How is the rear space of the Mercedes-Benz A180L?

1 Answers
VanKing
07/30/25 3:04am
Mercedes-Benz A180L offers relatively spacious rear seating. Mercedes-Benz A180L body dimensions: Length is 4622 mm, width 1796 mm, height 1454 mm, wheelbase 2789 mm. As a compact sedan with a 2789 mm wheelbase, the rear space performance is certainly generous, comparable to B-segment sedans. A 1.75-meter-tall passenger can even cross their legs comfortably in the rear seats, which feature a leather and fabric combination for good comfort. Mercedes-Benz A180L powertrain: Equipped with a 1.3T four-cylinder turbocharged engine delivering maximum output of 136 horsepower, peak torque of 200 Nm, and maximum power of 100 kW. The maximum torque range is 1460-4000 rpm. Paired with a seven-speed dual-clutch transmission. Fuel consumption is 5.3 liters per 100 km, 0-100 km/h acceleration time is 9 seconds, and top speed reaches 200 km/h.
Was this review help?
18
4
Share
More Forum Discussions

What vehicles can be driven after downgrading from a B2 to a C1 driver's license?

C1 license allows driving small and mini passenger vehicles, as well as light and mini cargo vehicles; light, small, and mini special-purpose vehicles. Below is a detailed introduction to the C1 driver's license: 1. Overview: The C1 driver's license is one of the codes for motor vehicle driving licenses. The C1 license covers driving small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini special-purpose vehicles (including all models under C2, C3, and C4). 2. Examination: The test subjects include traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving common sense, totaling four items.
2
5
Share

What to Do When the Key Won't Turn?

When the car key won't turn, you should try turning the key while steering the wheel. Here are some details about the issue: 1. Cause Analysis: This is most likely due to the activation of the steering wheel's automatic lock feature. The steering wheel lock is a simple anti-theft function. After the car is turned off, turning the wheel left or right or parking with the wheels not straight can cause the steering lock pin to engage with the steering column. 2. Solution: Insert the key, press the brake, and then turn the steering wheel left and right. While turning the wheel, turn the key to complete the steering wheel unlocking process.
17
4
Share

What Are the Consequences of Starting the Engine in Gear?

The consequences of starting the engine in gear include damage to the car's starter motor and parking brake, as well as wear and tear on mechanical components. It may also cause the vehicle to lurch forward, potentially leading to accidents. The car should be in neutral when starting, except when on a steep slope where being in gear can prevent the car from rolling backward. Here are some tips for shifting gears: 1. Shift gears according to the car's speed; 2. When the vehicle shakes, immediately downshift by one or two gears based on the situation; 3. Coordinate the clutch and throttle properly when shifting; 4. Master the correct hand position for shifting—place your palm downward over the head of the gear lever and grip it firmly with all five fingers; 5. Ensure the gear is fully engaged when shifting.
15
3
Share

How to Deal with Excessive Engine Bearing Clearance?

Engine bearing clearance excessive treatment method: There are adjustment shims on the engine bearing seat, and the clearance can be reduced by adding shims. However, this method is ineffective when the lateral clearance is too large, and only replacing new engine bearings is the solution. Engine bearings provide friction protection for connecting rods or crankshafts during high-speed operation. During engine use, incidents of bearing seizure and shaft burning occasionally occur. Bearing seizure and burning are mainly caused by the rupture of the lubricating oil film between the journal and the bearing, leading to friction between the bearing and the crankshaft. Under high temperature, high pressure, and high speed, the wear-resistant alloy layer of the bearing wears prematurely, causing the bearing alloy layer to peel off and adhere to the journal, resulting in mechanical failure of bearing seizure and shaft burning.
19
2
Share

How to upgrade the GS4 navigation system?

GS4 navigation system upgrade method is as follows: 1. First, download the navigation data file from the official website; 2. Prepare a blank USB flash drive and extract the file to the root directory of the USB drive. After extraction, there will be three files in the root directory; 3. Insert the USB drive into the car's USB port and start the navigation host. Simultaneously press AM/FM and SET, wait for 10 seconds to enter the engineering mode; 4. Click on version information, then click confirm. After the upgrade is completed, click OK, and the host will restart again. The car navigation system has GPS global satellite positioning system function, allowing you to know your exact location while driving. The car navigation system also features automatic voice navigation, optimal path search, and other functions.
1
0
Share

Which brand does the Hellcat belong to?

The Hellcat is a model under the Dodge Challenger brand. Dodge's headquarters is located in the United States, and the brand was founded by a pair of brothers born in Michigan, USA. The trademark uses the brothers' surname, Dodge, and the graphic trademark features a ram's head inside a pentagon. Dodge offers a range of vehicles including sedans, sports cars, MPVs, and SUVs. The Hellcat is the high-performance version of the Dodge Challenger, featuring a redesigned and upgraded full-body sports kit, with suspension tuning that is relatively stiffer. The bottom diffuser and large-diameter dual exhaust pipes further highlight its powerful performance. The front grille of the Hellcat adopts a black honeycomb mesh design, with an SRT badge embedded, making the front bumper look more sporty.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.