information: Notes: If other warning lights remain on, it is necessary to have the corresponding modules and components checked at a 4S shop or repair facility. If only the engine warning light is on, try restarting the vehicle and observe whether the light remains on. If the engine warning light turns off, there is no issue. However, if it stays on, the engine-related components and modules should be inspected at a 4S shop or repair facility. Magotan: The Volkswagen Magotan is closely related to the Passat B6, known as the Future B6, and is the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, "Mai" symbolizes confidence, decisiveness, and dynamism, while "Teng" represents soaring, surpassing, and passion.
10
2
Share

What are the reasons for the engine light to come on in a Mazda6?

The reasons for the engine light to come on in a Mazda6 are: 1. Damaged ignition coil or large spark plug gap; 2. Short circuit in the engine wiring; 3. Leakage in the ignition system; 4. Faulty oxygen sensor or failed catalytic converter; 5. Poor performance of the fuel pressure regulator or dirty fuel filter. The solutions for the engine light to come on in a Mazda6 are: 1. Open WDS for fault diagnosis; 2. Check the solenoid valve and wiring harness; 3. Repair the wiring harness and replace the PCM. Taking the 2015 Mazda6 as an example, its body dimensions are: length 4670mm, width 1780mm, height 1435mm, wheelbase 2675mm, and fuel tank capacity 64L. The 2015 Mazda6 is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 147PS, maximum power of 108kW, and maximum torque of 183Nm.
7
0
Share

What brand is the audio system in the Magotan 330 Luxury model?

The audio system in the Magotan 330 Luxury model is from the Dynaudio brand. Car audio systems are installed to alleviate the monotony of driving and traveling for both the driver and passengers. For music-loving car owners, listening to music while driving can be particularly enjoyable, but it's important to keep the volume at a reasonable level to avoid compromising driving safety. Here is some relevant information: Audio Brand: Initially, car audio systems started with AM radios, later evolving to AM/FM radios, cassette players, and then to CD players compatible with DCC and DAT digital audio. Today, car audio systems have reached high standards in sound quality, operation, and vibration resistance, capable of withstanding the bumps of rough roads while ensuring stable performance and perfect sound quality. Components of Car Audio Systems: Head Unit: The source of car audio. Head units include RADIO-only units, RADIO plus MP3 units, CD units, MP3 plus CD changers, CD plus navigation units, and CD/DVD/car MP5 units, DVD players, etc. Speakers: The sound-producing units of car audio systems, converting electrical energy into sound waves. These include tweeters, mid-range speakers, woofers, and subwoofers.
12
1
Share

How to Match the Tire Pressure Sensor for Buick LaCrosse?

Buick LaCrosse tire pressure sensor replacement and matching method is as follows: 1. With the vehicle ignition on, turn the left stalk on the steering wheel to select and enter the tire pressure display column. 2. Press the SET/CRL button on the left stalk (for about 2 to 3 seconds). 3. The onboard computer prompts for tire pressure monitoring relearning, select Yes (enter tire pressure monitoring relearning mode), (otherwise no learning). 4. The horn beeps twice, indicating that tire pressure monitoring relearning is in progress. (The onboard computer also displays: Tire pressure learning). 5. The vehicle's left turn auxiliary light stays on, and the left mirror turn signal stays on, indicating that the left front tire pressure relearning is in progress. At this time, increase (inflate) or decrease (deflate) the left front tire pressure for about 5 seconds (or +8KPa value). This completes the relearning process for the left front tire pressure monitoring, and the horn beeps to prompt entry into the tire pressure learning mode. 6. The horn beeps twice, and the turn signal stays on for about 3 seconds, indicating that the four-tire pressure monitoring relearning is complete.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.