How is the Song PLUS EV?

Why is the A4L reversing camera not switching?

The reason why the A4L reversing camera is not switching may be due to a faulty camera. You can check if the camera has power or try replacing it with a new one to resolve the issue. The reversing camera system provides clear visibility even at night through infrared. Professional vehicle-mounted probes have further improved anti-magnetic, anti-shock, waterproof, and dustproof performance. Below are specific details about the reversing camera: 1. Selection of reversing camera: (1) For use in sedans, consider the camera model (choose whether it is waterproof and has night vision function), screen size (3, 5, 7 inches), power supply voltage (12V). For large vehicles such as trucks and buses, 24V is sufficient. (2) For large vehicles, selection should be done carefully. The operating conditions of large vehicles differ significantly from those of sedans. For example: harsh driving environments on construction sites, extreme temperatures, high frequency of reverse gear usage, and long working hours. Large vehicles generally have a power supply voltage of 24V, so reversing cameras designed for sedans cannot be used. Therefore, when selecting a product, ensure you choose the right product, not based on price or other factors. 2. Considerations: When selecting a reversing camera, ensure it is compatible with your vehicle model. Factors to consider include camera model, power supply voltage, screen size, waterproofing, shock resistance, and anti-interference capabilities.

3

Share

Why was the Baojun RM5 discontinued?

The main reason for the discontinuation of the Baojun RM5 is that its engine had significant issues. In such a highly competitive market, the Baojun RM5 struggled to survive, and its sales fell far short of the expected targets, leading to the decision to halt production and sales to minimize losses. More details about the Baojun RM5 are as follows: 1. Introduction 1: The Baojun RM5 measures 4705 mm in length, 1806 mm in width, and 1625 mm in height, with a wheelbase of 2750 mm. It is an MPV model under the Baojun brand. The car offers a relatively spacious interior. The Baojun RM5 was launched in 2019 and is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. 2. Introduction 2: The 1.5-liter naturally aspirated engine produces 99 horsepower and a maximum torque of 143 Nm. This engine reaches its maximum power at 5800 rpm and its maximum torque between 3400 and 4400 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either a 6-speed manual transmission or a CVT. 3. Introduction 3: The 1.5-liter turbocharged engine delivers 147 horsepower and a maximum torque of 250 Nm. This engine achieves its maximum power at 5200 rpm and its maximum torque between 2200 and 3400 rpm. It also features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either a 6-speed manual transmission or a CVT. 4. Introduction 4: The front suspension of this car uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.

1

2

Share

What is the difference between Audi A7 and S7?

Audi A7 and S7 difference introduction: 1. Different curb weights: 1. Audi A7: Curb weight is 1645kg (2019 model). 2. Audi S7: Curb weight is 2050kg. 2. Different wheelbases: 1. Audi A7: The dynamic model has a wheelbase of 2934mm; the competition model has a wheelbase of 2928mm (2019 model). 2. Audi S7: The wheelbase is 2917mm. 3. Different features: 1. Audi A7: In terms of power, it is equipped with 2.8L and 3.0T V6 engines, with maximum power outputs of 220 horsepower and 310 horsepower respectively. The S7 is equipped with a 420 horsepower 4.0T V8 twin-turbocharged engine. 2. Audi S7: Thanks to the new "cylinder on demand" technology, the average fuel consumption per 100 kilometers is only 9.6 liters and 9.7 liters. The advanced chassis, lightweight body, and exquisite interior make the new Audi a perfect work in the sports car market. The S7 is developed based on the Audi A7, which is also the first generation of this car series.

9

3

Share

What Causes the Engine Malfunction Light to Illuminate in the Buick Excelle After Powering On?

The engine malfunction light in the Excelle may illuminate due to the following 7 main reasons: Sensor Failure: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the malfunction light. Fuel and Oil Quality Issues: Failure to use the fuel and oil as specified by the manufacturer may cause engine wear, leading to the malfunction light. Poor Combustion of Air-Fuel Mixture: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Issues such as spark plug failure, ignition coil failure, fuel pump failure, or clogged fuel lines can all cause poor combustion. Turbocharger Problems: The intake turbo piping or turbocharger can also trigger the engine malfunction light. The most common issue is turbocharger damage, accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake Issues: Problems with the car's intake system can lead to clogged engine pipes, and in severe cases, trigger the malfunction light. A dirty or uncleaned air filter can cause intake problems. Exhaust Issues: Exhaust system faults can also cause the engine malfunction light to illuminate. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing faults, with the catalytic converter being the most frequent problem. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system failures can all lead to catalytic converter issues. Anti-Theft System Fault: If the car's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, and the malfunction light will illuminate. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally, looking for signs like shaking or black smoke. If present, avoid restarting the engine. Note: Do not restart the engine if the red light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the "on" position without depressing the clutch. The car will perform a self-check after powering on. Wait 5-10 seconds to see if the malfunction light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.

1

0

Share

Why does the H9 have such a bad reputation?

In fact, the early reputation of the Haval H9 was indeed unsatisfactory. Before 2017, the biggest issue with the Haval H9 was that the engine tended to burn oil. Additionally, the third-row space of the Haval H9 could only be used for emergencies, as the legroom was not spacious enough, and the seat cushion design was relatively thin, resulting in poor comfort. The common problems of the Haval H9 are introduced as follows: 1. Transmission jerking: This issue also appeared in some models. Some owners reported that the H9 would jerk when shifting gears. After repairs, the 4S shop indicated that it was caused by poor matching between the engine and the transmission, not a quality issue with the transmission itself. 2. Audio system failure: The Haval H9's central control screen had a certain probability of going black during driving, after which the entire infotainment system became uncontrollable. 3. Engine oil leakage: This common problem did not occur in every vehicle and was a minority situation. However, some unlucky owners still encountered engine oil leakage, mainly due to poor sealing of the oil pan.

16

1

Share

What are the symptoms of a broken half shaft in the Magotan?

The half shaft deformation in the Magotan can cause severe shaking when driving. Here is the detailed introduction: 1. If a car's half shaft is deformed, it may produce abnormal noises and bumps when driving lightly, and in severe cases, the car may not be able to move, leading to phenomena such as the car pulling to one side and severe shaking. 2. Over time, the deformation of a car's half shaft can cause uneven tire wear. Below is an example based on the 2020 Magotan: 1. Body size: It is a mid-size car with a body length of 4865mm, width of 1832mm, height of 1471mm, a wheelbase of 2871mm, a fuel tank capacity of 66 liters, and a trunk capacity of 533 liters. 2. Power: The 2020 Magotan is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.

12

0

Share

How is the Song PLUS EV?

Why is the A4L reversing camera not switching?

Why was the Baojun RM5 discontinued?

What is the difference between Audi A7 and S7?

What Causes the Engine Malfunction Light to Illuminate in the Buick Excelle After Powering On?

Why does the H9 have such a bad reputation?

What are the symptoms of a broken half shaft in the Magotan?

Can I renew my driver's license in a different location when it expires?

Where to Renew a Driver's License?

Why do people prefer the Performance version of Model 3?

How long does it take for the Southeast V3 Lingyue's water temperature to become normal?