How is the quality of Roewe cars?

1 Answers
DelAubrey
07/28/25 5:46pm
Roewe cars have good quality, with the following characteristics: 1. Chassis: It incorporates many technologies from SsangYong Motors, and the chassis is generally on the stiffer side; 2. Engine: Equipped with the Blue Core series engine, jointly developed by SAIC and General Motors. This engine offers decent fuel economy and power performance, ranking among the top in domestic brands; 3. Transmission: It uses a dual-clutch transmission, delivering power that surpasses competitors in the same class while maintaining fuel efficiency. Roewe is a car brand under Shanghai Automotive Industry Corporation (Group), targeting mid-to-high-end models in various market segments. Models like the Roewe 750, Roewe 550, Roewe 350, and subsequent products provide consumers with a "taste, technology, and realization" product and service experience.
Was this review help?
13
1
Share
More Forum Discussions

How to Set the Time on X-Trail?

First, press the vehicle's one-touch start button to start the vehicle; otherwise, adjustments cannot be made. The dashboard will display vehicle information. Then, use the multifunction steering wheel to switch to the time setting interface. After pressing "Clock Settings," the center console will display the options. Press the RES or SET buttons on the multifunction steering wheel to adjust the dashboard display. Repeat the above steps to set the time. Once the time is set, press the OK button on the left side of the multifunction steering wheel to confirm and apply the settings.
13
2
Share

How to Solve Front Wheel Wobble?

First, check the manufacturer's recommended tire pressure, which is typically set between 2.0 bar and 2.5 bar for most family cars. If the deviation worsens during braking, it is necessary to recheck the braking system and replace any faulty components.
8
0
Share

How to File an Insurance Claim for a Scratch on the Car?

First, the policyholder needs to call the insurance company's claim hotline to obtain a claim number. Then, take the claim number to the damage assessment center for evaluation. Next, the policyholder should take the damage assessment report to a repair shop. If the repair shop is a partner of the insurance company, the policyholder can leave after the repairs are completed. Then, the policyholder must personally visit the insurance company to provide the necessary documents, including the claim application, damage assessment report, repair invoice, repair list, and a copy of their ID card. Finally, the policyholder just needs to wait for the case to be settled.
10
1
Share

How to Repair Minor Scratches on Headlights?

You can use toothpaste for polishing, as toothpaste contains abrasive particles. Apply toothpaste to the headlight and then rinse it off with water. For longer scratches and cracks on car headlights, you can use fine wood sandpaper to sand them down, followed by polishing with polishing wax. The principle is similar to polishing the paint surface. Use nano-spray coating for renovation and repair, including sanding, degreasing, spray coating, and spectral hardening. The repair process strictly follows the original headlight manufacturing process.
17
1
Share

What methods can be used to remove asphalt from a car body?

First, use high-pressure water to rinse the car body for initial cleaning. If the adhered asphalt or other dirt remains, you can rinse these localized areas. Then, wash with soapy water. For asphalt with strong adhesion, you can purchase a specialized tar cleaner from an auto parts store. After cleaning, promptly wax and polish the car. Generally, polishing can remove traces left by previous dirt, followed by sealing the glaze.
13
3
Share

What are the two major mechanisms of an engine?

The two major mechanisms of an engine are the crank-connecting rod mechanism and the valve train. The valve train mainly includes components such as the camshaft, valves, valve springs, tappets, and push rods, while the core components of the crank-connecting rod mechanism are the piston, connecting rod, and crankshaft. Function of the valve train: According to the working cycle and firing order requirements of each cylinder in the engine, the valve train opens and closes the intake and exhaust valves of each cylinder at the right time, allowing fresh air to enter the cylinder promptly and exhaust gases to be expelled from the cylinder in a timely manner. During the compression and expansion strokes, it ensures the sealing of the combustion chamber. Function of the crank-connecting rod mechanism: It provides a combustion space, converts the expansion pressure of the gas generated after fuel combustion acting on the piston top into the rotational torque of the crankshaft, transforms the thermal energy released by fuel combustion into mechanical energy, and continuously outputs power. Engine working principle: The working chamber of a reciprocating piston internal combustion engine is called the cylinder, with the inner surface of the cylinder being cylindrical. The piston that reciprocates inside the cylinder is hinged to one end of the connecting rod via the piston pin, while the other end of the connecting rod is connected to the crankshaft. The crankshaft is supported by bearings on the cylinder block and can rotate within the bearings, forming the crank-connecting rod mechanism. When the piston reciprocates inside the cylinder, the connecting rod drives the crankshaft to rotate.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.