How is the real reputation of Baojun 360?

1 Answers
AugustDella
07/30/25 5:08am
The real reputation of Baojun 360 is quite good. Model Introduction: The Baojun 360 is a 6-seater family car tailored for young families by SAIC-GM-Wuling. Its differentiated functional positioning with three rows and six seats can meet the travel needs of the whole family, which is difficult to achieve with a 5-seater car. At the same time, its compact body size makes it more suitable for driving and parking compared to 7-seater cars, and its appearance is also favored by young people. On September 26, 2019, the Baojun 360 CVT model was officially launched. As a practical 6-seater family car, the new model comes in two variants: the 1.5L CVT Elite and the 1.5L CVT Luxury, priced at 74,800 yuan and 80,800 yuan respectively. Additionally, the Baojun 360 CVT version has been upgraded in terms of exterior and interior design. Exterior Design: The Baojun 360 features a highly original exterior design with sharp and prominent body lines. Its dignified yet youthful appearance caters to various daily driving scenarios. With compact dimensions of 4615*1735*1660mm, even female or novice family members can easily handle the car. The Baojun 360 adopts a new design language. The front fascia features a hexagonal grille paired with eagle-eye headlights. The CVT version of the Baojun 360 uses a new "Starlight Matrix" design language for the front grille, with a hexagonal grille filled with dot-matrix elements. On the side, the Baojun 360 has a waistline that runs from the front to the rear lights, complemented by sharp lines below that echo the rear design. The B/C/D pillars are blacked out, combined with a streamlined roof and spoiler, creating a floating roof effect. At the rear, the tailgate design features a slight angle between the rear window and the tailgate, with body lines that mirror the waistline below the side. The taillight contours are also more expansive.
Was this review help?
10
1
Share
More Forum Discussions

Can a slightly bulged tire still be used?

Tires with slight bulges cannot continue to be used, as continued use may lead to a blowout. Main causes of tire bulges: Crown separation. The crown mainly manifests as the delamination of the tire tread surface (referred to as the crown surface), specifically the top of the tread. The primary reason is excessive tire pressure during use, which reduces the tire's contact area with the ground, leading to premature wear. Additionally, rolling acceleration or poor heat dissipation during tire use can cause the tread temperature to rise; Shoulder separation. Shoulder separation is a type of sidewall bulge, categorized into localized and overall types, commonly found between the tread and sidewall of the tire; Bead separation. Mainly refers to radial truck tires. It primarily manifests as delamination around the rim. Issues during the bead wire closing process can cause the wire bead to crack and delaminate. The rubber around the bead wire area may age and delaminate due to high temperatures or problems with the rubber compound itself; Ply bulging. Mainly refers to passenger car radial tires that develop localized sidewall bulges due to excessive speed when passing over ditches, bumps, or road debris, causing the rim and ground to compress and fracture the tire sidewall. Precautions for handling tire bulges: When installing tires, visit a professional tire shop and use specialized tire installation equipment and procedures; Try to avoid driving on rough road conditions for extended periods. If unavoidable, keep the speed as slow as possible; Develop excellent tire maintenance habits. Regularly inspect tires, carefully checking the surface for potential hazards such as cracks, cuts, bulges, or excessive tread wear, and make adjustments as needed to prevent blowouts; In addition to regular tire inspections, vehicle owners should also develop the habit of checking and maintaining proper tire pressure, paying attention to the tire warranty period, and ensuring the use of 'healthy' tires for driving.
15
1
Share

How many liters of engine oil should be added to a Land Rover Range Rover diesel 3.0L model?

Land Rover Range Rover diesel 3.0L model requires 6 liters of engine oil. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing to prevent leaks, rust and corrosion prevention, as well as shock absorption and buffering. Taking the 2021 Range Rover model as an example, its body dimensions are: length 5000mm, width 2073mm, height 1869mm, with a wheelbase of 2922mm and a minimum ground clearance of 220mm. The 2021 Range Rover is equipped with a 3.0L turbocharged engine, delivering a maximum power of 265kW and a maximum torque of 495Nm, paired with an 8-speed automatic transmission.
13
3
Share

Can I Replace the Car Antifreeze Myself?

You can replace the car antifreeze yourself. The method for replacing antifreeze is as follows: 1. Open the car hood after the engine has cooled down; 2. Open the antifreeze reservoir cap; 3. Lift the vehicle and open the radiator drain plug, drain the old antifreeze, then reinstall the drain plug; 4. Lower the vehicle and pour new antifreeze into the antifreeze reservoir. Precautions for replacing antifreeze include: 1. Choose antifreeze with a low freezing point, high boiling point, and good anti-corrosion performance; 2. When replacing the antifreeze, ensure the old antifreeze is completely drained and the system is cleaned; 3. Check the hoses for any signs of aging and replace them if necessary; 4. Do not overfill or underfill the antifreeze—refer to the scale marks; 5. After adding antifreeze, wait for the fan to start running, indicating the antifreeze is working.
12
2
Share

What Are the Reasons for Loud Car Tire Noise?

The reasons for loud car tire noise are: 1. Air noise caused by the airflow between tire tread gaps and the disturbance of air around the tires; 2. Vibration of the tire body and tread patterns; 3. Road noise due to uneven road surfaces. The solutions to reduce car tire noise include: 1. Choosing quiet tires with finer tread patterns; 2. Attaching a layer of cotton fabric to the inner protective panel of the tires; 3. Driving at a slower speed. The functions of tires are: 1. Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; 2. Transmitting traction and braking torque to ensure good adhesion between the wheels and the road surface, thereby improving the car's power, braking, and off-road performance; 3. Working with the car suspension to cushion the impact during driving and dampen vibrations; 4. Protecting car components from severe vibrations and premature damage, adapting to the vehicle's high-speed performance, and reducing driving noise.
4
1
Share

How to Remove Spray Paint from Car Paint?

Spray paint on car paint can be removed by the following methods: 1. Wash the painted area and surrounding parts with water, then clean with a solvent; 2. Work the surrounding paint film into a smooth transition state from thin to thick, centered on the paint; 3. Use a rubber sanding block or other large sanding block with sandpaper for grinding; 4. Switch to fine sandpaper to continue grinding, to remove the marks left by coarse sandpaper. Car paint is a protective film sprayed on the car, which makes the body less prone to corrosion. Its performance characteristics include: 1. Good fullness, high gloss, high hardness, and good adhesion; 2. Excellent mechanical properties; 3. Gloss retention and wear resistance; 4. Good resistance to acid, alkali, alcohol, and gasoline.
1
5
Share

Is it suitable for the Mazda 3 Axela to use 92 or 95 octane gasoline?

It is suitable for the Mazda 3 Axela to use 92 octane gasoline. Gasoline is a volatile and flammable hydrocarbon mixture liquid distilled and cracked from petroleum, which can be used as fuel. Taking the 2021 Mazda 3 Axela as an example, its body dimensions are: length 4295mm, width 1798mm, height 1616mm, wheelbase 2570mm, and fuel tank capacity 40L. The 2021 Mazda 3 Axela is equipped with a 1.3T turbocharged engine and a CVT continuously variable transmission, with a maximum power of 121 kW, maximum power speed of 5600 rpm, maximum torque of 240 N·m, maximum torque speed ranging from 1500 to 4000 rpm. Its drive mode is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using a compound torsion beam non-independent suspension.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.