How is the quality of the 5GR-FE engine?

How long is the Teana's body size?

The Teana's body dimensions are 4901mm, 1850mm, 1450mm and 4901mm, 1850mm, 1447mm in two variants. Taking the Teana 2021 2.0L XE Fashion Edition as an example, its body structure is a 4-door, 5-seat sedan with a wheelbase of 2825mm. The Teana is equipped with a 2.0L naturally aspirated engine, paired with a continuously variable transmission, delivering a maximum horsepower of 156ps, a maximum power of 115kw, and a maximum torque of 197nm. The front suspension type is MacPherson independent suspension, and the rear suspension type is a trapezoidal control arm multi-link independent suspension.

9

5

Share

What does 'Check Tire Pressure' mean?

Check Tire Pressure indicates that one or more tires have insufficient or excessive air pressure. This is a tire pressure alarm triggered by abnormal tire pressure in vehicles equipped with a tire pressure monitoring system. You should immediately stop and check to ensure driving safety. Under-inflated or over-inflated tires can lead to abnormal tire wear, shorten tire lifespan, increase fuel consumption, and even raise the risk of a blowout. Tires are typically mounted on metal rims, supporting the vehicle body, cushioning external impacts, maintaining contact with the road, and ensuring driving performance. Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes during driving. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning properties.

7

5

Share

How to Use the Gear +M- in Toyota Wildlander?

Toyota Wildlander's M- gear usage method is to shift to the M gear, then push up or down to increase or decrease the gear. However, to upshift, the engine speed must reach the required level. The M gear is the manual mode, and the +- is used for shifting gears. Taking the Wildlander 2020 2.0L CVT Two-Wheel Drive Leading Edition as an example, its body dimensions are 4665mm in length, 1855mm in width, and 1680mm in height, with a wheelbase of 2690mm. The body structure is a 5-door, 5-seat SUV. The Wildlander is equipped with a 2.0L naturally aspirated engine, matched with a 10-speed continuously variable transmission, delivering a maximum horsepower of 171ps and a maximum power of 126kw. The front suspension type is MacPherson independent suspension, and the rear suspension type is E-type multi-link independent suspension.

20

0

Share

What are the reasons for the cigarette lighter in Audi A6 not having power?

The reasons for the cigarette lighter in Audi A6 not having power are: 1. Due to long-term use, repeated insertion and removal can cause the spring clip to loosen, resulting in the cigarette lighter not receiving power; 2. Repeated plugging and unplugging and improper use can cause a short circuit in the wiring, burning out the fuse. The fuse for the front cigarette lighter in the Audi A6L is located in the fuse box above the driver's foot pedal, while the fuse for the rear cigarette lighter is located in the fuse box on the right side of the trunk. Taking the Audi A6L 2021 40TFSI Luxury Elegance model as an example, its dimensions are 5038mm in length, 1886mm in width, and 1475mm in height, with a wheelbase of 3024mm. It is equipped with a 2.0T turbocharged engine, with a maximum power of 140kw, matched with a 7-speed dual-clutch transmission.

14

2

Share

How to Determine Poor Valve Sealing?

Methods to determine poor valve sealing include: 1. The oil seepage method—place the valve into the valve seat and pour gasoline on the top surface; if there is no leakage, it indicates good sealing. 2. The marking method—draw even lines on the working surface with a pen, then insert the valve into the valve seat and tap lightly; if any lines remain uncut, it indicates poor sealing. 3. The tapping method—lightly tap the valve on the valve seat several times and observe the working surface of the valve seat; if there is a bright and complete ring of light, it indicates the sealing meets the requirements. The function of the valve is to specifically input air into the engine and expel exhaust gases after combustion. Structurally, valves are divided into intake valves and exhaust valves. The intake valve's role is to draw air into the engine to mix with fuel for combustion, while the exhaust valve's role is to expel the combusted exhaust gases and dissipate heat.

18

1

Share

Is Changing Audi's Logo to Black Considered Vehicle Modification?

Changing Audi's logo to black is considered vehicle modification. Here is the relevant information: 1. Penalty: If caught by traffic police, you may be fined 500 yuan, have your vehicle license temporarily confiscated, and be ordered to restore the original appearance. This primarily constitutes trademark infringement and complicates accident investigations. 2. Regulations: China's "Safety Technical Specifications for Motor Vehicle Operation" stipulates that vehicle emblems must match the registered brand. Article 16 of the "Road Traffic Safety Law" prohibits any unit or individual from assembling motor vehicles or altering their registered structure, configuration, or characteristics without authorization.

1

2

Share

How is the quality of the 5GR-FE engine?

How long is the Teana's body size?

What does 'Check Tire Pressure' mean?

How to Use the Gear +M- in Toyota Wildlander?

What are the reasons for the cigarette lighter in Audi A6 not having power?

How to Determine Poor Valve Sealing?

Is Changing Audi's Logo to Black Considered Vehicle Modification?

What are the differences between the Magotan and Audi A4L?

Where is the cabin air filter located in a Mazda3?

How to Match Speed and Gear in Subject 3 Driving Test?

When the rear of the car deviates to the right while reversing, which way should the steering wheel turn?