How Long After a Car Body Paint Job Can You Wash the Car?

Should You Press the Clutch First When Braking in a Manual Transmission Car?

It is generally not recommended to press the clutch first when braking in a manual transmission car. The correct procedure is to press the brake first and then depress the clutch when the speed decreases to near stopping. This is to prevent the engine from stalling. In an emergency situation requiring an immediate stop, you should press both the clutch and brake simultaneously. In such cases, it's advisable to use intermittent braking (pumping the brakes), with higher and longer frequency being more effective in preventing the car from rolling over. If you don't press the clutch, the engine's reverse drag force may interfere with the normal operation of the ABS system, potentially affecting emergency avoidance maneuvers. This becomes even more dangerous on slippery roads. The consequence of only pressing the brake without the clutch is inevitable engine stall. Although the braking distance remains unchanged, there is still a risk of secondary accidents after coming to a stop.

16

1

Share

Where is the B-pillar located on a car body?

The B-pillar of a car body is the pillar located between the front door and the rear door; the A-pillar is the pillar located between the windshield and the left front door. Both the A-pillar and B-pillar are main components supporting the structural strength of the vehicle. In the upper part of the front and rear doors of the cockpit, there is a piece of car glass each, and the pillar between these two pieces of glass is the B-pillar. Generally, the B-pillar is vertical, and some additional parts, such as the front seat belts, are installed inside the B-pillar. Therefore, to better achieve force transmission, the B-pillar often bulges outward. Hence, the challenge with the B-pillar is to achieve a balance between stiffness and weight. If viewed from inside the cabin, the position of the front seat belts is where the B-pillar is located.

6

1

Share

Should a 125cc scooter use 92 or 95 octane fuel?

For a 125cc scooter, both 92 and 95 octane fuel are suitable. Reference for motorcycle fuel grade selection: For many small and medium-sized motorcycles, 92 octane fuel is commonly used. However, using 95 octane fuel can provide better acceleration performance. Compared with 92 octane fuel, it offers faster power response and causes less engine vibration. The difference between 92 and 95 octane fuel lies in their iso-octane content. Higher-grade gasoline has better anti-knock performance. 95 octane fuel is purer than 92 octane, releasing more kinetic energy during combustion in the engine. Therefore, higher-grade fuel demonstrates better fuel efficiency and longer range in terms of power delivery. Motorcycle refueling precautions: For motorcycles below 150CC, the engine oil capacity is mostly less than one liter. Never overfill the engine oil - the correct amount should be checked using the oil dipstick or observation window. Overfilling engine oil may cause engine overheating, oil leakage. Never fill the engine oil to maximum capacity. Do not arbitrarily switch fuel grades. If you switch to a lower grade fuel, it may cause premature combustion and engine knocking.

20

0

Share

What are the penalties for driving a vehicle with an expired temporary license plate?

If a vehicle is driven on the road with an expired temporary license plate, it is equivalent to "driving a motor vehicle on the road without displaying a motor vehicle license plate." The specific relevant details are as follows: 1. According to the "Road Traffic Safety Law," if a motor vehicle is driven on the road without displaying a license plate, the traffic management department of the public security organ shall detain the vehicle, notify the party to provide the corresponding license plate, and impose a fine of 200 yuan and deduct 12 points in accordance with Article 90. 2. The traffic management department reminds: Currently, the validity period of the temporary license plates issued for motor vehicles is 15 days. Drivers must pay attention to the expiration date marked on the back of the temporary license plate and avoid driving with an expired temporary license plate. The following are the solutions for an expired temporary license plate: 1. Continue to apply for a temporary license plate: A temporary license plate can be extended up to three times. 2. Use a formal license plate: This is possible only if a formal license plate has already been obtained. 3. Use a fourth temporary license plate: This is also a widely used method. If all three temporary license plates in the local area have expired, one can apply for a temporary license plate from another province or city.

7

4

Share

What does a light bulb-shaped warning light mean?

A warning light resembling a light bulb with an exclamation mark inside indicates a malfunction in the vehicle's lighting system. When this indicator illuminates, it signifies that an exterior bulb has failed. This could include issues such as a damaged brake light, or less noticeable lights like the license plate light, width marker light, or reverse light. Additionally, the light may also activate due to poor electrical connections in the lighting system. Below is relevant information about warning lights: Location of warning lights in the vehicle: Warning lights are typically located on the dashboard within the driver's compartment. Function of warning lights: Their purpose is to alert the driver when a system malfunction occurs during normal vehicle operation, prompting attention and repair at a designated service station. Types of warning lights: Engine warning light, airbag system warning light, ABS system warning light, and transmission control system warning light. Structural principle of warning lights: Composed of bulbs, self-diagnostic systems, and fault circuits, they can promptly identify the location of a malfunction when a system failure occurs, causing the warning light to illuminate.

8

3

Share

Can I appeal if I couldn't stop when the traffic light turned from green directly to red?

If you couldn't stop in time and ran through the intersection when the traffic light changed directly from green to red without a yellow light, you can apply for an appeal. According to the Road Traffic Safety Law, traffic signals must consist of red, yellow, and green lights. Red means stop, green means go, and yellow serves as a warning. Therefore, if you disagree with the traffic police's penalty, you can file an appeal. The decision depends on whether there was a yellow light: First scenario: If the traffic light had a yellow light but you failed to notice it flashing, or if the yellow light wasn't very visible during the day, you cannot appeal. These situations are not caused by the absence of a yellow light, so any appeal would likely be denied. Second scenario: If the traffic light had no yellow light—possibly due to a malfunction, obstruction, or other reasons that made it impossible to see the signal—and you were penalized for running a red light, you can appeal to the traffic police department. In such cases, the appeal is usually successful. Moreover, if the traffic light was indeed faulty, the traffic police department may already be aware of the issue and might not impose a penalty.

12

1

Share

How Long After a Car Body Paint Job Can You Wash the Car?

Should You Press the Clutch First When Braking in a Manual Transmission Car?

Where is the B-pillar located on a car body?

Should a 125cc scooter use 92 or 95 octane fuel?

What are the penalties for driving a vehicle with an expired temporary license plate?

What does a light bulb-shaped warning light mean?

Can I appeal if I couldn't stop when the traffic light turned from green directly to red?

Why is there water vapor inside the car?

Is it necessary to carry the driver's license with you?

Can You Still Drive with a Coolant Leak?

What does the term 'super license plate vehicle' mean?