How is the reputation of the 2021 CR-V Black Knight Edition?

Is Rusting Common in Emgrand?

Rusting is not very common in Emgrand. Solutions for Rusting: Use ultra-fine sandpaper dipped in water to gently sand the rust spots, sanding in straight lines in the same direction. After completely cleaning the area, apply a layer of primer. For the undercarriage, consider applying chassis armor or sealing to protect against acid rain and corrosion, preventing the original protective layer from cracking or peeling. Continuous braking while driving can help remove rust. If the rust is severe, it is necessary to visit a repair shop to remove and sand the brake discs to eliminate the rust. Conduct regular inspections, frequently air out the carpets, or place some desiccants in the trunk. Causes of Rusting: Insufficient and incomplete electroplating and wax injection processes in the sheet metal. Neglecting scratches on the car paint, which can lead to rust over time. To maximize profits and reduce costs, manufacturers may use standard sheet metal.

17

1

Share

What are Volkswagen's three types of window films?

Volkswagen's three types of window films refer to films applied to different positions of the car. For example, the front windshield uses one type, while the side and rear windows use the third type. Precautions for applying window films: Volkswagen and other car manufacturers do not produce car window films themselves, so there is no such thing as an original factory film. If you want to apply a film, pay attention to the quality of the car film. Choose a high-quality film; otherwise, it may affect visibility while driving and could also damage the vehicle's paint. Functions of car window films: Blocking heat: In winter, it can reduce the loss of heat from inside the car, while in summer, it can reduce the entry of outdoor heat into the car, slowing down the rapid rise in interior temperature. Blocking ultraviolet rays: It reduces the amount of UV radiation entering the car, slowing down the aging of the vehicle's interior and protecting the skin of passengers from harm.

7

2

Share

Why does the Honda XRV automatic transmission stall when braking?

Honda XRV automatic transmission stalling when braking may be due to the activation of the auto start-stop system. Below are the specific reasons: Principle of auto start-stop stalling: The auto start-stop system is essentially a system that controls the engine's shutdown or ignition. Its core function is to automatically control the engine's shutdown or ignition based on vehicle speed and stopping time during driving, aiming to minimize fuel consumption and emissions during idling. It is primarily suitable for urban traffic situations such as waiting for traffic lights or being stuck in traffic. After the engine shuts down, the power supply can still replace the belt pulley to provide operating power for the engine cooling fan and the car's air conditioning system. Features of auto start-stop: The auto start-stop system has many advantages, such as reducing fuel consumption during idling, thereby saving fuel. In urban traffic situations like waiting for traffic lights or being stuck in traffic, it can significantly reduce the engine's idling time. However, frequent engine starts and stops can cause damage to related components such as the starter and battery. Additionally, due to the frequent repeated starts and stops of the engine, there is a higher demand for oil quality, which further increases maintenance costs.

20

5

Share

What is the reason for the sunroof not receiving power after installing one-key start in Geely Vision?

Geely Vision's sunroof not receiving power after installing one-key start is due to reasons such as a blown or loose fuse. The solution is to clean the sunroof's guide channel, check for any short circuits or loose connections, and address them promptly. Below are the operation instructions for the Geely Vision sunroof switch: Interior open/close: Gently press the interior open/close button (less than 0.3 seconds), and the glass panel will automatically open to the maximum interior position or fully close. During the automatic sliding of the glass panel, gently press the interior open/close button (less than 0.3 seconds), and the glass panel will stop sliding. Sunroof tilt open/close: Gently press the tilt open/close button (less than 0.3 seconds), and the glass panel will automatically tilt to the maximum position or fully close. During the automatic tilting of the glass panel, gently press the tilt open/close button (less than 0.3 seconds), and the glass panel will stop moving.

14

4

Share

Is the Audi A4 P218800 a fault?

Audi A4 P218800 fault may be caused by excessively high fuel pressure or a faulty fuel injector. Below are detailed explanations of the causes: Excessively High Fuel Pressure: Taking the M54 engine as an example. The standard fuel pressure at the fuel pump is 3.5 bar. If it is too high, the first consideration is whether the fuel filter is clogged; if it is too low, consider whether the fuel pump has insufficient power or there is an issue with the regulator. The standard pressure at the fuel rail is also around 3.5 bar. If it is too high, consider whether there is a regulator issue; if it is too low, it may be due to a clogged fuel filter or insufficient fuel pump power. Therefore, to determine what is causing the fuel pressure to be too high or too low, it is necessary to simultaneously check the fuel pressure at both the fuel pump and the fuel rail. Faulty Fuel Injector: When a fuel injector malfunctions, it can cause black smoke from the exhaust pipe, uneven operation of the cylinders, noticeable engine shaking, a drop in engine power, and weak acceleration when the accelerator pedal is pressed. If the fuel injector is clogged, it can prevent the injected gasoline from atomizing, which will affect engine operation. When a fuel injector leaks, it can cause an overly rich air-fuel mixture, making the engine difficult to start and resulting in black smoke from the exhaust pipe.

19

2

Share

How to Deal with Fogging on the Corolla Windshield?

Turn on the car's external air circulation, press the front and rear defogging buttons, and use warm air to defog. Defogging methods: Before starting the car, wipe the external water fog on the car windows with a towel. After wiping the external glass with the towel, start the car, turn on the air conditioning, set the air conditioning to the warm air mode, adjust to a higher temperature with red hot air, turn on the external air circulation, press the front and rear defogging buttons, and use warm air to defog. Manual air conditioning defogging: For manual air conditioning, turn the air direction adjustment knob to the defrost and defog mode. For automatic air conditioning, there is an independent defog button. When defogging is activated, the dehumidification function works and the fan speed increases. If the internal air circulation mode is in use, set the internal air circulation mode button to external circulation. Increasing the airflow and raising the temperature can quickly defog the windshield and front side windows. When defogging the windshield, pressing the defog button again can return to the previous mode.

1

2

Share

How is the reputation of the 2021 CR-V Black Knight Edition?

Is Rusting Common in Emgrand?

What are Volkswagen's three types of window films?

Why does the Honda XRV automatic transmission stall when braking?

What is the reason for the sunroof not receiving power after installing one-key start in Geely Vision?

Is the Audi A4 P218800 a fault?

How to Deal with Fogging on the Corolla Windshield?

What is the development history of the Volkswagen Touareg?

What is the fuel consumption of the 2016 Nissan Sylphy automatic transmission?

How to Turn Off the Headlights of Geely Xingrui?

Is the Edge Engine a Ward's Top 10 Winner?