How is the new Santana 1.4?

What are the causes of the panoramic sunroof noise in the Roewe RX5?

Roewe RX5 panoramic sunroof noise causes: 1. The sunroof sealing rubber strip ages due to long-term exposure to rain or sunlight, leading to noise. Using rubber conditioner can temporarily restore the rubber strip's performance; 2. Loose sunroof screws causing ceiling noise; 3. Dust particles in the sunroof track. When dust accumulates to a certain extent, friction occurs during sunroof operation, resulting in noise. Car sunroof maintenance recommendations: 1. During car washing, avoid using a high-pressure water gun to directly spray the sealing ring; 2. On extremely bumpy roads, do not fully open the sunroof, as excessive vibration between the sunroof and the track may cause deformation of related components or even damage the motor. Also, strictly prohibit opening the sunroof during rain or car washing; 3. The biggest concern when using a sunroof is water leakage. Proper use and maintenance of the sunroof can effectively prevent leaks.

6

2

Share

How long does it take to pick up a Tesla?

Tesla vehicles are generally ready for pickup within ten days. Here are some important considerations for vehicle pickup: Inspecting the vehicle condition: Park the vehicle in an outdoor area with ample lighting. Examine the body paint for scratches, wear, uniformity, and transparency under sunlight reflection. Open the doors and locate the vehicle identification plate near the driver's side door or B-pillar to verify relevant information. Open the engine compartment to check for cleanliness, absence of dirt or dust accumulation, and adequate levels of engine oil and other fluids. Manually test door operation, window functionality, presence of strong odors, air conditioning cooling performance, wiper operation, and proper lighting function. Test drive: Start the engine to assess idle stability, noticeable cabin noise, and steering wheel vibration. Document verification: Ensure all vehicle documents are complete, including purchase invoice, certificate of conformity, vehicle type approval certificate, vehicle registration certificate, warranty certificate, owner's manual, and new vehicle delivery checklist.

10

5

Share

What do E and F on the car fuel gauge represent?

E and F on the car fuel gauge represent the remaining amount of gasoline in the fuel tank. F indicates that the fuel tank is full, while E indicates that the fuel tank is empty. When the fuel gauge needle points to F, it means there is sufficient gasoline, and the driver can drive with confidence. When the needle approaches E, it indicates that the fuel is nearly depleted, and the warning light on the fuel gauge will illuminate to remind the driver to refuel. Precautions for car fuel gauge: 1. Do not wait until the warning light comes on to refuel, as too little fuel will adversely affect the normal operation of the fuel pump and reduce its service life; 2. Do not fill the tank completely when refueling, because gasoline expands when heated and evaporates into gasoline vapor under high summer temperatures, requiring space to accommodate this; 3. If the fuel gauge needle shows a lower position than before after the car has been parked overnight and restarted, it can be considered a malfunction, and the car should be checked before departure.

8

3

Share

What is the actual fuel consumption of the BMW X3?

The comprehensive fuel consumption of the BMW X3 is 8.4-8.7L/100km. Currently, there are 3 models of the BMW X3 available for sale: the xDrive30i Leading M Night Package, the modified xDrive30i Premium M Night Package, with a comprehensive fuel consumption of 8.7L/100km. The xDrive25i M Sport Package has a comprehensive fuel consumption of 8.4L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 9.5-14.0L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits inside the engine. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send wrong information to the engine control unit, causing incomplete fuel combustion and increased carbon deposits in the engine. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older cars, various faults may inevitably occur.

19

5

Share

Can ETC be uninstalled after installation?

ETC can be uninstalled after installation. However, if the ETC device is removed by the user, it will become invalid because the ETC device has an anti-tamper feature. There is a small switch on the back of the ETC electronic tag; once it is peeled off the windshield, the internal switch will automatically shut off. Therefore, the vehicle's registration certificate must be presented to the ETC service provider for reactivation. ETC Billing Principle: There will be one or more ETC lanes on highways. Through microwave-specific short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to conduct background settlement with the bank, achieving the goal of paying road and bridge tolls without stopping at the toll booth. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: The efficiency of vehicles passing through ETC lanes can theoretically increase by 2-3 times or more, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the main indicators of the "13th Five-Year" comprehensive transportation development plan: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the adoption rate of ETC for passenger vehicles, efforts will be made to promote the use of ETC for trucks in the future. There will also be exploration of deep integration between the ETC system and smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications.

1

0

Share

What does 0W30 engine oil mean?

The number 0 before the W represents the viscosity at low temperatures. The smaller the number, the better the fluidity at low temperatures and the stronger the cold resistance. The number 30 refers to the viscosity at 100°C. The larger the number, the higher the viscosity and the better the high-temperature resistance. 0W30 engine oil means that the oil can flow normally at -35 degrees Celsius. The viscosity of engine oil should not be too high or too low. If the viscosity is too low, it will increase engine wear. If the viscosity is too high, it will affect the increase in resistance during engine operation, leading to reduced engine power and increased fuel consumption. When the engine is running, the oil forms a film on the surfaces of various engine components, which can reduce friction between them and lower the operating resistance within the engine. If the oil viscosity is too low, the oil cannot form a stable film, which will exacerbate engine wear. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand low temperatures of -30°C. The smaller this number, the better the low-temperature fluidity. 0W is -35°C; 5W is -30°C; 10W is -25°C; 15W is -20°C; 20W is -15°C; 25W is -10°C. The lower the number, the smoother the cold start of the vehicle. The second number represents the kinematic viscosity of the oil at 100°C. The higher the number, the better the oil can maintain its viscosity at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. Relatively speaking, the better the low-temperature fluidity, the smoother the cold start for the vehicle, and the better the protection for the engine. For fully synthetic oil, the recommended replacement interval is one year or 10,000 kilometers. For semi-synthetic oil, the replacement interval is slightly shorter, requiring replacement every 7,000 kilometers or six months. When choosing engine oil, the following points should be noted: Engine oil should be selected according to the engine's requirements. It is unnecessary to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. Multi-grade oil should be preferred. Multi-grade oil is economical, long-lasting, and efficient, providing better protection for the engine. Due to its characteristics, multi-grade oil may appear darker and have lower oil pressure than conventional oil during use, which is normal. Since engine oil significantly affects the performance and lifespan of the engine, it should be strictly selected according to the specifications in the vehicle's manual, including the same series, service grade, and viscosity grade. The oil recommended in the vehicle's manual is based on the engine's performance and the temperature conditions of the sales region, providing certain guidance and leaving a considerable safety margin.

9

3

Share

How is the new Santana 1.4?

What are the causes of the panoramic sunroof noise in the Roewe RX5?

How long does it take to pick up a Tesla?

What do E and F on the car fuel gauge represent?

What is the actual fuel consumption of the BMW X3?

Can ETC be uninstalled after installation?

What does 0W30 engine oil mean?

Is the BMW X4 imported or domestically produced?

How many seconds does the Hyundai ix35 take to accelerate from 0 to 100 km/h?

How many kilometers can a Tesla portable charger charge per hour?

How to start a Volvo XC60?